Special battery-powered saw for the toughest applications. Ideal for sawing wood and poroton up to strength class 12 N/mm².

Durable, low-vibration and recoilless double saw blade system with quick saw blade stop within 3 seconds.

Reinforced sword for higher accuracy, more precise cuts and significantly longer service life.

• Saw blade length:430mm

Scope of delivery:

• 2 batterys 
• charger

Supplied consumables:

• special saw blade for cutting e.g. poroton, hollow bricks

Powerful 830 Watt hammer drill with SDS-plus and quick-change drill chuck for universal applications. A fast all-rounder for daily use on the construction site or around the house.

• Drill-Ø in concrete with hollow core bits max. 68 mm
• Drill-Ø concrete 4 - 26 mm
• Drill-Ø metal max. 13 mm
• Drill-Ø wood max. 30 mm Impact energy 2.7 J (Ideal for e.g. chiselling tiles, chiselling cable slots etc.)

Scope of delivery:

• Quick-change drill chuck
• Exchangeable chuck SDS-plus
• depth stop
• additional handle

Supplied consumables:

• SDS-plus drill bit set Ø 6/8/10 mm 
• SDS-plus pointed chisel
• SDS-plus flat chisel
• Chisel grease

SDS-max hammer drill for comfortable handling in time-consuming applications.

Fast drilling progress and high removal rate.

Vibration control and low weight allow effortless operation in continuous and time-consuming applications.

• Drill-Ø in concrete with hollow core bits 40 - 90 mm
• Drill-Ø concrete 12 - 40 mm
• Impact energy 8.8 J

Scope of delivery:

• Additional handle

Supplied consumables:

• pointed chisels
• flat chisels 
• fettube 
• drill 18mm
• drill 30mm

 Powerful 18 Volt SDS-plus battery-powered hammer drill with optimum power-to-weight ratio.

• Drill-Ø in concrete 4 - 26 mm
• Impact energy 2.6 J

Scope of delivery:

• Additional handle
• depth stop
• Quick charger
• 2 x Battery

Supplied consumables:

• SDS-plus drill bit set Ø 6,8,10 mm
• Flat chisel
• Pointed chisel

Lightweight SDS-plus hammer for comfortable continuous use. This power tool is suitable for chiselling in concrete, masonry, wood and tiles.

• Impact energy 2.6 J

Scope of delivery:

• Additional handle

Supplied consumables:

• Pointed chisel
• tile chisel
• flat chisel
• fettube

Powerful SDS-max impact hammer with very high stock removal rate.

The specialist for breakthroughs and demolition work.

Extreme impact force with 16.8 Joule for high stock removal rate

Low vibration during operation and idling. 

Scope of delivery:

• Additional handle

Supplied consumables:

• flat chisel
• pointed chisel
• fettube

High-performance demolition hammer with 28 mm hexagon socket for demolition work in concrete and stone.

• 62 Joule impact energy for maximum demolition performance.

Scope of delivery:

• Transport trolley for GSH 27

Supplied consumables:

• Pointed chisel
• flat chisel

Powerful 125mm angle grinder for high work throughput thanks to powerful 1,300 watt motor with Constant-Electronic. User protection through KickBack Control, restart protection, torsion-proof protective hood and reduction of vibrations.

Scope of delivery: 

• Additional handle
• mounting flange
• clamping nut
• protective hood
• two-hole wrench

Supplied consumables:

• Cutting disc Ø 125 mm for metal 

1300 watt high torque impact drill for the heaviest applications with high diameters (drilling, working with hollow core bits and hole saws) as well as screwing and stirring. Constant-Electronic for more comfortable working, keeps speed constant even under load. Torque control for high precision: Torque preselection for even screw insertion. 

Scope of delivery:

• Quick-action drill chuck
• depth stop
• additional handle

Supplied consumables:

• Multi-purpose drill set 8 pieces, Ø 3.0 - 8.0 mm

Powerful concrete grinder with a motor power of 1500 watts for high

Work progress, even under load. Movable protective hood element allows grinding directly to the edges of floors, walls and ceilings.

Supplied consumables:

• Diamond cup wheel Ø 125 mm

Demolition hammer with 30 mm hexagon socket for demolition work in concrete and stone.

The powerful motor delivers 41 joules of impact energy for outstanding removal performance.

Scope of delivery:

• Additional handle

Supplied consumables:

• Pointed chisel
• flat chisel
• fettube

Powerful angle grinder with 230 mm disc diameter.

Optimum handling due to low weight. Vibration control main and additional handle reduces vibrations by up to 50 % for fatigue-free work.

Scope of delivery:

• Mounting flange
• clamping nut
• protective hood
• two-hole wrench
• Additional handle Vibration Control

Supplied consumables:

• Cutting disc Ø 230 mm for metal
• Diamond saw blade Ø 230 mm for concrete 

Fast tile laying with additional line at 45°

Projects in addition to the two laser lines at an angle of 90° a third line at 45° for precise and fast alignment and laying of wall and floor tiles.

High accuracy of 0.2 mm/m

• Working range up to 20 m

Scope of delivery:

• aligning washer
• laser target

Supplied consumables: 

• 4 x 1.5 V-LR6 battery (AA)

Professional concrete mixer with handwheel and foot brake for easy operation. With 240 mm plastic elastic wheels, restart protection and GS test protection.

• Motor power: 700 watts
• Drum volume: max. 145 litres
• Protection class: II
• Protection class: IP45
• Net weight: 54 kg
• Dimensions LxWxH: 126 x 68 x 132 cm

Robust 2-speed agitator for universal requirements.

• Powerful and powerful for all material viscosities.
• Top ergonomics due to upright working position and handle shape.
• Electronic speed control
• Ideal quantity per mixture 65 litres

 Consumables supplied:

• Mixing tool MK 140 HF
• Mixing tool WK 140 HF

Robust cable drum with 3-way protective contact sockets

• splash-proof
• 40m 3x2,5mm²
• 230 Volt
• H07RN-F

Extension cable

25 m 3 x 2.5mm²

230 Volt

H07RN-F

Extension cable

50 m 3 x 2.5mm²

230 Volt

H07RN-F

400 V extension cable

25 m 5 x 2,5mm² with CEE plug

H07RN-F

16 A

400 V CEE Extension cable

50 m 5 x 2,5mm²

H07RN-F

16 A

High-performance SDS-max hammer drill for heavy-duty chiselling work.

This hammer drill is suitable for drilling up to a diameter of 52 mm as well as for heavy chiselling work in concrete and stone.

It features constant speed, restart protection, overload clutch, speed preselection and vibration control for effortless operation in continuous and time-consuming applications.

• Drill-Ø in concrete with hollow core bits
• up to max.150 mm
• Drill-Ø concrete 12 - 52 mm
• Impact energy 19 J

Scope of delivery: 

• Additional handle

Supplied consumables: 

• 1 x pointed chisel
• 1 x flat chisel
• 1x Fettube

Professional, leading vibratory plate with electric motor and a plate size of 450 x 583 mm.

No exhaust / no emissions, ideal for use in indoor and poorly ventilated areas.

8 mm thick, robust base plate for optimum compression.

• Integrated, foldable chassis.
• Engine power : 2.2 KW
• Voltage : 230 Volt
• Centrifugal force : 16.0 kN
• Weight : 97 kg
• Collection best in pairs , or with suitable aids .

Stone and concrete are not much of an obstacle for the powerful wall groover.

The two 150-millimetre diamond discs are driven by a powerful 1400-watt motor.

The "Constant Electronic" system ensures a constant speed so that the wall groover works quickly and swiftly through the masonry.

• The distance between the two discs can be adjusted between 3 and 39 millimetres as required
• in depth up to 35 millimetres

Afterwards, the remaining web can simply be broken out.

• The scope of delivery includes three 4-millimetre and four 6-millimetre spacer discs
• a mounting flange
• a tool for breaking out the remaining masonry bar
• a workman's case
• a round nut
• and a cranked two-hole spanner

 Supplied consumables: 

• 2 diamond blade 

Powerful 18 Volt battery angle grinder with 125mm disc diameter and speed preselection adjustable in three steps. Optimum handling due to low weight.

Scope of delivery: 

• Transport case
• receiving flange
• clamping nut
• two-hole wrench
• Additional handle
• 2 batteries
• charger

Supplied consumables: 

• Cutting discs Ø 125 mm for metal 

Powerful stone cutting saw. 

• Smooth-running roller table with adjustable side stop. 
• Cooling water supply by electric water pump. 
• Easy cleaning due to combination of water tray with overflow plug and bucket.
• Easy to load and transport due to foldable feet, transport rollers, carrying handles and crane eyes.

Technical data :

• max. cutting depth approx.100 mm (with 350mm slide disc)
• max. cutting length 600 mm
• Mains voltage 230 V

 Supplied consumables :

• Diamond disc 350mm for concrete

Tile cutting machine for easy and clean work.

• Removable water tray - Easy cleaning and filling of water Pivoting cutting table - cuts from 0 - 45° are possible.
• Low weight (11kg) -
• Good handling and easy transport
• Max. Cutting depth at 90° 34 mm
• Max. Cutting depth at 45° 24mm

Scope of delivery :

• Transport case
• Slide disc Classic Ceramic

Rental Delivered Consumables :

• Slide disc 180mm Classic Ceramic

Light, professional, leading vibratory plate with electric motor and a plate size of 488 x 380 mm.

No exhaust / no emissions, ideal for use in indoor and poorly ventilated areas.

8 mm thick, robust base plate for optimum compression.

Retractable handle, perfect for transport and storage.

• Engine power : 1,5 KW
• Voltage : 230 V
• Centrifugal force :12,0 kN
• Weight : 50 kg

For rimless grinding of medium-hard concrete, screed, cement terrazzo and leveling of uneven floors.

Sanding close to the edge with a sanding head that can be swiveled on both sides.

• Working width 250mm
• Speed 1450 rpm
• Nominal voltage 230 V
• Rated frequency 50 Hz
• Rated current 8A
• Rated/output power 2.2KW
• Weight 62kg

The suction socket has a diameter of 50mm, a suitable suction cup can be rented separately from us.

• Always use the spirit level to align the machine before putting it into operation.

Included supply :

• dust cover

Built Diamonds :

• EX-GC 40E for medium-hard concrete, screed, cement terrazzo

Single-disc machine for a wide range of applications.

For example, sanding and oiling wooden parquet floors, or cleaning exposed aggregate concrete slabs.

• Working width 420mm 
• Voltage 230 V 
• Input power 1800 Watt 
• Adjustable speed 57-171 rpm 

We also offer a suitable dust extraction system: Schwamborn STS 130

Electric tile cutter with water cooling.

Ideal for cutting wall and floor tiles.

• max. cutting depth at 90° 55 mm at 45° 35 mm
• mains voltage 230 V
• Weight 28kg

Supplied consumables :

• Diamond cutting disc 250x25,4mm

Ideal dust extraction for e.g. our single disc machine and diamond grinding machine.

Can be used anywhere where a normal vacuum cleaner is not sufficient.

Suitable for the construction industry with effective filter cleaning.

• Suction hose 5m
• mains voltage 230 V
• Power consumption 1.2 KW

Lightweight effective hammer drill for drilling and light chiselling work in stone and concrete.

• Ideal for drilling up to 26 mm.
• Power consumption 800 Watt
• single impact strength 2.4 Joule
• Drill performance drill bit up to 68 mm
• Tool taper SDS-Plus

Scope of delivery :

• Transport case
• quick-change chuck
• SDS quick-change chuck
• SDS Plus drill bit
• 6 100/165mm
• 8 100/165mm
• 10 100/165mm
• Flat, pointed and tile chisel
• chisel grease

The percussion drill drills effortlessly through wood, metal and stone.

• Power consumption 1.010 Watt
• Clamping neck 43mm
• Drilling capacity in wood 40 mm
• Drilling capacity in steel 16 mm
• Drilling capacity in masonry 20 mm
• Drill chuck clamping width 1.5 - 13 mm
• With constant electronics and bright LED

Scope of delivery :

• Transport case
• Handle with depth stop
• Universal drill 4,5,6,8 mm

Powerful hammer drill for drilling stone and concrete.

• Ideal for drilling up to 28 mm and light chiselling work.
• With additional vibration damping by spring-mounted handle.
• Power consumption 800 Watt
• single impact strength 2.8 Joule
• Drill power Drill bit 80 mm
• Tool taper SDS-Plus
• Electronically adjustable number of revolutions and impacts With bright LED

Scope of delivery :

• Transport case
• quick-change chuck
• SDS quick-change chuck
• Flat + pointedchisel
• chisel grease

Handy caulking hammer with high stock removal rate.

With AVT anti-vibration technology

Vibration-damped handle.

SoftNoLoad for less vibration and precise chisel positioning.

• Power consumption 1110 Watt
• single impact strength 8.1 Joule
• Weight 5.6 kg
• Tool taper SDS-Max

Scope of delivery :

• Transport case
• handle
• Flat + pointed chisel
• chisel grease

Powerful impact hammer with very high stock removal rate.

The specialist for breakthroughs and demolition work.

With anti-vibration technology AVT

Electronic impact number and impact strength adjustment

• Power consumption 1,510 watts
• Single impact strength 18.6 joules
• Weight 10.8 kg
• Tool taper SDS-Max

Scope of delivery :

• Transport case
• U-shaped handle
• Flat + pointed chisel
• chisel grease

Handy, powerful 18 volt cordless impact drill with switchable percussion mechanism.

Ideal for most applications.

• Torque adjustable in 16 steps.
• Maximum torque 45Nm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• bit set
• Multi-purpose drill set 4,5,6,8,10,12mm
• Wood twist drill set 3,4,5,6,7,8,9,10mm

For drilling, hammer drilling and chiselling.

• With quick-change drill chuck for cylindrical drills.
• Single impact strength 2.0 Joule
• Drilling capacity in concrete 24 mm
• Drilling capacity in wood 27 mm
• Drilling capacity in steel 13 mm
• Tool holder SDS Plus

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Quick-change chuck SDS
• quick-change chuck
• handle
• depth stop
• Flat chisel , Pointed chisel
• concrete drill
• 6 100/165 mm
• 8 100/165 mm
• 10 100/165 mm

Very handy battery angle grinder with electronic speed control.

Grinding wheel diameter 125 mm

bore 22,23 mm

Max. Cutting depth 29 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Cutting disc 125x1mm
• Roughing disc 125x6mm

With the diamond drill, you can drill holes perfectly in masonry and sand-lime brick using the dry drilling method.

To fix the drill stand you need a percussion drill or hammer drill , and a 16mm concrete drill bit to set the fixing dowels !!!!

Connection thread R 1/2" + 1 1/4" UNC

Voltage (V/Hz) 230/50~60

Speed (min-1) load: 600/ 960/ 2780

Motor power 2 KW

Drill stand

Guide rail made of aluminium profile

Carrying handle for easy transport

Feed carriage: roller guide with eccentric adjustment

Double support of the column to the rear

Column infinitely adjustable up to 45

Sturdy dowel foot with integrated adjustment screws

Slide lockable

Quick coupling enables quick and easy assembly/disassembly of the drill motor on the drill rig

Scope of delivery :

• Drill motor in transport case
• Drill stand P-250
• 3 pcs. dowels and screw-in tool Fischer FDBB 16/50 for fastening the drill stand

Powerful angle grinder with 230 mm disc diameter.

Optimum handling due to soft start and low weight.

Power consumption 2200 Watt

Max. Cutting depth 68mm

Ideal for steel and concrete work.

Scope of delivery :

• Diamond cutting disc for concrete work 
• steel saw blade

Diamond socket countersink 68mm for e.g. sockets, can be used in: Masonry sand-lime brick Poroton and similar abrasive materials.

• Use without impact, absolutely pre-drill (6mm).
• Centring drill is only used for guiding when setting up, then removing. and finish drilling without centring drill.

Scope of delivery :

• 68mm socket drill bit
• Center drill 6,5mm
• drift wedge
• Recording 6-kt.
• Recording SDS-Plus

Diamond can countersink 82mm for e.g. junction boxes, can be used in: Masonry sand-lime brick Poroton and similar abrasive materials Use without impact, absolutely pre-drill (6mm). Centring drill is only used for guiding when setting up, then removing. and finish drilling without centring drill.

Scope of delivery :

• 82mm socket drill bit
• Center drill 6,5mm
• drift wedge
• Recording 6-kt.
• Recording SDS-Plus

Powerful handy angle grinder with a disc diameter of 125mm.

Power consumption 1100 Watt.

Mains voltage 230 Volt

Scope of delivery :

• Transport case
• Metal saw blade 125x1mm
• Flange,Clamping nut,Wrench

Ideal for the removal of concrete residues, for levelling, cleaning or light roughening of floors and walls and for the removal of old plaster and structures.

Scope of delivery :

• Transport case
• diamond cup wheel

For fast and precise creation of slots and channels in masonry.

Easy handling due to pulling cut.

Super-Joint system prevents setbacks and blockages, effectively protecting machine and user.

Technical data :

• Power consumption 1.400 Watt
• Idle speed 10,000 min-1
• Saw blade Ø / bore 125/22.33 mm

Scope of delivery :

• Transport case
• diamond discs
• face spanner
• 6-Kt L-key 6mm

Diamond dry core drill Ø 61mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 81mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 111mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 131mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 151mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 161mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Rubber / protection mat suitable for our Belle electric vibratory plate PCLX16 45E .

So that, for example, the plaster does not get scratches and scrapes when shaken off.

Battery impact wrench Bosch GDS 18 V-LI HT

• High torque (650 Nm) for hard screw applications in metal (M 12 - M 20) and concrete
• Idling speed 0-1,900 rpm
• Torque, max.650 Nm
• Beat rate 0-2,100 bpm
• Battery voltage 18 V
• Tool holder 1/2" external square

Supplied accessories :

• Socket wrench inserts 77mm long SW 10 - 27 mm
• 10,11,13,17,19,21,22,24,27 mm

Powerful rechargeable percussion drill !

Technical data :

• Torque (soft/hard/max.) 47/85/- Nm
• Idle speed (1st gear / 2nd gear) 0 - 480 / 0 - 2,100 rpm
• Stroke rate, max. 31,500 min-1
• Drill chuck clamping range, min./max. 1.5 / 13 mm
• Battery voltage 18 V Torque steps 25 + 1

Drill diameter :

• drill-Ø wood, max. 82 mm
• Drill-Ø Steel, max. 13 mm
• Drill-Ø Masonry, max. 16 mm

Supplied accessories :

• 2 batteries
• Battery charger
• Bitset
• Multi-purpose drill set
• Wood drill set

Cordless angle grinder Bosch GWS 18V-SC

Small angle grinder with the same power as a wired grinder with 1,000 watts thanks to brushless EC motor.

• Idle speed 4,500 - 9,000 rpm
• Battery voltage 18 V
• Grinding spindle thread M 14
• Drill hole 22,23 mm

Supplied accessories :

• 2 batteries 5,0 Ah
• Battery charger
• Cutting discs 125 x 1 mm metal

Wet/dry vacuum cleaner Bosch GAS 35M AFC

Versatile wet/dry vacuum cleaner with automatic filter cleaning.

L-BOXX can be clicked on as a practical transport and storage solution for mobile use

Permanent suction power for continuous work progress through automatic filter cleaning (AFC)

As a certified safety vacuum cleaner of dust class M according to EU standard, it covers most of the dust for high user protection

• Max. input power 1,380 W
• Weight 12,4 kg
• Gross tank volume 35 l
• Tank volume net 23 l
• Tank volume net water 19.2 l
• Dust class Wet/dry vacuum cleaner M
• Dust class M
• Tool dimensions (width) 450 mm
• Tool dimensions (length) 515 mm
• Tool dimensions (height) 575 mm
• Filter area 6.150 cm²Max.
• Air flow velocity (turbine) 74 l/sMax.
• negative pressure (turbine) 254 mbar

The Bosch SDS max impact hammer for convenient handling in time-consuming applications

Vibration control and light weight allow effortless operation in continuous and time consuming applications

The powerful motor delivers 8.3 joules of impact energy for high stock removal

Technical data :

• Rated input power1.150
• Impact energy 2 - 8.3 J
• Stroke rate at nominal speed 1,300 - 2,900 bpm
• Tool holder SDS max
• Voltage, electrical230 V

Supplied accessories :

• Point Chisel
• Flat chisels
• Grease

Moisture meter Gann Hydromette Compact B

The Compact B is an electronic building moisture indicator with non-destructive measuring method according to the dielectric constant/high frequency measuring principle.

With LCD display and flexibly applicable ball probe for detecting moisture in building materials of all kinds and for detecting the distribution of moisture in walls, ceilings and screeds and other set building materials.

Especially suitable for parquet and tile layers .

Handy quick moisture indicator in pocket size for lightning fast single or series measurements

Power supply:

• 9 V block battery

Building moisture:

• 0 - 100 digits Scan range

Fresh concrete in walls and formwork can be effectively compacted with a submersible vibrator. 

The vibrator bottle allows the trapped air bubbles to rise and escape through vibration. 

This compacts the concrete sustainably. 

Careful compaction increases the quality of the erected concrete part.

Technical data :

• Bottle diameter : 40 mm
• Bottle length : 330 mm
• Rated power : 650 W
• Supply voltage : 230 V

scrubbing brush nylon/wire hard

The suitable attachment for Schwamborn single disc machine STR 581, for cleaning e.g. paving slabs, terrace slabs.

diameter 420 mm

The GBH 4-32 DFR Professional is the most powerful SDS plus hammer drill.

This power tool is suitable for drilling and chiselling in concrete, masonry, wood and metal.

Technical data:

• Rated input power 900 W
• Impact energy 4.2 J
• Stroke rate at nominal speed 0 - 3,600 bpm
• Rated speed 0 - 800 min-1
• Weight 4,7 kg
• Tool holder SDS-plus
• Voltage, 230 V

Drilling range :

• drill-Ø concrete, hammer drill 6 - 32 mm
• Max. drill-Ø masonry, drill bits90 mm
• Max. Drill diameter in metal 13 mm
• Max. drill-Ø wood 32 mm

Scope of delivery :

• Drill chuck SDS-Plus
• Drill chuck (3 jaws)
• SDS drill set 6,8,10mm
• SDS Pointed chisel
• SDS flat chisel
• Fat tube 

Kärcher wet/dry vacuum cleaner NT 30/1 Tact L

For effective and quick cleaning of machines, vehicles, workshops and construction sites.

Thanks to the automatic filter cleaning system Tact and the moisture-resistant PES flat-fold filter, the compact all-purpose vacuum cleaner convinces in the dust-free removal of large quantities of fine dust over long working intervals.

• Filter bags are not included as the vacuum cleaner has an automatic filter cleaning system (Tact).

Technical data :

• Air flow rate (l/s)74
• Vacuum (mbar/kPa)254 / 25.4
• Tank capacity (l)30Max.
• input power(W)1380
• Standard nominal diameter35
• Sound pressure level (dB(A))69
• Container materialPlastic
• Number of current phases (Ph)1
• Frequency (Hz)50 - 60
• Voltage (V)220 - 240
• Weight (kg)13,5
• Dimensions (L × W × H) (mm)560 x 370 x 580

Scope of delivery :

• suction hose with elbow (2,5 m)
• wet/dry floor nozzle, 360 mm
• crevice nozzle
• 2 suction pipe, stainless steel 0.55 m
• flat-fold filter, PES

Universally applicable for all design elements found in gardening and landscaping due to large adjustable opening range.

Technical data :

• Gripping range W (mm): 0-550
• Immersion depth E (mm): 210
• Jaw length L (mm): 200
• Load capacity (kg): 200
• Dead weight (kg): 12

The compact 18V battery cartridge press - for cartridges up to 310 ml capacity.

• Speed preselection with 9 speed settings and trigger for variable speed easy regulation of the material flow
• Thanks to 3.5 kN pressure force and a maximum feed rate of 8 mm/s, fast working progress even with viscous adhesives
• Thanks to the automatic reverse function, the pressure on the plunger rod is stopped when the trigger is released, preventing dripping or leaking of the material

Included accessories :

• 2 rechargeable batteries
• Charger

For laying concrete and natural stone slabs.

• Gripping range 330- 620 mm
• Load capacity 60 kg

The tamping foot is specially designed for tamping sand, soil or chippings in hard-to-reach places.

Ideal for places where the use of a vibrator is impossible or not recommended.

• Weight 9 kg
• Surface 200x200 mm 
• Stick height 76 cm

Practical electronics tool assortment for the handyman or do-it-yourselfer.

Consisting of :

• Bricklayer's chisel 250x16 mm
• Electrician's chisel 4kt. 250x10x7 mm
• Locksmith's hammer 500 g
• Open-ended spanner adjustable 0 - 25 mm
• Water pump pliers 250 mm
• Automatic wire stripper 
• Multiple pliers 180 mm
• VDE Side cutters 160 mm
• VDE Flat round nose pliers 200 mm
• VDE Flat round nose pliers angled 200 mm
• VDE Wire strippers 160 mm
• VDE Cable shears 200 mm
• Universal cable knife blade length 50 mm
• Electrical insulating tape black
• Spatula 60 mm
• Offset screwdriver set hex SW 1,3 , 1,5 ,2 , 2,5 , 3 , 4 ,5 ,6 ,8 ,10 mm
• VDE Screwdriver slotted 0.4x2.5 0.8x4.0 1.0x5.5 1.2x6.5 mm
• VDE Screwdriver cross slot PH 0 , 1 , 2
• Voltage tester slot 220-250V 3 mm
• Voltage tester Duspol expert 12 - 1000 Volt
• Electrical cabinet spanner
• Wooden ruler 2 m

Powerful cordless impact drill !

Technical data :

• Torque (soft/hard/max.) 31/60/- Nm  
• Idle speed (1st gear / 2nd gear) 0 - 600 / 0 - 1900 min-1
• Impact speed, max. 28,500 min-1
• Chuck clamping range, min./max. 1.5 / 13 mm
• Battery voltage 18 V 
• Torque steps 20 + 2

Drill diameter :

• Drill-Ø wood, max. 38 mm
• Drill-Ø steel, max. 13 mm
• Drill-Ø masonry, max. 13 mm

Included accessories :

• 2 batteries
• Charger
• Bit set
• Multi-purpose drill bit set
• Wood drill bit set

Small forward-moving vibratory plate for the most common applications in repairs and repair work in earthworks, asphalt and paving.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Working width : 450 mm
• Centrifugal force : 18 kn
• Own weight : 90 kg
• Fuel : Petrol

The vibratory plate CF 1 Hd is used for compaction in confined areas, for light repair work and paving work in gardening and landscaping.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Working width : 350 mm
• Centrifugal force : 10 kn
• Own weight : 60 kg
• Fuel : Petrol



High operating comfort, compact dimensions and optimal running characteristics characterise the forward running vibratory plates CF 2 Hd.

Their field of application is compaction tasks in gardening and landscaping as well as repair work.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Working width : 450 mm
• Centrifugal force : 15 kn
• Own weight : 83 kg
• Fuel : Petrol

Plastic mat / Vulkalan mat for Bomag vibratory plate BVP 18/45

For gentle vibration of the pavement.

This machine was specially developed for the high demands of vibrating paved surfaces and slabs. 

The roller vibrator rolls gently over the material. This prevents the slabs or paving stones from shifting or even breaking off corners and edges. 

Sensitive concrete slabs with a relatively low thickness can thus be gently pressed into the bedding.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data: 

• Working width: 420 mm 
• Fuel: petrol
• Power: 3.6 kW 
• Centrifugal force: 8 kN 
• Frequency: 100 Hz  
• Weight: 108 kg 

The machine was specially developed for the high demands of jogging large-format panels. 

The VPR 700 rolls gently over the material. This prevents the panels from shifting or even breaking out corners and edges. 

While the VPR 700 is especially suitable for larger surfaces, the VPR 450 is more suitable for smaller surfaces or slabs up to 30 cm edge length.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data: 

• Working width: 670 mm
• Fuel: petrol
• Power: 3.6 kW
• Centrifugal force: 14 kN
• Frequency: 100 Hz
• Weight: 175 kg

By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate. 

Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed. 

Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone. 

As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data: 

• Fuel: Hatz diesel
• Power: 3.1 kW
• Working width: 530 mm
• Centrifugal force: 25 kN
• Working speed: 20 m/min.  
• Frequency: 85 Hz 

By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate. 

Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed. 

Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone. 

As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data:

• Fuel: Hatz diesel
• Power: 3.1 kW
• Working width: 630 mm
• Centrifugal force: 35 kN
• Working speed: 20 m/min
• Frequency: 80 Hz
• Operating weight: 248 kg

Plastic mat / Vulkalan mat for Bomag vibratory plate BP 20/50

For gentle vibration of the pavement.

Plastic mat / Vulkalan mat for Weber MT vibrating plate CF 1 Hd

For gentle vibration of pavement etc.

Plastic mat / Vulkalan mat for Weber MT vibrating plate CF 2 Hd

For gentle vibration of pavement etc.

The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.

Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Engine Honda petrol
• Power 2.6 kilowatts
• Working width 350 millimetres
• Centrifugal force 15 kilonewtons
• Working speed max. 20 metres per minute
• Frequency 100 Hertz
• Operating weight CECE 92 kilogrammes

Plastic mat / Vulkalan mat for Weber MT vibrating plate CR 1 Hd

For gentle vibration of pavement etc.

The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.

Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Honda petrol engine
• Power 3.6 kilowatts
• Working width 450 millimetres
• Centrifugal force 25 kilonewtons
• Working speed max. 21 metres per minute
• Frequency 100 Hertz
• Operating weight CECE 143 kilogrammes

Plastic mat / Vulkalan mat for Weber MT vibrating plate CR 2 Hd

For gentle vibration of pavement etc.

By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate.

Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed.

Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone. 

As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data:

• Fuel: diesel 
• Power: 6,7 kW
• Working width: 680 mm 
• Working speed: 25 m/min
• Frequency: 66 Hz
• Weight: 440 kg 

The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.

Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Hatz diesel engine
• Power 3.5 kilowatts
• Working width 500 millimetres
• Centrifugal force 35 kilonewtons
• Working speed max. 20 metres per minute
• Frequency 80 Hertz
• Operating weight CECE 206 kilogrammes

Plastic mat / Vulkalan mat for Weber MT vibrating plate CR 3

For gentle vibration of pavement etc.

By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate.

Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed.

Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone. 

As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data:

• Fuel: diesel 
• Power: 6,8 kW
• Working width: 680 mm 
• Working speed: 25 m/min
• Frequency: 66 Hz
• Centrifugal force: 55 kN
• Weight: 482 kg 

The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.

Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Engine Hatz diesel
• Power 5.4 kilowatts
• Working width 550 millimetres
• Centrifugal force 42 kilonewtons
• Working speed max. 20 metres per minute
• Frequency 75 Hertz
• Operating weight CECE 281 kilogrammes

Plastic mat / Vulkalan mat for Weber MT vibrating plate CR 5

For gentle vibration of pavement etc.

By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate.

Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed.

Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone. 

As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data:

• Fuel: diesel 
• Power: 6,7 kW
• Working width: 680 mm 
• Working speed: 25 m/min
• Frequency: 68 Hz
• Centrifugal force: 60 kN
• Weight: 487 kg 

The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.

Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Engine Hatz-Diesel
• Power 3.1 kilowatts
• Working width 400 millimetres
• Centrifugal force 25 kilonewtons
• Working speed max. 25 metres per minute
• Frequency 85 Hertz
• Operating weight CECE 150 kilogrammes

Due to their great manoeuvrability, rammers are suitable for use in confined areas such as narrow trenches and in shoring.

In addition, they can be used for repair work and repairs in earthworks, pipe and pipeline construction, trench and canal construction.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data:

• Fuel: petrol
• Power: 2.8 kW
• Working width (tamping foot): 280 mm
• Impact force: 18.2 kN
• Weight: 62 kg

Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 25/40 D

For gentle vibration of plasters, etc.

Due to their great manoeuvrability, rammers are suitable for use in confined areas such as narrow trenches and in shoring.

In addition, they can be used for repair work and repairs in earthworks, pipe and pipeline construction, trench and canal construction.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data:

• Fuel: petrol
• Power: 2.8 kW
• Working width (tamping foot): 280 mm
• Impact force: 18.3 kN
• Weight: 66 kg

The particularly light SRV 300 vibratory tamper was specially developed for tamping under pipes and conduits - for compaction in so-called pipe spandrels in trenches.

It can also be used for compacting edge areas of footpaths or when installing drainage.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data:

• Fuel: petrol
• Power: 1 kW
• Working width (tamping foot): 140 mm
• Impact force: 9.1 kN
• Weight: 32 kg

Due to their great manoeuvrability, rammers are suitable for use in confined areas such as narrow trenches and in shoring.

In addition, they can be used for repair work and repairs in earthworks, pipe and pipeline construction, trench and canal construction.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data: 

• Fuel: petrol
• Power: 2.8 kW
• Working width (tamping foot): 280 mm
• Impact force: 15 kN
• Weight: 58 kg 

The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.

Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Engine Hatz-Diesel
• Power 3.1 kilowatts
• Working width 500 millimetres
• Centrifugal force 25 kilonewtons
• Working speed max. 25 metres per minute
• Frequency 85 Hertz
• Operating weight CECE 155 kilogrammes

Due to their great manoeuvrability, rammers are suitable for use in confined areas such as narrow trenches and in shoring.

In addition, they can be used for repair work and repairs in earthworks, pipe and pipeline construction, trench and canal construction.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data: 

• Fuel: petrol 
• Power: 2.8 kW
• Working width (tamping foot): 280 mm
• Impact force: 17 kN
• Operating weight: 68 kg 

Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 25/50 D

For gentle vibration of plasters, etc.

The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.

Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Engine Hatz-Diesel
• Power 3.1 kilowatts
• Working width 600 millimetres
• Centrifugal force 35 kilonewtons
• Working speed max. 27 metres per minute
• Frequency 80 Hertz
• Operating weight CECE 225 kilograms

Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 35/60 D

For gentle vibration of plasters, etc.

The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.

Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Engine Hatz diesel with electric start
• Power 3.1 kilowatts
• Working width 600 millimetres
• Centrifugal force 40 kilonewtons
• Working speed max. 27 metres per minute
• Frequency 80 Hertz
• Operating weight CECE 280 kilogrammes

Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 40/60 D

For gentle vibration of pavement etc.

Due to highest compaction and area performance, the reversible vibratory plate is especially applicable in road construction and civil engineering up to paving.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Engine Hatz-Diesel
• Power 7.5 kilowatts
• Working width 590 millimetres
• Centrifugal force 55 kilonewtons
• Working speed max. 24 metres per minute
• Frequency 72 Hertz
• Operating weight CECE 412 kilogrammes

Plastic mat / Vulkalan mat for WeberMT vibrating plate CR 6 .

For gentle vibration of pavement etc.

Equipped with electric starter, the classic areas of application are soil and asphalt compaction, paving, path, road and track construction, backfilling, trench and canal construction, gardening and landscaping, but also foundation construction.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Engine Hatz diesel
• Power 9.3 kilowatts
• Working width 700 millimetres
• Centrifugal force 70 kilonewtons
• Working speed max. 28 metres per minute
• Frequency 66 Hertz
• Operating weight CECE 575 kilogrammes

Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 70/70 D

For gentle vibration of plasters, etc.

Particularly compact dimensions and a minimal swivel radius.

This makes it ideal for use in confined spaces, for example in landscaping or on inner-city construction sites.

New boom geometry for max. overloading height of 2,705 mm.

High stability due to hydraulically adjustable running gear from 980 mm to 1,300 mm

Extra-long and -high dozer blade adaptable to track width

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 1865 KG
• Power 15,6 PS
• Digging depth 2390 mm
• Width 980 mm - 1300 mm
• Height 2360 mm

Attachments incl.

• 1 x ditching bucket
• 1 x backhoe bucket

Emission-free excavating thanks to electric drive.

Equally powerful electric motor.

Narrow width of 750 mm - passage possible in confined spaces.

High stability due to hydraulically adjustable undercarriages from 750 mm to 1,020 mm.

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 1295 kg
• Power 12 PS
• Digging depth 1755 mm
• Width 750 mm - 1020 mm
• Height 2190 mm

Attachments incl. :

• 1 x ditching bucket
• 1 x backhoe bucket

Particularly compact dimensions and a minimal swivel radius.

This makes it ideal for use in confined spaces, for example in landscaping or on inner-city construction sites.

New boom geometry for max. overloading height of 2,705 mm.

High stability due to hydraulically adjustable running gear from 980 mm to 1,300 mm

Extra-long and -high dozer blade adaptable to track width

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 1865 KG
• Power 15,6 PS
• Digging depth 2390 mm
• Width 980 mm - 1300 mm
• Height 2360 mm

Attachments incl.

• 1 x ditching bucket
• 1 x backhoe bucket

Emission-free excavating due to electric drive.

Particularly compact dimensions and a minimal swing radius.

This makes it ideal for use in confined spaces, for example in landscaping or on inner-city construction sites.

New boom geometry for max. overloading height of 2,705 mm.

High stability due to hydraulically adjustable undercarriages from 980 mm to 1,300 mm.

Extra long and high dozer blade adaptable to track width.

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 1905 kg
• Power 15,1 PS
• Digging depth 2390 mm
• Width 980 mm -1300 mm
• Height 2255 mm

Attachments incl. :

• 1 x ditching bucket
• 1 x backhoe bucket

Universal, handy cut-off machine.

The 350 mm cutting disc of the powerful Motorflex enables cutting depths of up to 125 mm in concrete, stone, asphalt, construction steel or through iron pipes.

Technical data :

• Displacement 66.7 cm³
• Power 3.2/4.4 kW/hp
• Weight 9.7 kg 1)
• Sound pressure level 98 dB(A) 2)

Remote-controlled multi-purpose compactor.

With an operating weight of just under 1.6 t, the multi-purpose compactor achieves outstanding compaction results when compacting soil in trench, canal and pipeline construction.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 1,595 kg
• Power 14,5 Kw
• Working width 710 mm
• Fuel Diesel

Fresh concrete in walls and formwork can be effectively compacted with a submersible vibrator. 

The vibrator bottle allows the trapped air bubbles to rise and escape through vibration. 

This compacts the concrete sustainably. 

Careful compaction increases the quality of the erected concrete part.

A built-in RCD protects the operators against earth leakage and short circuits.

The internal vibrators are equipped with 5 m protective hose and 10 m connection cable.

Technical data :

• Bottle diameter : 58 mm
• Bottle length : 420 mm
• Rated power : 1050 W
• Supply voltage : 230 V

Fresh concrete in walls and formwork can be effectively compacted with a submersible vibrator.

The vibrator bottle allows the trapped air bubbles to rise and escape through vibration.

This compacts the concrete sustainably.

Careful compaction increases the quality of the erected concrete part.

Technical data :

• Motor power (input): 1,2 kW
• Bottle diameter : 38 mm
• Bottle length : 390 mm
• Frequency : 200 Hz
• Weight : 2,3 kg

This all-round electric cut-off machine minimises water, dust and mud build-up.

Unlike other electric cut-off machines, the cut-off wheel rotates forward, allowing efficient cut-off work with little strain on the operator.

The integrated regulator controls the amount of water, ensuring a constant supply of water to the cut-off wheel.

• Includes diamond cutting disc 350 mm Ø for concrete.

Technical data :

• Input power 2.7 kW
• Voltage 220-240 V
• Max. Cutting depth 125 mm
• Max. Cutting disc diameter 350 mm
• Mounting diameter 25.4 mm

Our Cut-n-Break method is the natural choice when you need to cut deep. 

With the K 4000 Cut-n-Break you can cut up to 400 mm from one side. 

Suitable for flush cutting close to walls and floors, and for smaller jobs such as window openings where you want to avoid overlapping corners.

Technical data :

• Input power 2.7 kW
• Voltage 220-240 V
• Max. Cutting depth 400 mm
• Max. Cutting disc diameter 230 mm

The masonry band saws from LISSMAC are specially designed for the processing of aerated concrete, as well as for various bricks and prove themselves on every construction site. 

Technical data: 

• Cutting height: 510 mm 
• cutting length: 700 mm 
• saw band length: 3.750 mm 
• Power: 1,1 k W / 400 V

The large cutting length makes the table saw particularly suitable for cutting long stone slabs.

With their infinitely adjustable, precise and smooth-running pendulum cutting saw heads, they ensure fatigue-free working.

For mitre cuts, the saw's superstructure can be infinitely tilted from 0° to 45°.

Technical data:

• max. cutting depth: 100 millimetres (with 350 mm slide disc)
• max. cutting length: 1250 millimetres
• Mains voltage 230 V

Supplied consumables:

• Diamond disc 350mm for concrete

For cutting large-format building blocks made of concrete, Poroton or sand-lime bricks.

Technical data:

• Cutting depth: 370 mm
• Cutting length: 960 mm
• Blade: 900 -1000 mm.
• Power: 7.5 kv / 400 v

The diamond cut-off saw is ideal for use on masonry work platforms (MAB) and where space is limited, thanks to its compact and vertical design. 

Specially designed for plane element and large block processing.

Technical data:

• max. cutting depth: 420 millimeters
• max. cutting length: 650 millimeters
• max. blade Ø: 1000 millimeters
• bore: 60 millimeter

Universal, handy cut-off machine.

The 350 mm cutting disc of the powerful Motorflex enables cutting depths of up to 125 mm in concrete, stone, asphalt, construction steel or through iron pipes.

Technical data :

• Output power 4.8 kW
• Displacement 93.6 cm³
• 2-stroke engine
• Max. Cutting depth 125 mm
• Max. Cutting disc diameter 350 mm
• Mounting diameter 20/25.4 mm

Universal, handy cut-off machine.

The 350 mm cutting disc of the powerful Motorflex enables cutting depths of up to 125 mm in concrete, stone, asphalt, construction steel or through iron pipes.

Technical data :

• Output power 3.7 kW
• Displacement 73.5 cm³
• 2-stroke engine
• Max. Cutting depth 125 mm
• Max. Cutting disc diameter 350 mm
• Mounting diameter 20/25.4 mm

All-round band saw. Work completely without water in dry cutting.

Effortless cutting of edges in curved cut.

For stone work from soft to hard.

Technical data: 

• Cutting height: 505 mm 
• Cutting height without suction: 520 mm 
• Cutting length: 660 mm 
• Loadable up to 100 kg
• Power: 2.2 kW / 400 V

Lightweight, compact floor saw, ideal for sawing concrete floors and repairing car park surfaces and asphalt pavements.

Technical data:

• Cutting depth up to 170 mm
• Power: 8.7 kW / 11.8 hp
• Engine type: petrol
• Cutting depth adjustment: hand wheel
• Feed: manual

Optionally with diamond disc for asphalt or concrete

Lightweight, compact floor saw, ideal for sawing concrete floors and repairing car park surfaces and asphalt pavements.

Technical data:

• Engine power: 8.7 kW
• Engine type: petrol
• Engine start: Reverse start
• Cutting depth adjustment: hand wheel
• Feed: manual
• Cutting depth max. 200 mm

Optionally with diamond blade for asphalt or concrete

Lightweight, compact floor saw, ideal for sawing concrete floors and repairing car park surfaces and asphalt pavements.

Technical data:

• Cutting depth max 189 mm
• Power: 8,7 kW
• Engine type: petrol
• Cutting depth adjustment: hand wheel
• Feed: manual

Optionally with diamond blade for asphalt or concrete

Concrete and screed milling machine for small to medium sized areas.

The low centre of gravity ensures smooth running and fast, even milling results when removing uneven floors, protrusions, removing markings, milling off coatings.

Technical data:

• Voltage 230 V
• Frequency 50 Hz
• Output power 2.2 kW
• Working width 200 mm
• Working weight 77 kg
• Ø suction 50 mm
• Dimension LxWxH 94 x 37,5 x 90 cm
• Type of slats Carbide slats

A robust powerful multi-purpose machine .

Equipped with a 2300 W powerful motor, metal gear drive and extra strong guide bar bearing, the machine is suitable for demanding applications on the construction site.

Technical data :

• Gear drive, metal
• Voltage 230 V
• Frequency 50 Hz
• Input power 2300 W
• Working width 510 mm
• Working weight 58.5 kg
• Rotational speed, tools 156 min-1
• Brush pressure 38 g/cm2
• Torque 110 Nm
• Guide bar length 930 mm
• Noise level 62 dB(A)

Incl. trowel, trowel plate or spring steel brush

A robust powerful multi-purpose machine with infinitely variable speed control from 78 to 156 min-1.

Equipped with a 2200 W powerful motor, metal gear drive and extra strong guide bar bearing, the machine is for demanding applications on the construction site.

Technical data:

• Gear drive, metal
• Voltage 400 V
• Frequency 50 Hz
• Output power 2.2 kW
• Working width 510 mm
• Working weight 66 kg
• Speed, tools 78-156 min-1
• Brush pressure 43 g/cm2
• Torque 135 Nm
• Guide bar length 1200 mm
• Noise level 62 dB(A)

Incl. trowel , trowel plate or spring steel brush

Compact multi-purpose machine with petrol engine and speed control.

The powerful STR 703 in petrol version is extremely robust and ideally suited for use in places without power supply.

The extra powerful 3.6 kW engine also enables use in difficult conditions.

Technical data:

• Petrol drive
• Output power 3.6 kW
• Working width 510 mm
• Working weight 59 kg
• Speed, tools 0-136 min-1
• Brush pressure 38 g/cm2
• Torque 0-212 Nm
• Guide bar length 1200 mm
• Noise level 63 dB(A)

Incl. trowel , trowel plate or spring steel brush

Lightweight, compact floor saw, ideal for sawing concrete floors and repairing car park surfaces and asphalt pavements.

Technical data:

• Cutting depth max 162 mm
• Power: 8,7 kW
• Engine type: petrol
• Cutting depth adjustment: hand wheel
• Feed: manual

Optionally with diamond blade for asphalt or concrete

Erschütterungsfreies Nassbohren in Mauerwerk und Beton ermöglicht dieses Kernbohrgerät, das durch die platzsparende Fußplatte selbst Arbeiten auf engstem Raum zulässt. 

Das Stativ ist dabei aus leichtem und stabilem Aluminium gefertigt.

Universal diamond wet core bit Ø 61mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 61mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 71mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 81 mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal Diamant Nassbohrkrone Ø 51mm

Nutzlänge 400mm

Anschluss 1 1/4" UNC Muffe

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 101mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 111mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 121 mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 131mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 151 mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 161mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 171mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 181 mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

Universal diamond wet core bit Ø 201 mm

Useful length 400mm

Connection 1 1/4" UNC socket

• We only rent out diamond core bits in conjunction with our core drilling rig !

For mounting on our mini-excavators Takeuchi TB 216 / 1.6 - 2.0 T

Attachment Lehnhoff MS 01 with Taklock / quick coupling system

Technical data :

• Operating weight 90 kg
• Power 9 kW
• Diameter of insertion tool 45 mm
• Working length of the tool 265 mm
• Working pressure 100 - 150 bar
• Impact frequency 750 - 2300 blows/min
• Sound power level 115 dB(A)

For mounting on our mini-excavators Takeuchi TB 210 / 1,1 - 1,3 T

Record Lehnhoff MS 01

Technical data :

• Operating weight 55 kg
• Power 7 kW
• Diameter of insertion tool 40 mm
• Working length of the tool 255 mm
• Working pressure 100 - 150 bar
• Impact frequency 750 - 1700 blows/min
• Sound power level 117 dB(A)

The Bosch SDS max impact hammer for convenient handling in time-consuming applications

Vibration control and light weight allow effortless operation in continuous and time consuming applications

The powerful motor delivers 8.3 joules of impact energy for high stock removal

Technical data :

• Rated input power1.150
• Impact energy 2 - 8.3 J
• Stroke rate at nominal speed 1,300 - 2,900 bpm
• Tool holder SDS max
• Voltage, electrical230 V

Supplied accessories :

• Point Chisel
• Flat chisels
• Grease

SDS-max hammer drill for comfortable handling in time-consuming applications.

Fast drilling progress and high removal rate.

Vibration control and low weight allow effortless operation in continuous and time-consuming applications.

• Drill-Ø in concrete with hollow core bits 40 - 90 mm
• Drill-Ø concrete 12 - 40 mm
• Impact energy 8.8 J

Scope of delivery:

• Additional handle

Supplied consumables:

• pointed chisels
• flat chisels 
• fettube 

High-performance SDS-max hammer drill for medium-heavy chiselling work.

This hammer drill is suitable for drilling holes up to a diameter of 45 mm and for medium-heavy chiselling work in concrete and stone.

Technical data :

• Power: 1.5 kW / 230 V
• Impact energy: 12,5 J
• Drill bit holder: 12 - 45 mm SDS-max
• Hollow drill bit: up to 125 mm
• Weight: 9,5 kg

 Supplied consumables:

• Pointed chisel
• Flat chisel 
• Grease tube

Powerful SDS-max impact hammer with very high removal rate.

The specialist for breakthroughs and demolition work.

Extreme impact force with 16.8 joules for high removal rate

Low vibration during operation and idling. 

Scope of delivery:

• Auxiliary handle

Supplied consumables:

• Flat chisel
• Pointed chisel
• Grease tube

Demolition hammer with 30 mm hexagon socket for demolition work in concrete and stone.

The powerful motor delivers 41 joules of impact energy for outstanding removal performance.

Scope of delivery:

• Additional handle

Supplied consumables:

• Pointed chisel
• flat chisel
• fettube

Heavy-duty demolition hammer with 28 mm hexagon socket for demolition work in concrete and stone.

62 joules of impact energy ensure maximum demolition performance.

Supplied consumables:

• Pointed chisel
• Flat chisel

The Probst vacuum attachment stone magnet SM-600 is a handy, powerful and mains-independent load attachment. ,

It is used in conjunction with any lifting gear for laying suction-proof stone slabs, concrete elements, steps, vitrified clay pipes, etc.

We have various suction plates for different applications (on request).

Technical data :

• Operating voltage : 12 V
• Dead weight : 34 kg
• Load capacity : 600 kg

The powerful vacuum blower sucks up even highly porous slab coverings and exposed aggregate concrete surfaces quickly and safely.

The load capacity with handles is 140 kg.

In conjunction with the corresponding suction plates and the suspension eye with chain safety device, it can safely lift and move VS-EH elements weighing up to 200 kg.

We have various suction plates for different applications (on request).

Technical data :

• Power supply 230 V 50 Hz
• Power consumption 1.5 kW 
• Dead weight 20 kg
• Temperature range +3 to +40 °C
• Noise level (DIN 45 635) <78 dB(A)

Construction prop according to EN 1065

• Adjustment range 1.76-3.00 m
• Material / Surface steel painted
• prop lock steel galvanised
• Load capacity see download link "Assembly instructions
• Weight 14 kg

Construction prop according to EN 1065

• Adjustment range 2.04-3.50 m
• Material / Surface steel painted
• prop lock steel galvanised
• Load capacity see download link "Assembly instructions
• Weight 16,5 kg

Construction prop according to EN 1065

• Adjustment range 2.34 - 4.00 m
• Material / Surface steel painted
• prop lock steel galvanised
• Load capacity see download link "Assembly instructions
• Weight 18 kg

Construction prop according to EN 1065

• Adjustment range 3.03 - 5.50 m
• Material / Surface steel galvanised
• prop lock steel galvanised
• Load capacity see download link "Assembly instructions
• Weight 31,4 kg

Window support size 1

• Weight 7.8 kg
• Material / Surface painted steel
• Load capacity 15kN 
• Adjustment range 0.95-1.50 m
• Column lock Lacquered steel

Window support size 2

• Weight 9,4 kg
• Material / Surface painted steel
• Load capacity 15kN
• Adjustment range 1.25 - 2.00 m
• Column lock lacquered steel

Inclined support size 1 

• Weight 17 kg
• Material / surface steel lacquered
• Adjustment range1,80-3,00 m
• prop lock lacquered steel
• Tensile and compressive force see download link "Assembly instructions
• Joint perforation Ø 17 mm / Ø 27 mm

Inclined support size 2

• Weight 21 kg
• Material / surface steel lacquered
• Adjustment range 2.10 - 3.65 m
• prop lock lacquered steel
• Tensile and compressive force see download link "Assembly instructions
• Joint perforation Ø 17 mm / Ø 27 mm

Tripod stand for slabs / formwork props

Column head for floor props

Universal stacking frame

• Weight 25 kg
• Material / surface steel lacquered
• Load capacity 1000kg
• Test TÃœV GS
• Standard/Regulation DIN EN 13626
• inside dimensions LxWxH 120x80x70 cm
• stackable 4-fold

Edge grinder for ergonomic concrete grinding.

The edge grinder for fast, easy and back-friendly grinding of floor edges without stressing the knees.

The swivelling grinding head allows working in three positions: Left-Right-Straight.

The free-floating dust guard ensures jam-free and low-vibration edge sanding.

• Working width 250mm
• Speed 1450 rpm
• Rated voltage 230 V
• Rated frequency 50 Hz
• Rated current 8 A
• Rated/output power 2.2KW
• Weight 62 kg

Always align the machine using the spirit level before commissioning.

Accessories supplied :

• Dust cover

Single-disc sanding machine for removing e.g. tile adhesive.

It thoroughly removes adhesives, varnishes, epoxy layers and filler.

With a grinding width of 280mm it is suitable for small to medium concrete surfaces.

Technical data :

• Voltage 220-240 V
• Rated current 13 A
• Output power 2,2 kW
• Diameter of grinding cup 280 mm
• Grinding wheel speed 1,410 rpm
• Max. grinding pressure 25 kg
• Weight 76 kg

Excess for damage to machine 500,- €

The PF 20 formwork beams impress with their high dimensional stability and low weight.

Rounded beam ends.

• Length 2.45 metres

The PF 20 formwork beams impress with their high dimensional stability and low weight.

Rounded beam ends.

• Length 2.90 metres

The PF 20 formwork beams impress with their high dimensional stability and low weight.

Rounded beam ends.

• Length 3.30 metres

The formwork beams PF 20 convince with high dimensional stability and low weight.

Rounded beam ends.

• Length 3.60 metres

The formwork beams PF 20 convince with high dimensional stability and low weight.

Rounded beam ends.

• Length 3.90 metres

The formwork beams PF 20 convince with high dimensional stability and low weight.

Rounded beam ends.

• Length 4.90 metres

Stone and concrete are not much of an obstacle for the powerful wall groover.

The two 150-millimetre diamond discs are driven by a powerful 1400-watt motor.

The "Constant Electronic" system ensures a constant speed so that the wall groover works quickly and swiftly through the masonry.

• The distance between the two discs can be adjusted between 3 and 39 millimetres as required
• in depth up to 35 millimetres

Powerful stone cutting saw. 

• Smooth-running roller table with adjustable side stop. 
• Cooling water supply by electric water pump. 
• Easy cleaning due to combination of water tray with overflow plug and bucket.
• Easy to load and transport due to foldable feet, transport rollers, carrying handles and crane eyes.

Technical data :

• max. cutting depth approx.100 mm (with 350mm slide disc)
• max. cutting length 600 mm
• Mains voltage 230 V

 Supplied consumables :

• Diamond disc 350mm for concrete

Screening bucket suitable for our mini excavators 

• Mounting Lehnhoff MS 01

The TEX 10 air hammer proves its versatility when working with soft and medium-hard materials such as bricks through to hard concrete.

With the instant-start technology, the chisel tip remains in the advised position and thus enables precise working.

The effective silencer makes working with the tool easier and more enduring.

Technical data :

• Weight: 10.5 kg
• Length: 520 mm
• Air consumption: 17 l/s
• Impact frequency: 1,350 blows/min
• Mounting: 22x82,5 mm
• Vibration level: 22.4 m/s²
• Sound power level: 103 dB(A)
• Sound pressure level: 91 dB(A)

The TEX 12 air hammer proves its versatility when working with soft and medium-hard materials such as bricks through to hard concrete.

With the instant-start technology, the chisel tip remains in the advised position and thus enables precise working.

The effective silencer makes working with the tool easier and more enduring.

Technical data :

• Weight: 10.5 kg
• Length: 550 mm
• Air consumption: 21.3 l/s
• Impact frequency: 1,600 blows/min
• Mounting: 25x75 mm
• Vibration level: 15.4 m/s²
• Sound power level: 105 dB(A)
• Sound pressure level: 93 dB(A)

The TEX 20PS is a medium-duty breaker for maintenance and general demolition work.

It features a long piston stroke and therefore a harder impact performance than standard breakers of comparable size.

It is the best choice for medium-hard material applications where light weight or low air demand is required.

Technical data :

• Weight: 10.5 kg
• Length: 550 mm
• Air requirement 1.5 (m³/min) 
• Impact frequency: 1,140 blows/min
• Mounting: 25x75 mm
• Vibration level: 18.3 m/s²
• Sound power level: 105 dB(A)
• Sound pressure level: 93 dB(A)

The Power Injector blasting gun can be used for the same work as a pressure blasting unit and the system shows clear advantages in mobility.

Area of application

• Water connection for dust-free blasting
• Surface preparation
• Removal of paint, rust, dirt and scale
• Roughening of surfaces
• Subsequent blasting of already assembled components

Technical data :

• Air consumption 4.8 m³/min (7bar)
• Area performance 5 - 10m²/ hour
• Water pressure > 2 bar
• Water consumption 0 - 2.5 l / min
• Blasting medium suitable for all common blasting media
• Max. Blasting medium grain size 1.5 mm
• Blasting medium consumption 50 - 150 kg/h
• Blasting pressure 0 < > 12 bar
• Max. Hose length 10m (suction hose)

Scope of delivery :

• Compressed air hose 20 m 
• Container

Universal diamond wet core bit Ø 251 mm

Useful length 400mm

connection 1 1/4" UNC socket

• We rent diamond core bits only in connection with our core drilling rig !

Universally applicable for all design elements found in gardening and landscaping due to large adjustable opening range.

Technical data :

• Gripping range W (mm): 0-550
• Immersion depth E (mm): 210
• Jaw length L (mm): 200
• Load capacity (kg): 200
• Dead weight (kg): 12

The Probst step relocation tongs TSZ Uni are suitable for gripping and relocating steps, kerbs, edge angles and the like with a hoist.

• max. load capacity 600 kg
• gripping range 50 - 600 mm
• Jaw length 350 mm
• Immersion depth 185 mm

The VZ I profile moving clamp is specially designed for moving curbs.
The one-sided angle support, which is placed on the curb that has already been laid, makes it possible to place it very close together.
It is designed to grip lengthways, making it suitable for use in the tightest of spaces.

• Load capacity : 100 kg
• Grip range : 500-1045 mm
• Jaw length : 100 mm
• Immersion depth : 40 mm

Particularly compact dimensions and a minimal swivel radius.

This makes it ideal for use in landscaping, civil engineering or demolition work.

New boom geometry for max. overloading height of 2,800 mm.

High stability due to hydraulically adjustable undercarriages from 1100 mm to 1,500 mm

Extra-long and -high dozer blade adaptable to track width

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and with full fuel tank !

Technical data :

• Operating weight 2400 kg
• Power 22,4 PS
• Digging depth 2455 mm
• Width 1100 mm - 1500 mm
• Height 2430 mm

Attachments incl.

• 1 x ditching bucket
• 1 x backhoe bucket

Particularly compact dimensions and a minimal swivel radius.

This makes it ideal for use in landscaping, civil engineering or demolition work.

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 2875 kg
• Power 23,9 PS
• Digging depth 2680 mm
• Width 1460 mm
• Height 2525 mm

Attachments incl.

• 1 x ditching bucket
• 1 x backhoe bucket

Particularly compact dimensions and a minimal swivel radius.

This makes it ideal for use in landscaping, civil engineering or demolition work.

Short tail design with low tail overhang.

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 2440 kg
• Power 22,4 PS
• Digging depth 2290 mm
• Width 1500 mm
• Height 2490 mm

Attachments incl.

• 1 x ditching bucket
• 1 x backhoe bucket

Particularly compact dimensions and a minimal swivel radius.

This makes it ideal for use in landscaping, civil engineering or demolition work.

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 3465 kg
• Power 24,8 PS
• Digging depth 3095 mm
• Width 1580 mm
• Height 2495 mm

Attachments incl.

• 1 x ditching bucket
• 1 x backhoe bucket

Particularly compact dimensions and a minimal swivel radius.

This makes it ideal for use in landscaping, civil engineering or demolition work.

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 4070 kg
• Power 36,3 PS
• Digging depth 3315 mm
• Width 1740 mm
• Height 2490 mm

Attachments incl.

• 1 x ditching bucket
• 1 x backhoe bucket

Particularly compact dimensions and a minimal swivel radius.

This makes it ideal for use in landscaping, civil engineering or demolition work.

• Daily rental includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data :

• Operating weight 5120 kg
• Power 39,6 PS
• Digging depth 3620 mm
• Width 1840 mm
• Height 2555 mm

Attachments incl.

• 1 x ditching bucket
• 1 x backhoe bucket

The PFT compulsory mixer (also called trough mixer) MULTIMIX is suitable for mixing various components, ready-mixed cement-based dry mortar as well as proprietary mixes, SPCC renovation mortar and PCC renovation mortar.

The mix is poured directly into the container and prepared with the prescribed amount of liquid.

Counter-rotating stirring hooks ensure a homogeneous mortar mixture in a time-saving manner.

The mix is quickly and cleanly emptied via a flat slide valve at the bottom of the container.

Technical data :

• Grain size max. 8 mm
• Filling grid: LW 45x45
• Drive motor 230 V, 1 Ph, 50 Hz, 2.3 kW, 29 rpm
• Mixing container steel
• Operation Start/Stop
• Filling height 1,210 mm
• Discharge height 640 mm
• Console height: 290 mm
• Tank volume 140 l

Lightweight tandem rollers for compaction in earthwork and asphalt construction.

Ideal for road construction and repair work as well as connection work in road construction.

Technical data :

• Operating weight 1.5 t
• Power 15.2 kW
• Width 0.85 m
• Height 2.3 m
• Driving speed max. 10 km/h
• Drum width 0.8 m
• Roller Ø 0.58 m
• Static line load 9.7 kg/cm