Sabre saw with powerful 18 Volt motor for a wide range of applications. Comfortable to handle. Thanks to variable cutting speed preselection, you can saw a wide variety of materials. The foot plate is adjustable to make full use of the saw blade.  

Scope of delivery: 

• Quick charger
• 2 x battery

Supplied consumables: 

• reciprocating saw blade S 922 BF
• Sabre saw blade S 1122 HF
• Sabre saw blade S 2345 X

Battery operated circular hand saw for all robust sawing work up to max. 57mm cutting depth.

An integrated LED ensures good visibility even in dark places.

Maximum performance due to powerful DC motor with optimized cutting speed. 

Scope of delivery:

• Quick charger
• 2 x Battery
• allen wrench

Supplied consumables:

• circular saw blade Optiline Wood

Battery operated jigsaw with powerful 18 Volt battery system. The maximum cutting depth in wood is 120 mm, in aluminium 20 mm and in metal 8 mm (depending on the saw blade). Bevel cuts from 0-45° possible, SDS saw blade change with only one hand.

Scope of delivery:

• Quick charger
• 2 battery

Supplied consumables:

• Jigsaw blades T101B wood
• Jigsaw blades T118B metal

36 volt battery-powered chainsaw with high cutting performance for use in noise-sensitive areas.

Cutting thick branches and light trunks is no problem with this tool.

• Cutting length 35 cm. 
• Battery life max. 42 min (depending on the application, the battery life may vary). 

Scope of delivery:

• 2 batteries
• Charger

Supplied consumables:

• Saw chain 
• Adhesive oil

Handy, light electric chainsaw for property maintenance and simple manual work in noise-sensitive areas.

• Cutting length 35 cm
• Power consumption 1.4 kW

Supplied consumables: 

• saw chain 
• adhesive oil

 Powerful 18 Volt SDS-plus battery-powered hammer drill with optimum power-to-weight ratio.

• Drill-Ø in concrete 4 - 26 mm
• Impact energy 2.6 J

Scope of delivery:

• Additional handle
• depth stop
• Quick charger
• 2 x Battery

Supplied consumables:

• SDS-plus drill bit set Ø 6,8,10 mm
• Flat chisel
• Pointed chisel

Powerful 125mm angle grinder for high work throughput thanks to powerful 1,300 watt motor with Constant-Electronic. User protection through KickBack Control, restart protection, torsion-proof protective hood and reduction of vibrations.

Scope of delivery: 

• Additional handle
• mounting flange
• clamping nut
• protective hood
• two-hole wrench

Supplied consumables:

• Cutting disc Ø 125 mm for metal 

Extremely handy belt grinder for removing, plane grinding, smoothing and cleaning on wood, plastic and metal.

• Sanding surface: 75mm wide

Scope of delivery:

• dust bag

Supplied consumables:

• sanding belt K40
• sanding belt K60
• sanding belt K80
• sanding belt K120

Powerful angle grinder with 230 mm disc diameter.

Optimum handling due to low weight. Vibration control main and additional handle reduces vibrations by up to 50 % for fatigue-free work.

Scope of delivery:

• Mounting flange
• clamping nut
• protective hood
• two-hole wrench
• Additional handle Vibration Control

Supplied consumables:

• Cutting disc Ø 230 mm for metal
• Diamond saw blade Ø 230 mm for concrete 

The wired plane is an all-round plane. Its powerful 710 watt motor delivers fast and accurate planing results. The planer also has an adjustable chip ejector on the left or right. In addition, the compact design offers convenient handling, making it possible to work even in places that are difficult to access. This power tool is suitable for planing wood.

• Planing knife width 82 mm
• Cutting depth up to 2.6 mm
• Fold depth adjustable up to 9 mm.

Scope of delivery:

• Allen key
• cloth dust bag
• rip fence

Supplied consumables:

• planing knife

The 850 Watt wired planer achieves an excellent surface quality. Ultrasonic knives and constant speed ensure excellent planing results and a high surface quality. In addition, the simple cutting depth adjustment enables fast and convenient working.

• Planing knife width 82 mm
• Cutting depth up to 4.0 mm
• Fold depth adjustable up to 24 mm.

Scope of delivery: 

• Dust bag
• rip fence
• rebate depth stop

Supplied consumables: 

• planing knife

Fast tile laying with additional line at 45°

Projects in addition to the two laser lines at an angle of 90° a third line at 45° for precise and fast alignment and laying of wall and floor tiles.

High accuracy of 0.2 mm/m

• Working range up to 20 m

Scope of delivery:

• aligning washer
• laser target

Supplied consumables: 

• 4 x 1.5 V-LR6 battery (AA)

Protractor for fast determination of mitre angles. Fast calculation and transfer of angles by memory function for frequently used angle dimensions Automatic calculation of single and double cross-cut and mitre angles without further aids.

• Side length 40 cm

Scope of delivery:

• Thigh extension

Supplied consumables: 

• 4 x 1.5 V-LR6 battery (AA)

Compact multi-line laser for all indoor applications. Up to four times better visibility thanks to green laser lines. High precision thanks to innovative CAL Guard monitoring and Bluetooth® connection to your smartphone for remote operation and contactless tool adjustment . High working efficiency thanks to 3 x 360° lines: horizontal and vertical levelling operations can be carried out simultaneously throughout the room with just one tool. Working area 30m. 

Scope of delivery:

• Universal bracket BM 1
• laser target
• tripod

The battery-powered shrub shears are particularly suitable for pruning and caring for small-leaved ornamental shrubs and evergreen hedges as well as for trimming lawn edges. Thanks to the powerful rechargeable battery, you enjoy full freedom of movement over a long period of time.

• Battery life up to 110min (running times are reference values and can vary depending on application)
• Shrub knife 170mm cutting length
• Grass knife 115mm cutting width. 

Scope of delivery:

• Battery 10,8 V
• charger
• shrub knife
• grass knife

For easy cleaning of smaller areas from leaves and debris.

• Battery life ca. 10 minutes
• Permanently installed battery
• Charging time approx. 2 hrs.

This model is particularly popular in noise-sensitive areas because it does not produce high noise levels.

At the same time, the device weighs only 2 kilograms and can be carried handily without any problems and thus also used spontaneously.

Scope of delivery: 

• Round nozzle
• Charger

The battery blower is extremely easy to use, weighs only 3.2 kg, has a low noise level and thanks to the powerful 36 Volt battery technology it is mobile in use. 10 N blowing power is particularly popular in noise-sensitive areas as it does not produce high noise levels and is environmentally friendly, which makes it possible to work in densely built-up residential areas at any time of day.

Scope of delivery 

• 2 rechargeable batteries 
• charger 
• round nozzle

Battery lamp with frame for best lighting conditions at any time of day.

• Max. brightness: 1900 lumen
• On/Off switch: incl. dimmer function in 2 steps
• Dimensions (L x W x H): 72 x 187 x 292 mm
• Low weight of 1.6 KG

Scope of delivery: 

• Transport case
• 2 batteries
• charger
• LBoxx 

Robust 2-speed agitator for universal requirements.

• Powerful and powerful for all material viscosities.
• Top ergonomics due to upright working position and handle shape.
• Electronic speed control
• Ideal quantity per mixture 65 litres

 Consumables supplied:

• Mixing tool MK 140 HF
• Mixing tool WK 140 HF

The powerful professional tool for the building trade.

For panel thicknesses up to 230 mm, with electronic power controller, for optimum adjustment of the cutting temperature.

Scope of delivery: 

• Transport case
• hexagonal wrench
• cleaning brush

Handy suction-pressure cleaner for quick removal of light blockages.

Short adapter for washbasins, shower and bath tubs.

Inner diameter opening approx. 60mm

Outer diameter approx. 95mm

Long adapter for toilets

Inside diameter opening approx. 70mm

Outer diameter approx. 95mm

Robust cable drum with 3-way protective contact sockets

• splash-proof
• 40m 3x2,5mm²
• 230 Volt
• H07RN-F

Extension cable

25 m 3 x 2.5mm²

230 Volt

H07RN-F

Extension cable

50 m 3 x 2.5mm²

230 Volt

H07RN-F

400 V extension cable

25 m 5 x 2,5mm² with CEE plug

H07RN-F

16 A

400 V CEE Extension cable

50 m 5 x 2,5mm²

H07RN-F

16 A

For tearing out PVC and carpet floors, unrolling and tensioning floor coverings.

For tearing out small bitumen surfaces, old tin roofs and tensioning membranes.

• Protects hands and fingers !

Vacuum suction lifter up to 120 kg 

Sturdy, robust and easy to operate orbital sander, even for hours of grinding.

Sanding plate(l/b) : 101x113mm

Scope of delivery: 

• punching tool
• Dust box incl. microfilter
• Base plate with grinding plate

Supplied consumables 

• sanding sheet for wood and paint K80
• sanding sheet for wood and colour K120 

Robust, compact, one-handed multi orbital sander for corners, edges and surfaces. The simple sanding plate change offers the user highest flexibility.

Two different sanding plates are available: Delta sanding plate 100x150mm and sanding plate 80x130mm. 

Scope of delivery: 

• Screwdriver to change the sanding plate
• Dust box
• Delta sanding plate
• grinding plate 80x130mm

Supplied consumables: 

• Sanding sheet for wood and paint K40
• Sanding sheet for wood and paint K60
• Sanding sheet for wood and paint K80
• Sanding sheet for wood and paint K120

With a net weight of 2.3 kg, the 18 volt battery hedge trimmer is your ideal tool for hedge trimming around the house or on smaller green areas. The cutting performance is strong enough to precisely trim weaker shrubs and hedges.

• Cutting length 50 cm
• Battery life up to 40 min (running times are reference values and can vary depending on application). 

Scope of delivery: 

• Charger 

Handy, oil-free 2 cylinder piston compressor with V unit.

• Suitable for continuous operation due to patented intake air cooling.
• Ideal for use on construction sites due to its small dimensions.
• Low speed with 1400 min-1, therefore very durable.
• Internal pressure gauge and precise discharge pressure regulation from 0 - 10 bar.
• Special, slow-running, oil-free unit ensures a pleasant noise level of 72 dB.
• Ideal for operation in living rooms and workshops.

 Scope of delivery: 

• Spiral hose
• Tyre filler
• Blow-out gun

Submersible pump with jacket cooling for clear and dirty water.

Pumping clean or dirty water, also with abrasive sand or sludge admixtures.

• Pump with top-mounted, vertical pressure connection R 1 ½" IT.
• Equipped with STORZ fixed coupling size C.
• Open multi-vane impeller with a free passage of 10 mm. Max.
• Temperature of the pumped medium: 35 °C, briefly up to 60 °C.

• No hose included in delivery, please rent separately if not available !

Professional, leading vibratory plate with electric motor and a plate size of 450 x 583 mm.

No exhaust / no emissions, ideal for use in indoor and poorly ventilated areas.

8 mm thick, robust base plate for optimum compression.

• Integrated, foldable chassis.
• Engine power : 2.2 KW
• Voltage : 230 Volt
• Centrifugal force : 16.0 kN
• Weight : 97 kg
• Collection best in pairs , or with suitable aids .

The comfortable precision router with digital display of the milling depth setting. Excellent tool guidance due to ergonomic handle design with different handle positions. Patented, high-precision fine adjustment in 1/10 mm increments and digital display of milling depth . Unique patented spindle lock for quick and easy cutter change. Scope of delivery: - Combination wrench 19mm - Rip fence with fine adjustment - Adapter for copy sleeve - Collet chuck with union nut 8 mm Consumables supplied: 14 pieces set of cutters, consisting of 1 piece each. Grooving cutter 8, 16, 20 mm Concave cutter 12, 21, 30 mm Quarter rod cutter 25, 33 mm Flush cutter 13 mm Burr cutter 14.3 mm Keyway cutter 14 mm Carving cutter 35 mm Folding cutter 25 mm Chamfer cutter 27 mm

Scope of delivery:

• open-end wrench 19mm
• Rip fence with fine adjustment
• Adapter for copy tubes
• Collet chuck with union nut 8 mm

Supplied consumables:

14 pieces cutter set, each consisting of 1 pc.

• Grooving end mills 8, 16, 20 mm
• Concave end mills 12, 21, 30 mm
• Quarter round end mills 25, 33 mm
• Flush end mills 13 mm
• Burr end mills 14.3 mm
• Keyway end mills 14 mm
• Carving end mills 35 mm
• Rebate end mills 25 mm
• Bevel end mills 27 mm

The ROSCOPE® pipe camera from ROTHENBERGER combines inspection and location in one device, is versatile and covers almost all inspection techniques within living and working spaces.

• The 25/16 module is ideal for inspecting pipes with a diameter of 50 to 100 mm.
• The Ø 25 mm camera head with self-aligning image is extremely flexible for 90° bends from Ø 50 mm pipes.

Operating environment:

• Temperature 0°C to 40°C
• Humidity Maximum of 95% non-condensing (display unit)
• Storage temperature -20°C to 60°C
• Water resistance Camera head and cable up to 16 m (52.5')
• Water depth Cable length 16 m

The preferred multi-detector in its class . Most objects are found and application errors avoided by automatic calibration .

Detection of even deep objects - up to 12 cm depth Even more reliable detection of objects due to three-colour LED illuminated ring.

Detectable materials :

• Ferrous metals
• Non-ferrous metals
• Wooden substructures
• live wires

Detection depth :

• Steel, max. 120 mm
• copper, max. 80 mm
• current-carrying cables, max. 50 mm
• Wooden substructures, max. 38 mm

Assembly pliers for the professional for the processing of HM cavity wall plugs.

• Also suitable as a setting tool for hollow wall plugs with hexagon head screw.

Powerful 18 Volt battery angle grinder with 125mm disc diameter and speed preselection adjustable in three steps. Optimum handling due to low weight.

Scope of delivery: 

• Transport case
• receiving flange
• clamping nut
• two-hole wrench
• Additional handle
• 2 batteries
• charger

Supplied consumables: 

• Cutting discs Ø 125 mm for metal 

The Bernina 1008 offers the flair of mechanical sewing with high precision and versatile adjustment options - a prime example of comfort and easy handling.

Scope of delivery: 

• Business carrier bag
• cover hood
• accessory box
• instruction manual
• foot controller 
• Sewing foot shaft
• Return transport sole
• overlock sole
• Buttonhole sole
• zipper sole
• Blind Stitch Sole
• Yarn spools
• needles
• arrow separator
• Oiler Brush
• bulb holder
• screwdrivers

Handy lightweight 36 volt battery-powered chainsaw for property maintenance and simple manual work in noise-sensitive areas.              Cutting length 30 cm Battery life max. 45min (depending on application battery life may vary)

Scope of delivery:

• 2 batteries 
• charger

Supplied spray material

• saw chain

Tile cutting machine for easy and clean work.

• Removable water tray - Easy cleaning and filling of water Pivoting cutting table - cuts from 0 - 45° are possible.
• Low weight (11kg) -
• Good handling and easy transport
• Max. Cutting depth at 90° 34 mm
• Max. Cutting depth at 45° 24mm

Scope of delivery :

• Transport case
• Slide disc Classic Ceramic

Rental Delivered Consumables :

• Slide disc 180mm Classic Ceramic

For drying newly built flats or after water damage.

The Profil 60 dehumidifier dries quickly and economically at the touch of a button, preventing or eliminating damp walls, musty smells and mould.

The use of a dehumidifier is recommended to avoid moisture damage and cost-intensive work interruptions.

Please note : Building dryer is not a heating appliance !

Technical data :

• Daily dehumidification capacity max. 62 l/d
• Air volume flow max. 465 m³/h
• Condensate tank capacity 10 l
• Operating temperature range 3-32 °C
• Power supply 230 V
• Power consumption max. 0.76KW

Universal tacker for professional upholstery, insulation and paneling with claws.

With long nose for precise work in hard-to-reach places.

Look-up function, impact force adjustment and clamp sight window.

The following staples and pens can be used:

• staples type 53 8-20mm
• staples type 53F 8-18mm (flat wire staples)
• pins type J 16-19mm

Supplied consumables :

• Fine wire staples type 53 11,3mm wide
• length 8 and 10mm

Light, professional, leading vibratory plate with electric motor and a plate size of 488 x 380 mm.

No exhaust / no emissions, ideal for use in indoor and poorly ventilated areas.

8 mm thick, robust base plate for optimum compression.

Retractable handle, perfect for transport and storage.

• Engine power : 1,5 KW
• Voltage : 230 V
• Centrifugal force :12,0 kN
• Weight : 50 kg

Single-disc machine for a wide range of applications.

For example, sanding and oiling wooden parquet floors, or cleaning exposed aggregate concrete slabs.

• Working width 420mm 
• Voltage 230 V 
• Input power 1800 Watt 
• Adjustable speed 57-171 rpm 

We also offer a suitable dust extraction system: Schwamborn STS 130

Bernina L460 - 4 thread overlock sewing machine

• 16 stitch patterns, - Direct threading system, - Lower gripper threading aid, - Sewing light, 2 LEDs
• Color-coded threading paths and diagram in the gripper lid
• Handwheel position indicator, - Fine adjustment Stitch length for rolled hem
• Stitch length, adjustable during sewing, - Differential feed, adjustable during sewing

With the flood box in the basement you have the water level under control with a few simple steps. The pump has a secure stand thanks to its fixation in the basket. The fire hose, which is quickly and securely attached with a C-connector, transports even large quantities of water.

Supplied accessories :

Submersible pump

12.5 m C hose

carrying basket

The GLM 120 C - the first laser range finder from Bosch with integrated camera for exact measurements up to 120 meters Easy aiming of distant targets and digital viewfinder with four zoom levels Optimally suited for outdoor applications thanks to its scratch-resistant color display Easy documentation of the measurement results by transferring the data to the Measuring Master App via Bluetooth.

Scope of delivery :

• Laser range finder
• Micro-USB cable
• USB charger
• protective bag

Washing vacuum cleaner with upholstery and floor nozzle is particularly suitable for hygienic and effective cleaning of small to medium-sized surfaces. With a spray pressure of 1 bar, the spray extraction device ensures gentle deep cleaning of textile surfaces and delivers convincing results, especially in upholstery cleaning and carpet cleaning. Thanks to the narrow floor nozzle, the device is also ideally suited for use in confined spaces. And thanks to the flexible suction lip, even heavily overhanging areas can be cleaned without difficulty.

• Max. area output (m²/h) 20 - 25
• Spray rate (l/min) 1
• Spray pressure (bar) 1
• Tank fresh / waste water (l) 10 - 9
• Turbine output (W) 1250

We recommend the use of e.g. Kärcher cleaning agent RM 760 for textile floor coverings, wall and upholstery surfaces (also mixed fabrics and fully synthetic fibres).

However, you can also use commercially available carpet and upholstery cleaners that are suitable for vacuum cleaners.

Cleaning agents are not included in the scope of delivery.

Supplied accessories :

• Spray hose with integrated water supply, 2.5 m
• Upholstery nozzle
• Narrow bottom nozzle

Ideal on the construction site, in the garden and for roofing work. Total length 800mm burner diameter 65mm.

• Burner 65mm D
• pressure reducer
• 5m hose

Electric tile cutter with water cooling.

Ideal for cutting wall and floor tiles.

• max. cutting depth at 90° 55 mm at 45° 35 mm
• mains voltage 230 V
• Weight 28kg

Supplied consumables :

• Diamond cutting disc 250x25,4mm

Ideal dust extraction for e.g. our single disc machine and diamond grinding machine.

Can be used anywhere where a normal vacuum cleaner is not sufficient.

Suitable for the construction industry with effective filter cleaning.

• Suction hose 5m
• mains voltage 230 V
• Power consumption 1.2 KW

Carpet stripper for removing old floor coverings.

• Engine power: 2200 Watt / 230 Volt
• Working width 210mm

Supplied consumables :

• Knife obstructed

For ventilating and demossing grass areas.

Ideal for medium to large lawns.

Removes moss and dead grass from your lawn.

• Power consumption 1800 Watt
• Working width 36cm
• Height adjustment 4-stage Working height -10mm to + 5mm
• Grass catcher box 40 L

Battery-powered radial press with forced discharge for making press connections Ø 10-40mm, Ø 3/8 -1¼'. 

Rotatable pressing tong holder with automatic locking. 

The automatic locking of the pressing tongs and the automatic return after completion of the pressing process (forced discharge) provide additional safety. 

With a weight of only 2.5kg and a length of only 31 cm with pressing jaw, it can be used almost anywhere.

Scope of delivery:

• Transport case
• 2 rechargeable batteries
• Charger

The pressing pliers set V contour 15,18,22,28mm for e.g. copper press fittings must be rented separately.

A panel lift for easy mounting on walls and ceilings up to mounting heights of 3.80 m.

This lift is not only strong when used on site, but also when transported to the construction site.

• The lift is foldable to a handy transport size with a weight of only 24 kg.
• The removable plate cross beam weighs only 15 kg and can therefore be transported separately.
• In just a few minutes, the panel lift with its 4 wheels can be used for panels weighing up to 70 kg.
• The plate holder is variable up to max. 1.3 x 3.8 m.
• The mechanical cable winch is equipped with an automatic brake and a non-return device.
• Ideal for the efficient assembly of plasterboard, Fermacell panels, ceiling panels etc.
• The lift can be manoeuvred conditionally by the wheels.
• This allows a fine adjustment of the panels before fixing. -
• Only one employee can carry out the complete assembly for all panel sizes available on the market -
• Both horizontal and vertical panel assembly can be adjusted -
• Automatically adjusts to roof slopes -
• Manual winch with automatic brake (non-return device) -
• 4 wheels with brake and 2 transport wheels -
• The panel lift can be dismantled into 2 parts for transport purposes. -
• It can be transported in a car or a station wagon. -
• The DWM 380 is ready for operation within half a minute.

Handy, powerful 18 volt cordless impact drill with switchable percussion mechanism.

Ideal for most applications.

• Torque adjustable in 16 steps.
• Maximum torque 45Nm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• bit set
• Multi-purpose drill set 4,5,6,8,10,12mm
• Wood twist drill set 3,4,5,6,7,8,9,10mm

Light and handy pendulum jigsaw with 3-fold pendulum stroke adjustment plus neutral position.

• Cooling air blows the interface free.
• Die-cast aluminium base plate swivels 45° on both sides.
• Electronically adjustable number of strokes.
• Tool-free saw blade change.
• With double LED.
• Cutting capacity in wood 135 mm , in steel 10 mm.

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Slide shoe plastic
• suction socket
• Saw blades for wood and metal

Powerful battery hand circular saw with a cutting depth of 57mm.

Ideal for roof work and interior finishing.

• Tilt adjustment up to 50°.
• Blowing device keeps the interface clean, with bright LED.
• Idle speed 5,000 min-1
• Cutting capacity 0° 57 mm
• Cutting capacity 45° 41 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• rip fence
• HM saw blade 24 teeth

Light and very handy planing machine, which can be used even with harder types of wood without problems.

Large V-groove for easy chamfering.

High planer shaft speed for a perfect finish.

• Planing width 82 mm
• Length of the plane sole 285 mm
• Chip removal infinitely variable 0-2.0 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• rip fence

Plate shears for simple, clean cuts.

Slim housing for excellent handling.

Double cutting edge reduces deformation of the workpiece to a minimum.

Cutting gap adjustable to different material thicknesses to reduce burr formation.

• Cutting capacity 200 N/mm² 2.5 mm
• Cutting capacity 400 N/mm² 1.6 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries

For drilling, hammer drilling and chiselling.

• With quick-change drill chuck for cylindrical drills.
• Single impact strength 2.0 Joule
• Drilling capacity in concrete 24 mm
• Drilling capacity in wood 27 mm
• Drilling capacity in steel 13 mm
• Tool holder SDS Plus

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Quick-change chuck SDS
• quick-change chuck
• handle
• depth stop
• Flat chisel , Pointed chisel
• concrete drill
• 6 100/165 mm
• 8 100/165 mm
• 10 100/165 mm

Handy battery angle drill .

Only 93 mm from the top of the gear head to the tip of the drill chuck.

With bright LED.

Electronically adjustable speed

right/left run

Drilling capacity in wood 25 mm

Drilling capacity in steel 10 mm

Drill chuck clamping width 1.5 - 10 mm

Scope of delivery :

Transport case

charger

2 batteries

drill chuck key

Very handy battery angle grinder with electronic speed control.

Grinding wheel diameter 125 mm

bore 22,23 mm

Max. Cutting depth 29 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Cutting disc 125x1mm
• Roughing disc 125x6mm

The perfect machine for finishing and renovation work with a wide range of accessories for an outstanding variety of applications.

• Mains voltage 230 V
• Nominal power consumption350 W
• Tool holder StarlockPlus
• Tool change QuickIN

 Scope of delivery :

• Transport case
• grinding plates
• sanding sheets
• suction device
• firm spatula
• E-Cut Long-Life Saw Blade (35 mm)
• Universal E-Cut saw blade (44 mm)
• E-Cut Long-Life saw blade (65 mm)
• HSS segment saw blade
• Carbide segment saw blade
• Carbide rasp (triangular shape)

Ideal for terraces (also wood) and stone slab cleaning.

The all-rounder consists of a drive unit on which nylon brush rollers for cleaning stone and wood surfaces, a joint brush and an edge cutter can be mounted.

The attachments can be changed without tools at the push of a button.

An infinitely variable speed control (450 - 1,100 rpm) in the grip area provides additional flexibility in the application.

This allows stone surfaces or joints to be powerfully cleaned of dirt.

• Battery life approx. 30 - 50 minutes
• Working width with surface brush 165mm

Scope of delivery :

• 2 batteries
• charger
• Nylon surface brush for stone
• 2 in 1 edge cutter
• Joint brush wire
• Translated with www.DeepL.com/Translator (free version)

Sheet punch is perfect for clean and burr-free punching of plastics and steel sheets.

For a good punching result, this sheet metal punch has 3 cutting tips.

Ideal e.g. for mounting a sink tap (water tap).

• Pre-drill approx. 8.5 mm for pull screw.

Handy battery nibbler for cutting sheet metal, corrugated sheet metal and trapezoidal sheet metal.

Infinitely adjustable die can be rotated 360° with 90° locking.

Slim design

Max. Cutting capacity :

• Aluminium up to 200 N/mm² 2.5 mm
• Steel up to 400 N/mm² 1,6 mm
• Steel up to 600 N/mm² 1,2 mm
• Smallest cutting radius 50 mm
• Cutting track width 5 mm
• Plunge diameter 22 mm

 Scope of delivery :

• Carrying case
• 2 rechargeable batteries
• Charger

For surface treatment of lacquer, wood, metal and natural stone.

Well-balanced machine with a 90° arrangement of handle and additional handle for optimum guidance.

Also suitable for polishing sensitive paintwork due to low speed.

With soft start and constant electronics.

With velcro disc 165 mm.

Scope of delivery :

• Sanding disc 165mm Velcro
• Polishing hood 180mm velcro

Ideal for mounting plasterboards on wood and metal constructions.

Idle speed 0-4.000 min

Scope of delivery :

• Transport case
• 2 batteries
• charger
• Bit PH 2

Ideal for sanding plasterboard and drywall fillers, or for removing wallpaper residues.

You can rent the suitable vacuum cleaner for vacuuming separately !

Scope of delivery :

• Transport case
• Long neck sander with grinding disc "super soft".
• 5 each grinding wheels 225mm K.80 and K.100

Powerful angle grinder with 230 mm disc diameter.

Optimum handling due to soft start and low weight.

Power consumption 2200 Watt

Max. Cutting depth 68mm

Ideal for steel and concrete work.

Scope of delivery :

• Diamond cutting disc for concrete work 
• steel saw blade

15m pipe cleaning hose with front bore for Kränzle high pressure cleaners.

• HD nozzle with front bore and 3 jets to the rear.
• Connection : Screw connection

The combination of plunge saw and guide bar allows exact and tear-free cuts up to 55 mm without time-consuming reworking.

Perfect cutting to length of interior doors - guide rail with plunge saw.

Creation of expansion joints in parquet floors and shadow joints (wall distance 12 mm). Cutting of board material

• Power consumption 1 200 W
• Angle range -1 - 47 °
• Cutting depth 0 - 55 mm
• Cutting depth 45° 43 mm

Scope of delivery :

• Transport case
• Immersion Saw with HM Saw Blade 48Z
• Guide rail 1,4m in pocket

Powerful handy angle grinder with a disc diameter of 125mm.

Power consumption 1100 Watt.

Mains voltage 230 Volt

Scope of delivery :

• Transport case
• Metal saw blade 125x1mm
• Flange,Clamping nut,Wrench

Ideal for the removal of concrete residues, for levelling, cleaning or light roughening of floors and walls and for the removal of old plaster and structures.

Scope of delivery :

• Transport case
• diamond cup wheel

Extremely handy belt grinder for removing, plane grinding, smoothing and cleaning on wood, plastic and metal.

• Belt length x belt width 533 x 75 mm

Scope of delivery :

• Transport case
• extraction adapter
• dust bag
• stationary device
• sanding belts

Fine-grinding orbital sander with high stock removal rate.

Anti-vibration system for fatigue-free work.

Electronically adjustable vibration/stroke rate.

Abrasive paper fastening via quick-release lever or practical Velcro fastener.

Power consumption 330 Watt

Oscillating circuit 2.6 mm

Paper size 115 x 280 mm

Paper size Velcro 115 x 232 mm

Scope of delivery :

• Transport case
• Dust bag
• Sanding sheets grit 40,60,80,120

For fast and precise creation of slots and channels in masonry.

Easy handling due to pulling cut.

Super-Joint system prevents setbacks and blockages, effectively protecting machine and user.

Technical data :

• Power consumption 1.400 Watt
• Idle speed 10,000 min-1
• Saw blade Ø / bore 125/22.33 mm

Scope of delivery :

• Transport case
• diamond discs
• face spanner
• 6-Kt L-key 6mm

Press jaw set suitable for our Rems radial press, for drinking water and heating installations.

Contour V consisting of: 

Press jaw 15,18,22 and 28mm.

Whether freely guided or on the guide rail, the OF 1010 router is the ideal one-hand tool. Thanks to its size and low weight, it can be precisely guided along edges, lines or curves with just one hand. Easy cutter change thanks to spindle stop. Simple and 1/10 mm accurate adjustment of the milling depth. More safety thanks to quick brake. MMC Electronic for material-specific work and temperature monitoring. Chip extraction integrated in the milling table.

Scope of delivery :

• Systainer
• Guide rail FS 800
• guide rail adapter
• side stop
• chip catcher
• Collet 8mm
• 14 pieces cutter set

Handy battery hedge trimmer with a cutting length of 50cm and a tooth pitch of 30mm.

Scope of delivery :

• 2 rechargeable batteries
• charger

Diamond dry core drill Ø 61mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 81mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 111mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 131mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 151mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 161mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Compact polisher for fatigue-free machining of large surfaces.

The 2.5 kg light polishing unit gives metal and painted surfaces the finishing touch.

Equipped with a powerful 1,400 watt motor, this handy machine polishes even large surfaces and runs smoothly and evenly over the painted surfaces.

• Backing pad M 14 Ø 150 mm

Scope of delivery :

• Transport bag
• Backing pad 150mm
• Foam disk hard 170mm
• Polishing sponge soft 170mm
• Lambskin hood 170mm

With the flood box in the basement you have the water level under control with a few simple steps.

The pump has a secure stand thanks to its fixation in the basket.

The fire hose, which is quickly and securely attached with a C-connector, transports even large quantities of water.

Supplied accessories :

• Submersible pump
• 12.5 m C hose
• carrying basket

Rubber / protection mat suitable for our Belle electric vibratory plate PCLX16 45E .

So that, for example, the plaster does not get scratches and scrapes when shaken off.

Tool case Proxxon

Handy universal tool case, also ideal for cars

- 14-piece combination wrench set from 6 - 19 mm

- 14 Sockets 1/2" size 8 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 and 24 mm

- Switch ratchet

- Cardan joint

- Extension 125 and 250 mm (the latter with sliding piece and 1/2" square for use as a T-handle for wheel nuts)

- Spark plug special inserts 16, 18 and 21 mm

- FLEX-DOT screwdriver set: slotted screwdriver sizes 3.0, 5.5 and 8.0 mm. Cross-recess screwdriver (PH) size 1 and 2

- Pocket wrench set, 8 pieces, for hexagon socket screws (HX 1.5 - 8.0 mm) and for TX screws (TX 9 - 40)

- Car light tester with cable and crocodile clip (for car electrical system)

- Knipex-combination pliers 180 mm

- Knipex water pump pliers 240 mm

- Engineer's hammer (300 g), ground and partially polished on all sides. With non-detachable graphite handle (glass fibre reinforced, non-slip soft component in the grip area) for unsurpassed vibration damping 

Bosch Battery Sheet Nibbler GNA 18V

The 18V nailer for flexible cuts.

• Cutting capacity steel (800 N/mm²), max.0.7 mm
• Cutting capacity steel (600 N/mm²), max.1 mm
• Cutting capacity steel (400 N/mm²), max.1,6 mm
• Cutting capacity aluminium (250 N/mm²), max.2 mm
• Minimum curve radius 40 mm

Scope of delivery :

• 2 batteries
• Charger
• Carrying case

Battery impact wrench Bosch GDS 18 V-LI HT

• High torque (650 Nm) for hard screw applications in metal (M 12 - M 20) and concrete
• Idling speed 0-1,900 rpm
• Torque, max.650 Nm
• Beat rate 0-2,100 bpm
• Battery voltage 18 V
• Tool holder 1/2" external square

Supplied accessories :

• Socket wrench inserts 77mm long SW 10 - 27 mm
• 10,11,13,17,19,21,22,24,27 mm

Powerful rechargeable percussion drill !

Technical data :

• Torque (soft/hard/max.) 47/85/- Nm
• Idle speed (1st gear / 2nd gear) 0 - 480 / 0 - 2,100 rpm
• Stroke rate, max. 31,500 min-1
• Drill chuck clamping range, min./max. 1.5 / 13 mm
• Battery voltage 18 V Torque steps 25 + 1

Drill diameter :

• drill-Ø wood, max. 82 mm
• Drill-Ø Steel, max. 13 mm
• Drill-Ø Masonry, max. 16 mm

Supplied accessories :

• 2 batteries
• Battery charger
• Bitset
• Multi-purpose drill set
• Wood drill set

Cordless tin snips Bosch GSC 18 V-16

Plate shears for flexible cuts.

Compact design: 185 mm handle circumference and perfect weight distribution for easy handling

• Cutting capacity steel (800 N/mm²), max.0,7
• Cutting capacity steel (600 N/mm²), max.1 mm
• Cutting capacity steel (400 N/mm²), max.1.6 mm
• Cutting capacity aluminium (250 N/mm²), max.2 mm
• Idling stroke rate3,400 min-1
• Battery voltage18 V
• Minimum curve radius 15 mm

Supplied accessories :

• 2 rechargeable batteries
• Battery charger

Battery - Planer Bosch GHO 18 V-LI

Fast work progress with infinitely variable cutting depth adjustment up to 1.6 mm

Ultrasonic sharp and durable HM reversible blades for a high surface quality

Compact and lightweight for comfortable working

• Idling speed 14,000 rpm
• Chip thickness 0 - 1.6 mm
• Folding depth 0 - 8 mm
• Plane width, max.82 mm
• Battery voltage 18 V

Supplied accessories :

• Charger
• 2 Batterys
• Planer knife 82 mm

Cordless angle grinder Bosch GWS 18V-SC

Small angle grinder with the same power as a wired grinder with 1,000 watts thanks to brushless EC motor.

• Idle speed 4,500 - 9,000 rpm
• Battery voltage 18 V
• Grinding spindle thread M 14
• Drill hole 22,23 mm

Supplied accessories :

• 2 batteries 5,0 Ah
• Battery charger
• Cutting discs 125 x 1 mm metal

The Bosch SDS max impact hammer for convenient handling in time-consuming applications

Vibration control and light weight allow effortless operation in continuous and time consuming applications

The powerful motor delivers 8.3 joules of impact energy for high stock removal

Technical data :

• Rated input power1.150
• Impact energy 2 - 8.3 J
• Stroke rate at nominal speed 1,300 - 2,900 bpm
• Tool holder SDS max
• Voltage, electrical230 V

Supplied accessories :

• Point Chisel
• Flat chisels
• Grease

Highest precision for clean cuts

Thanks to high-quality machine components, precision saw blade and matching guide rail system, extremely precise results are guaranteed

The efficient dust extraction system and the sound-reduced saw blade ensure comfortable working, especially indoors

Adjustable speed setting allows cuts in a wide range of materials

Technical data :

• Rated input power 1.400 W
• Idling speed 3,600 - 6,250 min-1
• Saw blade bore -Ø20 mm

Depths of cut :

• Cutting depth without guide rail (90°)57 mm
• Cutting depth without guide rail (45°)42 mm

Supplied accessories :

• FSN Bag
• Guide rail FSN 1100

Thermal imaging camera Bosch GTC 400 C

Immediate visualization of temperature differences with intelligent documentation

Fast data exchange and easy documentation of thermal images via the Bosch Measuring Master App

With picture-in-picture technology, thermal and real images are superimposed to make the localization of the measurement more clearly visible.

Technical data :

• Measuring range 10 °C to +400 °C
• Measuring accuracy IR±3.0 °C
• Resolution0.1 °C
• Thermal sensitivity (NETD)<50 mK
• Size IR sensor160x120 px
• Number of measuring points19,200
• Image memory (number of images)500
• Internal memory type memory
• File format image.jpg
• Data transmissionMicroUSB, WLAN
• Dust and splash water protectionIP 53
• Weight0,54 kg
• supported Android devices
• Smartphone from Android 4.3,
• Tablet as of Android 4.3
• supported iOS devices
• iPad (3rd gen. and above), iPad Air (1st gen. and above), iPad mini (1st gen. and above), iPhone 4S and above
• Display typeTFT LCD
• Size Display3.5".
• Operating temperature-10 - 45°C
• Storage temperature-20 - 70°C
• Target distance, minimum 0.3 m

The precise specialist for wood joints

Smooth immersion function and robust metal angle guides for precise results

A wide range of angle and depth settings ensure a wide variety of joint cutting applications

Powerful 670 watt motor for optimum milling performance for the production of frame, corner, longitudinal and cross joints

Technical data :

• cutting depth, max.22 mm
• Idling speed 9,000 rpm
• Cutter diameter bore 22 mm
• Cutter diameter 105 mm
• Rated input power 670 W
• Voltage, electrical 230 V

Scope of delivery :

• HM Disc cutter 4 mm for flat dowel connections

Handy, powerful rechargeable battery screwdriver .

The ideal helper for interior work !

Technical data :

• torque, max. (hard/soft)25 / 5 Nm
• Idle speed0 - 4,200 min-1
• Battery voltage18 V
• tool holder1/4" hexagon socket
• Screw-Ø, max.4.2 mm
• Weight approx. 1,6 kg

Supplied accessories:

• 2 rechargeable batteries
• Battery charger
• Bit PH 2

The hot air blower is suitable, for example, for removing old paint on wood, or for carefully removing stickers, etc.

Technical data :

• Rated input power 2.300 W
• Working temperature 50 - 650°C
• Air flow 150 - 500 l/min
• Stepless temperature control +
• Cold stage 50°C+
• Regulation, air flow infinitely variable

Versatile drill screwdriver

FlexiClick System: easy to change accessories for up to 8 combinations.

Technical data :

• Torque (soft/hard/max.)20/35/- Nm
• Idle speed (1st gear / 2nd gear)0 - 460 / 0 - 1,750 rpm
• Battery type : Lithium-ion
• Drill chuck clamping range, min./max.0.8 / 10 mm
• Battery voltage12 V
• Weight excl. battery 0,59 kg
• Torque steps 20+1

Drill diameter:

• drill-Ø wood, max.32 mm
• Drill-Ø Steel, max.10 mm
• Screw diameter:
• Screw-Ø, max.8 mm

Supplied accessories :

• 2 rechargeable batteries
• Battery charger
• Drill Chuck Attachment
• Bit holder attachment
• Angle attachment
• Eccentric attachment

Electric tacker Metabo Ta E 2019

For processing staples, nails, profiled wood claws and joint claws

Also suitable for processing flat wire staples

Impact force regulation for adjusting the cutting depth

Look-up facility for incompletely driven-in staples

Nose with groove for targeted tacker placement

Protection against unintentional release of the impact

Technical data :

• Max. pulse sequence 20 /min
• Length staples (4 mm wide) 12 - 18 mm
• Length staples (10 mm wide) 8 - 18 mm
• Length flat wire clamps, (10 mm wide) 8 - 14 mm
• Length nails 19 mm
• Cable length 2.55 m

Supplied accessories :

• Fine wire staples type 53/8 mm
• Fine wire clamps type 53/10 mm

Paint milling machine Metabo LF 724 S

Up to 70% time saving compared to conventional working techniques.

For environmentally friendly removal of paint and varnish from flat wooden surfaces such as stairs, doors and windows

Suitable for processing untreated wood

Suitable for rebate processing due to lateral knives

Stepless adjustment of the milling depth

Carbide reversible blades can be used on four sides for a long service life

Suction possibility through connection of an all-purpose vacuum cleaner

• Torque 2 Nm
• Flying edge circle 80 mm
• Largest fold depth unlimited
• Lateral milling height 28 mm
• Axial milling depth 0 - 0.3 mm
• Radial milling depth 0.15 mm
• Nominal power input 710 W
• Output power 430 W
• Idling speed 10000 /min
• Speed at nominal load 6700 /min
• Cable length 4 m

Supplied accessories :

• HM-Reversing blade for LF

Chop saw Metabo KGSV 72 Xact SYM

Unique, patented combination of panel saw with pulling function and precise moulding saw with symmetrically adjustable stop system

Time-saving and precise sawing of mitres without calculating and measuring by simple angle transfer from bevel to stop system

• Compact pull function for wide workpieces up to 305 mm: no space required behind the saw
• Maximum flexibility during sawing due to table rotating on both sides and saw head inclinable on both sides
• Double line laser for exact display of the cutting line left and right of the saw blade
• With saw blade "multi cut" (flat/trapezoidal tooth) for high cutting quality and long service life e.g. in laminate and aluminium profiles
• Effective chip extraction via integrated chip collection funnel
• Quick and precise adjustment of common angles via snap-in points
• Bright LED work light for illumination of the interface (mains-operated, no batteries required)

Technical data :

• Max. cutting width 90°/45° 305/ 215 mm
• Max. cutting depth 90°/45° 72/ 42 mm
• Cutting capacity 90°/90° 305 x 72 mm
• cutting capacity 45°/45° 215 x 42 mm
• Rotary disk adjustment left/right 50/50 °
• Saw blade inclination left/right 47/47 °
• Saw blade 216 mm
• Rated input power S1 100% 1500 W
• Rated input power S6 20% 1800 W
• Idling speed 2200 - 6300 /min
• cutting speed 25 - 70 m/s
• Cable length 3 m

Tape file Metabo BFE 9-20

Powerful, compact belt file for grinding, satin finishing and deburring in hard-to-reach areas.

Grinding attachment can be swivelled 270° without tools for perfect adjustment to any working position.

Tool-free abrasive belt change and adjustable belt guide.

Technical data :

• Nominal power input 950 W
• Output power 510 W
• Belt speed idle 9 - 20 m/s
• Sanding belt width 6 - 19 mm
• Sanding belt length 457 mm
• Working length of sanding belt arm 90 mm
• Cable length 4 m

Supplied accessories :

• Abrasive belts Zirkon 6x457mm K.60
• Abrasive belts Zirkon 6x457mm K.120
• Abrasive belts zircon 19x457mm K.60
• Abrasive belts Zirkon 19x457mm K.120
• Fleece tapes 6x457mm medium
• Fleece tapes 19x457 medium

Pipe belt grinder Metabo RBE 9-60 SET

Compact pipe belt grinder with high belt speeds for the productive processing of stainless steel pipes.

Large wrap angle of 190° for a surface without any build-up.

Vario-Constamatic (VC) full-shaft electronics with adjusting wheel: for working at material-specific speeds that remain almost constant under load.

Tool-free sanding belt change and adjustable belt guide.

Electronic soft start for jerk-free starting.

Technical data :

• Nominal power input 900 W
• Output power 470 W
• Belt speed idle 8 - 14 m/s
• grinding belt dimensions 30 x 533 mm
• Max. Pipe diameter 60 mm
• Wrap angle 190 °
• Cable length 4 m

Supplied accessories :

• Abrasive belts Zirkon K.80
• Abrasive belts Pyramid K.280
• Sanding belts Pyramid K.400
• Sanding belts Pyramid K.600
• Sanding belts Pyramid K.1200
• Fleece tapes medium

scrubber drier Kärcher BD 30/4 C BP Pack

Flexible in use, ultra-compact in shape, only 20 kg in weight: the battery-powered scrubber-dryer BD 30/4 C Bp Pack for fast cleaning of surfaces up to 300 m².

• 
  
• Working width brushes (mm)280
• Working width suction (mm)325
• Power input (W)max. 240
• Battery (V/Ah)36.5 / 5.2
• Battery capacity (Ah)5.2
• Battery voltage (V)36.5
• Tank fresh / waste water (l)4 / 4
• Brush contact pressure (g/cm²/kg)20 / 10
• Brush speed (rpm)150
• Max. area output (m²/h)900
• Practical area output (m²/h)600

Equipment:

• Disc brush
• 2-tank system
• Battery
• Battery charger
• Transport wheels
• Suction beam, bent

Moisture meter Gann Hydromette Compact B

The Compact B is an electronic building moisture indicator with non-destructive measuring method according to the dielectric constant/high frequency measuring principle.

With LCD display and flexibly applicable ball probe for detecting moisture in building materials of all kinds and for detecting the distribution of moisture in walls, ceilings and screeds and other set building materials.

Especially suitable for parquet and tile layers .

Handy quick moisture indicator in pocket size for lightning fast single or series measurements

Power supply:

• 9 V block battery

Building moisture:

• 0 - 100 digits Scan range

Pipe cleaning hose Kränzle 10 Meters

Technical data :

• max. 10 l/min
• max. 160 bar (16 MPa)
• max. 40 °C
• Nozzle system 03

Very handy, light machine with optimum operating comfort. Enables fatigue-free and ergonomic working.

Technical data :

Power consumption 500 watts

Power output 270 Watt

Idling speed 1100-1650 /min

grinding wheel Ø 225 mm

Clip tool holder

Angle of inclination at the head 100 °

length 1520 mm

Cable length 5,0 m

Weight 3,9 kg

Scope of delivery :

Sanding sheets K.80

Sanding sheets K.100

Extremely compact single ladder, stepladder and stepladder. With the Telestep ladder, stable adaptation to uneven floors or stairs is also possible.

Simple, easy operation.

Little space required for storage and transport.

Length of single ladder : 2,35 - 4,00 m

vertical height / stepladder : 1,15 - 1,90 m

spar : approx.60mm

Fresh concrete in walls and formwork can be effectively compacted with a submersible vibrator. 

The vibrator bottle allows the trapped air bubbles to rise and escape through vibration. 

This compacts the concrete sustainably. 

Careful compaction increases the quality of the erected concrete part.

Technical data :

• Bottle diameter : 40 mm
• Bottle length : 330 mm
• Rated power : 650 W
• Supply voltage : 230 V

The GYSMI 160 P is an innovative, microprocessor-controlled electric hand welder with high arc dynamics for successful welding work.

Suitable for the demands of experienced do-it-yourselfers.

Practical and light (4.2kg).

Low power consumption 16A-230V

Insensitive to current and arc fluctuations.

Protected against mains surges up to 400 volts, suitable for generators 6kW (7.5kVA)

Increased open-circuit voltage of 72V for good ignition behaviour

Regulates the arc, the arc length is kept almost constant. 

Accessories supplied :

• Electrodes 1.6 2.0 and 2.5mm
• Carrying bag

The battery-powered blowing device is extremely easy to operate, weighs 3.2 kg, is quiet and mobile thanks to powerful 36 V battery technology. 10 N blowing power is particularly popular in noise-sensitive areas, as it does not produce high noise levels and is environmentally friendly, which makes it possible to work in densely built-up residential areas at any time of day.

Scope of delivery: 

• 2 rechargeable batteries 
• Battery charger 
• Round nozzle

Laminate Punch Straticut

Professional laminate cutter for cutting laminate panels with only 2 handles.

• For material thicknesses from 6 to 10mm especially for cutting laminate and MDF.
• Dust-free and without necessary electrical connection.
• max. cutting width: 210mm
• incl. compensation block

Edge grinding machine Nova

• Light and powerful parquet edge sanding machine
• Light and agile
• High grinding and working speed
• Efficient dust extraction
• Easily exchangeable grinding attachment

Technical data :

• Voltage : 230 V / 50 Hz
• Power consumption: 1150 W
• Weight: 7,9 kg
• Speed: 3,200 min1
• grinding disc: Ø 150 mm
• grinding attachment: 130mm 

Grinding attachment

Long grinding attachment for edge grinding machine Nova

Easily exchangeable grinding attachment for use of the Nova edge grinding machine under radiators.

• length 330mm

With its high number of revolutions, the suction floor polisher machine ensures perfect polishing results on hard floors such as parquet, laminate, stone, cork, linoleum or PVC. The suction function simply sucks off the polishing dust. Thanks to the optimised triangular shape of the polishing head, corners can also be reached easily.

Technical data :

• Speed (rpm)1000
• Input power (W)600
• Working width (mm)290
• Filter bag volume (l)4
• Current type (V/Hz)220 - 240 / 50 - 60

The XP ORX 22 WSA impresses with its simple operation, good search performance and its low weight of only 770 grams. Dar Detector is a completely wireless detector with radio connection to the search coil and headphones.

Performance data:

• 4 factory programs: 2x gold search, coins and relics and 2 storable user programs
• Fast and secure radio connection, latest technology: coil - remote control - headphones - pinpointer MI-6.
• Conductance display with iron probability indicator
• 99 sensitivity levels
• 99 levels of discrimination + 5 levels of discrimination in the IAR gold search programs
• 20 levels for the background tone (Threshold)
• 4 selectable reaction times
• Iron sound with audio pitch (can be switched on/off)
• Soil levelling Automatic (Fast levelling - Fast Grab) and manual from 60 - 90
• Saltwater fashion for beach with ground suppression 00-25
• Pinpoint function with target zoom
• Display illumination
• WSA radio headphone system with volume control (depending on variant)
• S-telescopic linkage LITE
• Weight only 770 grams (remote control worn on belt)
• Lithium polymer batteries without memory effect (recharge via USB)
• Battery capacities per charge coil, 20 - 28 hours, remote control 19 hours, WSA radio headphones 15 hours
• Software update possible (on remote control via USB cable)
• Go Terrain App compatible

Scope of delivery:

•  Remote control
• 22,5cm double-D HF search coil, 6m waterproof
• Coil protection
• Screw set for HF coils
• S-telescopic linkage LITE
• Lithium polymer batteries
• USB charging cable

Universally applicable for all design elements found in gardening and landscaping due to large adjustable opening range.

Technical data :

• Gripping range W (mm): 0-550
• Immersion depth E (mm): 210
• Jaw length L (mm): 200
• Load capacity (kg): 200
• Dead weight (kg): 12

Christmas tree stand for max. 3.0 m tree height with foot lever function and single-rope technique.

• Trunk diameter 3-13 cm
• Water tank max. 3, 0 litres
• Weight 5, 0 kg
• Diameter 37 cm
• Mechanical water level indicator