Submit

Overview Search results

No reults
{{ ((((tool.productPricing.minPrice)/100).toFixed(2)).toString()).replace('.',',' ) }}-{{ (((tool.productPricing.maxPrice)/100).toFixed(2).toString()).replace('.',',') }} €/hr

Wish tool not there?
Then just write us!

If you want tools for the Toolstation near you that we don't have at hand yet: write us! By the way, we adapt the range of tools seasonally.

Overview Woodworking Tools

1,23-3,60 €/hr
Makita Battery planer DKP 180 RTJ

Makita Battery planer DKP 180 RTJ

Light and very handy planing machine, which can be used even with harder types of wood without problems.Large V-groove ...

Light and very handy planing machine, which can be used even with harder types of wood without problems.

Large V-groove for easy chamfering.

High planer shaft speed for a perfect finish.

  • Planing width 82 mm
  • Length of the plane sole 285 mm
  • Chip removal infinitely variable 0-2.0 mm

Scope of delivery :

  • Transport case
  • charger
  • 2 batteries
  • rip fence
> More
In other station
1,04-3,80 €/hr
Bosch Cordless Sabre Saw GSA 18V-32 Kit

Bosch Cordless Sabre Saw GSA 18V-32 Kit

Sabre saw with powerful 18 Volt motor for a wide range of applications. Comfortable to handle. Thanks to variable cutti...

Sabre saw with powerful 18 Volt motor for a wide range of applications. Comfortable to handle. Thanks to variable cutting speed preselection, you can saw a wide variety of materials. The foot plate is adjustable to make full use of the saw blade.  

Scope of delivery: 

  • Quick charger
  • 2 x battery


Supplied consumables: 

  • reciprocating saw blade S 922 BF
  • Sabre saw blade S 1122 HF
  • Sabre saw blade S 2345 X
> More
In other station
0,72-2,10 €/hr
Bosch Angle Grinder GWS 13-125 CIE

Bosch Angle Grinder GWS 13-125 CIE

Powerful 125mm angle grinder for high work throughput thanks to powerful 1,300 watt motor with Constant-Electronic. Use...

Powerful 125mm angle grinder for high work throughput thanks to powerful 1,300 watt motor with Constant-Electronic. User protection through KickBack Control, restart protection, torsion-proof protective hood and reduction of vibrations.

Scope of delivery: 

  • Additional handle
  • mounting flange
  • clamping nut
  • protective hood
  • two-hole wrench

Supplied consumables:

  • Cutting disc Ø 125 mm for metal 
> More
In other station
0,96-2,80 €/hr
Bosch Belt Sander GBS 75 AE

Bosch Belt Sander GBS 75 AE

Extremely handy belt grinder for removing, plane grinding, smoothing and cleaning on wood, plastic and metal. Sanding s...

Extremely handy belt grinder for removing, plane grinding, smoothing and cleaning on wood, plastic and metal.

  • Sanding surface: 75mm wide

Scope of delivery:

  • dust bag
  • graphite plate
  • fabric abrasive belt

Supplied consumables:

  • sanding belt for wood and paint K40
  • sanding belt for wood and colour K60
  • sanding belt for wood and colour K80
  • sanding belt for wood and colour K120
> More
In other station
0,48-1,40 €/hr
KSF Switzerland plate lift Plattenlift DWM 380

KSF Switzerland plate lift Plattenlift DWM 380

A panel lift for easy mounting on walls and ceilings up to mounting heights of 3.80 m.This lift is not only strong when...

A panel lift for easy mounting on walls and ceilings up to mounting heights of 3.80 m.

This lift is not only strong when used on site, but also when transported to the construction site.

  • The lift is foldable to a handy transport size with a weight of only 24 kg.
  • The removable plate cross beam weighs only 15 kg and can therefore be transported separately.
  • In just a few minutes, the panel lift with its 4 wheels can be used for panels weighing up to 70 kg.
  • The plate holder is variable up to max. 1.3 x 3.8 m.
  • The mechanical cable winch is equipped with an automatic brake and a non-return device.
  • Ideal for the efficient assembly of plasterboard, Fermacell panels, ceiling panels etc.
  • The lift can be manoeuvred conditionally by the wheels.
  • This allows a fine adjustment of the panels before fixing. -
  • Only one employee can carry out the complete assembly for all panel sizes available on the market -
  • Both horizontal and vertical panel assembly can be adjusted -
  • Automatically adjusts to roof slopes -
  • Manual winch with automatic brake (non-return device) -
  • 4 wheels with brake and 2 transport wheels -
  • The panel lift can be dismantled into 2 parts for transport purposes. -
  • It can be transported in a car or a station wagon. -
  • The DWM 380 is ready for operation within half a minute.
> More
In other station
0,69-2,00 €/hr
Bosch Plunge saw GKT 55 GCE

Bosch Plunge saw GKT 55 GCE

Highest precision for clean cutsThanks to high-quality machine components, precision saw blade and matching guide rail ...

Highest precision for clean cuts

Thanks to high-quality machine components, precision saw blade and matching guide rail system, extremely precise results are guaranteed

The efficient dust extraction system and the sound-reduced saw blade ensure comfortable working, especially indoors

Adjustable speed setting allows cuts in a wide range of materials

Technical data :

  • Rated input power 1.400 W
  • Idling speed 3,600 - 6,250 min-1
  • Saw blade bore -Ø20 mm

Depths of cut :

  • Cutting depth without guide rail (90°)57 mm
  • Cutting depth without guide rail (45°)42 mm

Supplied accessories :

  • FSN Bag
  • Guide rail FSN 1100
> More
In other station
1,71-5,00 €/hr
Roll Edge grinding machine Nova

Roll Edge grinding machine Nova

Edge grinding machine NovaLight and powerful parquet edge sanding machineLight and agileHigh grinding and working speed...

Edge grinding machine Nova

  • Light and powerful parquet edge sanding machine
  • Light and agile
  • High grinding and working speed
  • Efficient dust extraction
  • Easily exchangeable grinding attachment

Technical data :

  • Voltage : 230 V / 50 Hz
  • Power consumption: 1150 W
  • Weight: 7,9 kg
  • Speed: 3,200 min1
  • grinding disc: Ø 150 mm
  • grinding attachment: 130mm 
> More
In other station
0,10-0,28 €/hr
Star-Max Christmas tree stand S 300

Star-Max Christmas tree stand S 300

Christmas tree stand for max. 3.0 m tree height with foot lever function and single-rope technique.Trunk diameter 3-13 ...

Christmas tree stand for max. 3.0 m tree height with foot lever function and single-rope technique.

  • Trunk diameter 3-13 cm
  • Water tank max. 3, 0 litres
  • Weight 5, 0 kg
  • Diameter 37 cm
  • Mechanical water level indicator
> More
In other station
0,14-0,40 €/hr
Proxxon Router attachment OFV

Proxxon Router attachment OFV

Router attachment suitable for drill grinder IBS/EFor MICROMOT devices with 20 mm system fit.For grooving, milling groo...

Router attachment suitable for drill grinder IBS/E


For MICROMOT devices with 20 mm system fit.

For grooving, milling grooves, milling edges.

Supplied accessories :

HSS cutter set for soft wood

> More
In other station
0,24-0,70 €/hr
Proxxon Toolbox Universalwerkzeugkoffer 43.teilig

Proxxon Toolbox Universalwerkzeugkoffer 43.teilig

Tool case ProxxonHandy universal tool case, also ideal for cars- 14-piece combination wrench set from 6 - 19 mm- 14 Soc...

Tool case Proxxon


Handy universal tool case, also ideal for cars


- 14-piece combination wrench set from 6 - 19 mm

- 14 Sockets 1/2" size 8 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 and 24 mm

- Switch ratchet

- Cardan joint

- Extension 125 and 250 mm (the latter with sliding piece and 1/2" square for use as a T-handle for wheel nuts)

- Spark plug special inserts 16, 18 and 21 mm

- FLEX-DOT screwdriver set: slotted screwdriver sizes 3.0, 5.5 and 8.0 mm. Cross-recess screwdriver (PH) size 1 and 2

- Pocket wrench set, 8 pieces, for hexagon socket screws (HX 1.5 - 8.0 mm) and for TX screws (TX 9 - 40)

- Car light tester with cable and crocodile clip (for car electrical system)

- Knipex-combination pliers 180 mm

- Knipex water pump pliers 240 mm

- Engineer's hammer (300 g), ground and partially polished on all sides. With non-detachable graphite handle (glass fibre reinforced, non-slip soft component in the grip area) for unsurpassed vibration damping 

> More
In other station
0,33-0,95 €/hr
Proxxon Micro - profiler MP 400

Proxxon Micro - profiler MP 400

Micro - profiling unit MP 400For exact processing of edges and longitudinal cuts in wood, fibreboards and suitable type...

Micro - profiling unit MP 400


For exact processing of edges and longitudinal cuts in wood, fibreboards and suitable types of plastic.

For touching, making grooves, heels, radii and other profiles.


Technical data :

Power supply: 220 V - 240 V, 50/60 Hz.

Power: 100 W.

25.000 rpm.

Milling table 300 x 150 mm

Weight: approx. 2 kg


Supplied accessories :


HSS grooving cutter 3,2 mm

HSS V- Slotting cutter 6,5 mm

HSS quarter round cutter R : 3,2 mm

> More
In other station
0,33-0,95 €/hr
Proxxon Block belt grinder BBS/S

Proxxon Block belt grinder BBS/S

Block belt sanderCompact, lightweight device.Left-aligned sanding belt: This allows surfaces to be processed right into...

Block belt sander


Compact, lightweight device.

Left-aligned sanding belt: This allows surfaces to be processed right into the corners.

One roller - fine adjustment prevents lateral rolling.

Easy changing of the belts without tools due to spring tension.

220 - 240 V. 

150 W. 

Sanding belt 40 x 265 mm. 

Sanding surface 60 x 40 mm. 

Belt speed 160 m/min. 

Length 175 mm. Weight 700 g. 

Insulated according to class 2.


Supplied accessories :

Abrasive belts K 80 , K 150 , K 240

> More
In other station
0,33-0,95 €/hr
Proxxon Table drill TBH

Proxxon Table drill TBH

For precision engineering, laboratory and workshop.Practical height adjustment via gear rack with smooth-running crank....

For precision engineering, laboratory and workshop.

Practical height adjustment via gear rack with smooth-running crank.

Technical data :

220 - 240 Volt

Spindle speeds: 1,080 - 2,400 and 4,500/min

quill stroke 63 mm

height adjustment via crank 70 mm

Drilling capacity in steel 10 mm 

Throat 140 mm

Usable table area 200 x 200 mm

column 45 x 500 mm

Tool holding up to 10 mm by means of a gear rim drill chuck 

Weight approx. 10 kg

Supplied accessories :

Machine vice Primus 100

Fastening set for vice

> More
In other station
0,33-0,95 €/hr
Proxxon Surface planer AH 80

Proxxon Surface planer AH 80

Surface PlaneSupporting structure made of die-cast aluminium parts with CNC machined fits.The prerequisite for vibratio...

Surface Plane


Supporting structure made of die-cast aluminium parts with CNC machined fits.

The prerequisite for vibration-free, clean planing of soft and hard woods.

Planer shaft with ball bearings and replaceable HSS blades.


Technical data :


table 400 x 80 mm

Plane width 80 mm. 

Maximum chip removal (infeed depth) 0.8 mm. 

Knife speed 6.000/min


Supplied accessories :

Spare reversible planer blade 82 mm

> More
In other station
0,31-0,90 €/hr
Proxxon Jigsaw STS/E

Proxxon Jigsaw STS/E

Jigsaw STS 12/EIdeal for curved cuts in wood (up to 10 mm), blanks (up to 3 mm) and non-ferrous metal (up to 2.5 mm)Pow...

Jigsaw STS 12/E


Ideal for curved cuts in wood (up to 10 mm), blanks (up to 3 mm) and non-ferrous metal (up to 2.5 mm)

Powerful DC - special motor.

Stepless stroke rate control with feedback effect.

Additional ball adapter for machining convex and concave surfaces.


Supplied accessories :

Saw blades, coarse and fine

> More
In other station
2,06-6,00 €/hr
Schwamborn single disc STR 581

Schwamborn single disc STR 581

For sanding wooden floorboards or parquet with 4-head sanding disc.Optionally we offer as a separate rental item a driv...

For sanding wooden floorboards or parquet with 4-head sanding disc.

Optionally we offer as a separate rental item a driving plate to apply e.g. oil or wax or a scrubbing brush Perlon/wire to clean e.g. terraces or paving slabs.

  • working width 420mm 
  • voltage 230 V 
  • Input power 1800 Watt 
  • Adjustable speed 57-171 rpm 

We also offer a suitable dust extraction system !

Supplied consumable material :

  • 4-head plate 
  • grinding wheels 150mm K. 40 , 60 , 80 , 120
  • Suction ring


> More
In other station
0,93-2,70 €/hr
Bosch Wood router GOF 1250 LCE

Bosch Wood router GOF 1250 LCE

The comfortable precision router with digital display of the milling depth setting. Excellent tool guidance due to ergo...

The comfortable precision router with digital display of the milling depth setting. Excellent tool guidance due to ergonomic handle design with different handle positions. Patented, high-precision fine adjustment in 1/10 mm increments and digital display of milling depth . Unique patented spindle lock for quick and easy cutter change. Scope of delivery: - Combination wrench 19mm - Rip fence with fine adjustment - Adapter for copy sleeve - Collet chuck with union nut 8 mm Consumables supplied: 14 pieces set of cutters, consisting of 1 piece each. Grooving cutter 8, 16, 20 mm Concave cutter 12, 21, 30 mm Quarter rod cutter 25, 33 mm Flush cutter 13 mm Burr cutter 14.3 mm Keyway cutter 14 mm Carving cutter 35 mm Folding cutter 25 mm Chamfer cutter 27 mm

Scope of delivery:

  • open-end wrench 19mm
  • Rip fence with fine adjustment
  • Adapter for copy tubes
  • Collet chuck with union nut 8 mm

Supplied consumables:

14 pieces cutter set, each consisting of 1 pc.

  • Grooving end mills 8, 16, 20 mm
  • Concave end mills 12, 21, 30 mm
  • Quarter round end mills 25, 33 mm
  • Flush end mills 13 mm
  • Burr end mills 14.3 mm
  • Keyway end mills 14 mm
  • Carving end mills 35 mm
  • Rebate end mills 25 mm
  • Bevel end mills 27 mm
> More
In other station
0,72-2,10 €/hr
Bosch Swinging Grinder GSS 140-1 A

Bosch Swinging Grinder GSS 140-1 A

Sturdy, robust and easy to operate orbital sander, even for hours of grinding. Sanding plate(l/b) : 101x113mmScope of d...

Sturdy, robust and easy to operate orbital sander, even for hours of grinding.

Sanding plate(l/b) : 101x113mm

Scope of delivery: 

  • punching tool
  • Dust box incl. microfilter
  • Base plate with grinding plate

Supplied consumables 

  • sanding sheet for wood and paint K80
  • sanding sheet for wood and colour K120 
> More
In other station
0,72-2,10 €/hr
Bosch Random Orbit Sander GEX 125-150 AVE

Bosch Random Orbit Sander GEX 125-150 AVE

Powerful low-vibration random orbit sander for comfortable working. The eccentric movement plus rotation ensures the fi...

Powerful low-vibration random orbit sander for comfortable working. The eccentric movement plus rotation ensures the finest sanding with high sanding performance. Flexibility for every application thanks to the choice of 150 mm or 125 mm grinding disc diameter.

Scope of delivery:

  • Hexagon socket wrench
  • additional handle
  • Grinding disc Ø 125 mm
  • grinding disc Ø 150 mm 

Supplied consumables:

  • Sanding belt for wood and paint K40
  • Sanding belt for wood and paint K60
  • Sanding belt for wood and paint K80
  • Sanding belt for wood and paint K120
> More
In other station
1,20-3,50 €/hr
Bosch Cordless Jigsaw GST 18V-LI B

Bosch Cordless Jigsaw GST 18V-LI B

Battery operated jigsaw with powerful 18 Volt battery system. The maximum cutting depth in wood is 120 mm, in aluminium...

Battery operated jigsaw with powerful 18 Volt battery system. The maximum cutting depth in wood is 120 mm, in aluminium 20 mm and in metal 8 mm (depending on the saw blade). Bevel cuts from 0-45° possible, SDS saw blade change with only one hand.

Scope of delivery:

  • Quick charger
  • 2 battery

Supplied consumables:

  • Jigsaw blades T101B wood
  • Jigsaw blades T118B metal


> More
In other station
1,06-3,10 €/hr
Kärcher Wet/dry vacuum cleaner NT 30/1 Tact L

Kärcher Wet/dry vacuum cleaner NT 30/1 Tact L

Kärcher wet/dry vacuum cleaner NT 30/1 Tact LFor effective and quick cleaning of machines, vehicles, workshops and con...

Kärcher wet/dry vacuum cleaner NT 30/1 Tact L

For effective and quick cleaning of machines, vehicles, workshops and construction sites.

Thanks to the automatic filter cleaning system Tact and the moisture-resistant PES flat-fold filter, the compact all-purpose vacuum cleaner convinces in the dust-free removal of large quantities of fine dust over long working intervals.

  • Filter bags are not included as the vacuum cleaner has an automatic filter cleaning system (Tact).

Technical data :

  • Air flow rate (l/s)74
  • Vacuum (mbar/kPa)254 / 25.4
  • Tank capacity (l)30Max.
  • input power(W)1380
  • Standard nominal diameter35
  • Sound pressure level (dB(A))69
  • Container materialPlastic
  • Number of current phases (Ph)1
  • Frequency (Hz)50 - 60
  • Voltage (V)220 - 240
  • Weight (kg)13,5
  • Dimensions (L × W × H) (mm)560 x 370 x 580

Scope of delivery :

  • suction hose with elbow (2,5 m)
  • wet/dry floor nozzle, 360 mm
  • crevice nozzle
  • 2 suction pipe, stainless steel 0.55 m
  • flat-fold filter, PES
> More
In other station
1,54-4,50 €/hr
Bosch Multi-Cutter GOP 55-36

Bosch Multi-Cutter GOP 55-36

High-performance multifunctional tool. Suitable for the toughest applications thanks to powerful 550 watt high-performa...

High-performance multifunctional tool.

Suitable for the toughest applications thanks to powerful 550 watt high-performance motor.

This power tool is suitable, for example, for removing windows, renovating expansion joints and cutting grooves in wooden frame constructions.

It can be used for wood, plastic and metal.

Practical snap-in function allows accessories to be changed in just 3 seconds without tools.

It is compatible with the Starlock, StarlockPlus and StarlockMax systems.

Supplied accessories :

  • Transport case
  • grinding plate
  • sanding sheets
  • extraction adapter
  • HM 3 corner rasp
  • HM segment saw blade
  • Wood/metal segment saw blade
  • plunge saw blade wood/metal 32mm
  • plunge saw blade wood/metal 52mm
> More
In other station
0,21-0,60 €/hr
Gann Moisture meter/wood Hydromette Compact S

Gann Moisture meter/wood Hydromette Compact S

Moisture meter Gann Hydromette Compact SThe Compact S is an electronic wood moisture meter for wood fuels with mean val...

Moisture meter Gann Hydromette Compact S


  • The Compact S is an electronic wood moisture meter for wood fuels with mean value calibration for soft and hard wood and a large 3-digit LCD display.
  • The measuring tips attached to the top of the instrument allow moisture measurements in wood up to 30 mm thick.

for environmental protection due to lower emissions

to protect the stove and fireplace by improving combustion

for saving through a higher energy yield, because the wood is burned in the optimal moisture condition


Handy quick moisture meter in pocket size for single or series measurements

separate electrodes or cables required


Power supply:

  • 9 V block battery
> More
In other station
1,00-4,00 €/hr
Roll Laminate cutter Laminatstanze Straticut

Roll Laminate cutter Laminatstanze Straticut

Laminate Punch StraticutProfessional laminate cutter for cutting laminate panels with only 2 handles.For material thick...

Laminate Punch Straticut

Professional laminate cutter for cutting laminate panels with only 2 handles.

  • For material thicknesses from 6 to 10mm especially for cutting laminate and MDF.
  • Dust-free and without necessary electrical connection.
  • max. cutting width: 210mm
  • incl. compensation block
> More
In other station
0,86-2,50 €/hr
Bosch Battery impact drill GSB 18V-85C

Bosch Battery impact drill GSB 18V-85C

Powerful rechargeable percussion drill !Technical data :Torque (soft/hard/max.) 47/85/- NmIdle speed (1st gear / 2nd ge...

Powerful rechargeable percussion drill !

Technical data :

  • Torque (soft/hard/max.) 47/85/- Nm
  • Idle speed (1st gear / 2nd gear) 0 - 480 / 0 - 2,100 rpm
  • Stroke rate, max. 31,500 min-1
  • Drill chuck clamping range, min./max. 1.5 / 13 mm
  • Battery voltage 18 V Torque steps 25 + 1

Drill diameter :

  • drill-Ø wood, max. 82 mm
  • Drill-Ø Steel, max. 13 mm
  • Drill-Ø Masonry, max. 16 mm

Supplied accessories :

  • 2 batteries
  • Battery charger
  • Bitset
  • Multi-purpose drill set
  • Wood drill set
> More
In other station
0,33-0,95 €/hr
Proxxon Micro - Band Saw MBS 240/E

Proxxon Micro - Band Saw MBS 240/E

Micro - Band saw MBS 240/EFor a perfect cut in steel, non-ferrous metal, wood and plastic.With 3-fold ball bearing moun...

Micro - Band saw MBS 240/E

For a perfect cut in steel, non-ferrous metal, wood and plastic.

With 3-fold ball bearing mounted band guide.

Slot for mitre stop

With adjustment facility for band saw blades of different widths.

Technical data: 

220 - 240 V. 

Band speed adjustable from 180 - 330 m/min 

Projection 150 mm. 

Maximum height passage 80 mm. 

Work table 200 x 200 mm (can be swivelled from 0° - 45°).

Supplied accessories :

Band saw blade fine, steel and brass

Band saw blade wood

Band saw blade narrow, wood and NE metal

> More
In other station
0,33-0,95 €/hr
Proxxon Chop and mitre saw KGS 80

Proxxon Chop and mitre saw KGS 80

Cross-cut and mitre sawFor clean and safe cutting to length of workpieces made of non-ferrous metal, plastic and wood.A...

Cross-cut and mitre saw


For clean and safe cutting to length of workpieces made of non-ferrous metal, plastic and wood.

Advantageous for mitre cuts: Not the saw head, but the rotary table (with clamped workpiece) is adjusted !

Technical data :

220 - 240 V. 

200 W. 50/60 Hz. 

6.000/min. 

Table 230 x 230 mm. 

Weight 6 kg. 

Cutting capacity at 90 degrees:

thickness x width

10 x 65 mm

18 x 50 mm

21 x 40 mm

25 x 25 mm

Supplied accessories :

HM Saw blade 80mm

> More
In other station
1,23-3,60 €/hr
Bosch Battery planer GHO 18V-LI

Bosch Battery planer GHO 18V-LI

Battery - Planer Bosch GHO 18 V-LIFast work progress with infinitely variable cutting depth adjustment up to 1.6 mmUltr...

Battery - Planer Bosch GHO 18 V-LI

Fast work progress with infinitely variable cutting depth adjustment up to 1.6 mm

Ultrasonic sharp and durable HM reversible blades for a high surface quality

Compact and lightweight for comfortable working

  • Idling speed 14,000 rpm
  • Chip thickness 0 - 1.6 mm
  • Folding depth 0 - 8 mm
  • Plane width, max.82 mm
  • Battery voltage 18 V

Supplied accessories :

  • Charger
  • 2 Batterys
  • Planer knife 82 mm
> More
In other station
0,38-1,10 €/hr
Proxxon Scroll saw DSH

Proxxon Scroll saw DSH

2-speed scroll sawcutting capacity in wood 50 mm, plastic 30 mm, non-ferrous metals 10 mmFor cutting Plexiglas, GFK, fo...

2-speed scroll saw


cutting capacity in wood 50 mm, plastic 30 mm, non-ferrous metals 10 mm

For cutting Plexiglas, GFK, foam, rubber, leather and cork.saw arms made of die-cast aluminium, slim, for free view from above.bellows with adjustable air nozzle.stable table made of die-cast aluminium, tiltable by 45° for mitre cuts.

220 - 240 V.

Powerful, brushless 2-speed motor (205 W)

Stroke rate 900 or 1,400/min.

Saw stroke 19 mm

Projection 400 mm

Maximum cutting depth 50 mm, with 45° mitre 25 mm

Weight approx. 20 kg


Supplied accessories:


Saw blades coarse toothed

Saw blades normal toothed

Saw blades fine toothed ( NE metal )

> More
In other station
0,31-0,90 €/hr
Proxxon Drill grinder Bohrschleifer IBS/E

Proxxon Drill grinder Bohrschleifer IBS/E

For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing.High true running accuracyTechnica...

For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing.


High true running accuracy


Technical data:


5.000 - 20.000 per minute


Power consumption maximum 100 W.


Voltage 220 - 240 V.


Sturdy gear head made of die-cast aluminium.


Main housing: glass fibre reinforced POLYAMIDE.


Length 230 mm


Weight 500 g


Protective insulation according to class 2


With 20 mm MICROMOT system fitting at the front for use in drilling and horizontal stands.




Supplied accessories :


6 steel collets from 1,0 - 3,2 mm


different tools


Flexible shaft


> More
In other station
0,31-0,90 €/hr
Proxxon Belt sander BS/E

Proxxon Belt sander BS/E

Belt grinder BS/ECompact, high-torque, robust and versatile.For grinding out small openings, regrinding of shapes, surf...

Belt grinder BS/E


Compact, high-torque, robust and versatile.

For grinding out small openings, regrinding of shapes, surfaces, radii, grinding of grooves, deburring and gripping of precision parts.

Stepless speed control

Grinding arm can be swivelled by up to 60°.

220 - 240 V.

100 W. 

Sanding belt 10 x 330 mm (available sanding surface 10 x 110mm). 

Length 350 mm. 

Weight 650 g. 

Insulated according to class 2.

Supplied accessories :

Sanding belts K 80

Sanding belts K 180

> More
In other station
1,10-3,20 €/hr
Schwamborn dustextraction STS 130

Schwamborn dustextraction STS 130

Ideal dust extraction for e.g. our single disc machine and diamond grinding machine. Can be used anywhere where a norma...

Ideal dust extraction for e.g. our single disc machine and diamond grinding machine.

Can be used anywhere where a normal vacuum cleaner is not sufficient.

Suitable for the construction industry with effective filter cleaning.

  • Suction hose 5m
  • mains voltage 230 V
  • Power consumption 1.2 KW
> More
In other station
0,82-2,40 €/hr
Bosch Portable Planer GHO 26-82 D

Bosch Portable Planer GHO 26-82 D

The wired plane is an all-round plane. Its powerful 710 watt motor delivers fast and accurate planing results. The plan...

The wired plane is an all-round plane. Its powerful 710 watt motor delivers fast and accurate planing results. The planer also has an adjustable chip ejector on the left or right. In addition, the compact design offers convenient handling, making it possible to work even in places that are difficult to access. This power tool is suitable for planing wood.

  • Planing knife width 82 mm
  • Cutting depth up to 2.6 mm
  • Fold depth adjustable up to 9 mm.

Scope of delivery:

  • Allen key
  • cloth dust bag
  • rip fence

Supplied consumables:

  • planing knife
> More
In other station
1,27-3,70 €/hr
Festool Upper milled OF 1010 EBQ

Festool Upper milled OF 1010 EBQ

Whether freely guided or on the guide rail, the OF 1010 router is the ideal one-hand tool. Thanks to its size and low w...

Whether freely guided or on the guide rail, the OF 1010 router is the ideal one-hand tool. Thanks to its size and low weight, it can be precisely guided along edges, lines or curves with just one hand. Easy cutter change thanks to spindle stop. Simple and 1/10 mm accurate adjustment of the milling depth. More safety thanks to quick brake. MMC Electronic for material-specific work and temperature monitoring. Chip extraction integrated in the milling table.

Scope of delivery :

  • Systainer
  • Guide rail FS 800
  • guide rail adapter
  • side stop
  • chip catcher
  • Collet 8mm
  • 14 pieces cutter set
> More
In other station
1,27-3,70 €/hr
Stihl Cordless Power Saw MSA 200 C BQ

Stihl Cordless Power Saw MSA 200 C BQ

36 volt battery-powered chainsaw with high cutting performance for use in noise-sensitive areas.Cutting thick branches ...

36 volt battery-powered chainsaw with high cutting performance for use in noise-sensitive areas.

Cutting thick branches and light trunks is no problem with this tool.

  • Cutting length 35 cm. 
  • Battery life max. 42 min (depending on the application, the battery life may vary). 

Scope of delivery:

  • 2 batteries
  • Charger

Supplied consumables:

  • Saw chain 
  • Adhesive oil
> More
In other station
1,06-3,10 €/hr
Stihl Cordless Power Saw MSA 140 C

Stihl Cordless Power Saw MSA 140 C

Handy lightweight 36 volt battery-powered chainsaw for property maintenance and simple manual work in noise-sensitive a...

Handy lightweight 36 volt battery-powered chainsaw for property maintenance and simple manual work in noise-sensitive areas.              Cutting length 30 cm Battery life max. 45min (depending on application battery life may vary)

Scope of delivery:

  • 2 batteries 
  • charger

Supplied spray material

  • saw chain
> More
In other station
0,41-1,20 €/hr
Bessey cans countersink TU + TFM-2K

Bessey cans countersink TU + TFM-2K

Gently and precisely fixes and supports door linings when foaming the wall joint. Telescopic anodised aluminium 4-sided...

Gently and precisely fixes and supports door linings when foaming the wall joint.

  • Telescopic anodised aluminium 4-sided tube with mm scale and locking screw for accurate work.
  • Cross-shaped pressure plate with felt protection for sensitive door chucks with a depth of 6 to 13 cm or 13 to 30 cm.
  • Reversible clamping brackets with enlarged clamping surfaces and removable brackets for safe and easy insertion of the door chuck.

Scope of delivery :

  • 3 Door chuck clamps TU
  • 4 Door chucks Directional clamps TFM-2K
  • 1 carrier bag 
> More
In other station
1,54-4,50 €/hr
Fein Multi Tool FMM 350 QSL

Fein Multi Tool FMM 350 QSL

The perfect machine for finishing and renovation work with a wide range of accessories for an outstanding variety of ap...

The perfect machine for finishing and renovation work with a wide range of accessories for an outstanding variety of applications.

  • Mains voltage 230 V
  • Nominal power consumption350 W
  • Tool holder StarlockPlus
  • Tool change QuickIN

 Scope of delivery :

  • Transport case
  • grinding plates
  • sanding sheets
  • suction device
  • firm spatula
  • E-Cut Long-Life Saw Blade (35 mm)
  • Universal E-Cut saw blade (44 mm)
  • E-Cut Long-Life saw blade (65 mm)
  • HSS segment saw blade
  • Carbide segment saw blade
  • Carbide rasp (triangular shape)
> More
In other station
1,23-3,60 €/hr
Bosch Battery cartridge press GCG 18V-310

Bosch Battery cartridge press GCG 18V-310

The compact 18V battery cartridge press - for cartridges up to 310 ml capacity.Speed preselection with 9 speed settings...

The compact 18V battery cartridge press - for cartridges up to 310 ml capacity.


  • Speed preselection with 9 speed settings and trigger for variable speed easy regulation of the material flow
  • Thanks to 3.5 kN pressure force and a maximum feed rate of 8 mm/s, fast working progress even with viscous adhesives
  • Thanks to the automatic reverse function, the pressure on the plunger rod is stopped when the trigger is released, preventing dripping or leaking of the material


Included accessories :

  • 2 rechargeable batteries
  • Charger
> More
In other station
0,69-2,00 €/hr
Metabo Paint milling machine LF 724 S

Metabo Paint milling machine LF 724 S

Paint milling machine Metabo LF 724 SUp to 70% time saving compared to conventional working techniques.For environmenta...

Paint milling machine Metabo LF 724 S


Up to 70% time saving compared to conventional working techniques.

For environmentally friendly removal of paint and varnish from flat wooden surfaces such as stairs, doors and windows

Suitable for processing untreated wood

Suitable for rebate processing due to lateral knives

Stepless adjustment of the milling depth

Carbide reversible blades can be used on four sides for a long service life

Suction possibility through connection of an all-purpose vacuum cleaner

  • Torque 2 Nm
  • Flying edge circle 80 mm
  • Largest fold depth unlimited
  • Lateral milling height 28 mm
  • Axial milling depth 0 - 0.3 mm
  • Radial milling depth 0.15 mm
  • Nominal power input 710 W
  • Output power 430 W
  • Idling speed 10000 /min
  • Speed at nominal load 6700 /min
  • Cable length 4 m

Supplied accessories :

  • HM-Reversing blade for LF
> More
In other station
1,03-3,00 €/hr
Flex Grinding giraffe GE 5 R + TB-L + SH

Flex Grinding giraffe GE 5 R + TB-L + SH

Very handy, light machine with optimum operating comfort. Enables fatigue-free and ergonomic working.Technical data :Po...

Very handy, light machine with optimum operating comfort. Enables fatigue-free and ergonomic working.


Technical data :

Power consumption 500 watts

Power output 270 Watt

Idling speed 1100-1650 /min

grinding wheel Ø 225 mm

Clip tool holder

Angle of inclination at the head 100 °

length 1520 mm

Cable length 5,0 m

Weight 3,9 kg


Scope of delivery :


Sanding sheets K.80

Sanding sheets K.100

> More
In other station
1,00-4,00 €/hr
Roll Grinding attachment Schleifvorsatz 330 mm

Roll Grinding attachment Schleifvorsatz 330 mm

Grinding attachmentLong grinding attachment for edge grinding machine NovaEasily exchangeable grinding attachment for u...

Grinding attachment

Long grinding attachment for edge grinding machine Nova

Easily exchangeable grinding attachment for use of the Nova edge grinding machine under radiators.

  • length 330mm
> More
In other station
0,31-0,90 €/hr
Proxxon Roll grinder WAS/E

Proxxon Roll grinder WAS/E

Roll grinderFor grinding and finishing of surfaces made of steel, non-ferrous metal and stainless steel.Motor with infi...

Roll grinder

For grinding and finishing of surfaces made of steel, non-ferrous metal and stainless steel.

Motor with infinitely variable speed control for material-specific work and constant speed even at high contact pressure.


Technical data :


- Output: 100 W

- Speed range: 800 - 2,800/min

- length: 270 mm

- Weight: 900 g


> More
In other station
0,31-0,90 €/hr
Proxxon Long-neck angle grinder LHW

Proxxon Long-neck angle grinder LHW

Long neck angle grinderUnsurpassed versatility due to long, slim gear head.For machining steel, non-ferrous metal, glas...

Long neck angle grinder


Unsurpassed versatility due to long, slim gear head.

For machining steel, non-ferrous metal, glass, ceramics, wood and plastic.

Voltage 230 V 

100 watts 

Speed: 13.000/min 

Length 250 mm 

Insulated according to class 2


Supplied accessories:

Rasp disc

Lamella disc corundum

> More
In other station
0,75-2,20 €/hr
Makita Battery Impact Drill DHP 459 RTJ / DHP 484

Makita Battery Impact Drill DHP 459 RTJ / DHP 484

Handy, powerful 18 volt cordless impact drill with switchable percussion mechanism.Ideal for most applications.Torque a...

Handy, powerful 18 volt cordless impact drill with switchable percussion mechanism.

Ideal for most applications.

  • Torque adjustable in 16 steps.
  • Maximum torque 45Nm

Scope of delivery :

  • Transport case
  • charger
  • 2 batteries
  • bit set
  • Multi-purpose drill set 4,5,6,8,10,12mm
  • Wood twist drill set 3,4,5,6,7,8,9,10mm
> More
In other station
1,20-3,50 €/hr
Makita cordless hand saw DHS 680 RTJ

Makita cordless hand saw DHS 680 RTJ

Powerful battery hand circular saw with a cutting depth of 57mm.Ideal for roof work and interior finishing.Tilt adjustm...

Powerful battery hand circular saw with a cutting depth of 57mm.

Ideal for roof work and interior finishing.

  • Tilt adjustment up to 50°.
  • Blowing device keeps the interface clean, with bright LED.
  • Idle speed 5,000 min-1
  • Cutting capacity 0° 57 mm
  • Cutting capacity 45° 41 mm

Scope of delivery :

  • Transport case
  • charger
  • 2 batteries
  • rip fence
  • HM saw blade 24 teeth
> More
In other station
1,20-3,50 €/hr
Bosch Cordless Circular Saw GKS 18V-57

Bosch Cordless Circular Saw GKS 18V-57

Battery operated circular hand saw for all robust sawing work up to max. 57mm cutting depth.An integrated LED ensures g...

Battery operated circular hand saw for all robust sawing work up to max. 57mm cutting depth.

An integrated LED ensures good visibility even in dark places.

Maximum performance due to powerful DC motor with optimized cutting speed. 

Scope of delivery:

  • Quick charger
  • 2 x Battery
  • allen wrench

Supplied consumables:

  • circular saw blade Optiline Wood
> More
In other station
0,72-2,10 €/hr
Makita Random Orbit Sander BO 6030  JX

Makita Random Orbit Sander BO 6030 JX

Powerful low-vibration random orbit sander for comfortable working.The eccentric movement ensures the finest sanding wi...

Powerful low-vibration random orbit sander for comfortable working.

The eccentric movement ensures the finest sanding with high sanding performance.

Diameter grinding wheel 150 mm

Oscillating circuit 3 mm

Power consumption 310 Watt


Scope of delivery :

  • Transport case
  • Dust bag
  • Grinding wheels K 80 , 120 , 180
> More
In other station
1,34-4,90 €/hr
DeWalt Alligator Saw DCS397T2

DeWalt Alligator Saw DCS397T2

Special battery-powered saw for the toughest applications. Ideal for sawing wood and poroton up to strength class 20 N/...

Special battery-powered saw for the toughest applications. Ideal for sawing wood and poroton up to strength class 20 N/mm².

Durable, low-vibration and recoilless double saw blade system with quick saw blade stop within 3 seconds.

Reinforced sword for higher accuracy, more precise cuts and significantly longer service life. Saw blade length:430mm

Scope of delivery:

  • 2 batterys 
  • charger

Supplied consumables:

  • special saw blade for cutting e.g. poroton, hollow bricks
> More
In other station
1,20-3,50 €/hr
Stihl Electric Chain Saw MSE 141 C-Q

Stihl Electric Chain Saw MSE 141 C-Q

Handy, light electric chainsaw for property maintenance and simple manual work in noise-sensitive areas. Cutting length...

Handy, light electric chainsaw for property maintenance and simple manual work in noise-sensitive areas.

  • Cutting length 35 cm
  • Power consumption 1.4 kW

Supplied consumables: 

  • saw chain 
  • adhesive oil
> More
In other station
1,37-4,00 €/hr
Metabo Cross cut saw KGSV 72 Xact SYM

Metabo Cross cut saw KGSV 72 Xact SYM

Chop saw Metabo KGSV 72 Xact SYMUnique, patented combination of panel saw with pulling function and precise moulding sa...

Chop saw Metabo KGSV 72 Xact SYM


Unique, patented combination of panel saw with pulling function and precise moulding saw with symmetrically adjustable stop system

Time-saving and precise sawing of mitres without calculating and measuring by simple angle transfer from bevel to stop system

  • Compact pull function for wide workpieces up to 305 mm: no space required behind the saw
  • Maximum flexibility during sawing due to table rotating on both sides and saw head inclinable on both sides
  • Double line laser for exact display of the cutting line left and right of the saw blade
  • With saw blade "multi cut" (flat/trapezoidal tooth) for high cutting quality and long service life e.g. in laminate and aluminium profiles
  • Effective chip extraction via integrated chip collection funnel
  • Quick and precise adjustment of common angles via snap-in points
  • Bright LED work light for illumination of the interface (mains-operated, no batteries required)


Technical data :


  • Max. cutting width 90°/45° 305/ 215 mm
  • Max. cutting depth 90°/45° 72/ 42 mm
  • Cutting capacity 90°/90° 305 x 72 mm
  • cutting capacity 45°/45° 215 x 42 mm
  • Rotary disk adjustment left/right 50/50 °
  • Saw blade inclination left/right 47/47 °
  • Saw blade 216 mm
  • Rated input power S1 100% 1500 W
  • Rated input power S6 20% 1800 W
  • Idling speed 2200 - 6300 /min
  • cutting speed 25 - 70 m/s
  • Cable length 3 m
> More
In other station
1,06-3,10 €/hr
Bosch Wet/dry vacuum cleaner GAS 35M AFC

Bosch Wet/dry vacuum cleaner GAS 35M AFC

Wet/dry vacuum cleaner Bosch GAS 35M AFCVersatile wet/dry vacuum cleaner with automatic filter cleaning.L-BOXX can be c...

Wet/dry vacuum cleaner Bosch GAS 35M AFC

Versatile wet/dry vacuum cleaner with automatic filter cleaning.

L-BOXX can be clicked on as a practical transport and storage solution for mobile use

Permanent suction power for continuous work progress through automatic filter cleaning (AFC)

  • As a certified safety vacuum cleaner of dust class M according to EU standard, it covers most of the dust for high user protection


  • Max. input power 1,380 W
  • Weight 12,4 kg
  • Gross tank volume 35 l
  • Tank volume net 23 l
  • Tank volume net water 19.2 l
  • Dust class Wet/dry vacuum cleaner M
  • Dust class M
  • Tool dimensions (width) 450 mm
  • Tool dimensions (length) 515 mm
  • Tool dimensions (height) 575 mm
  • Filter area 6.150 cm²Max.
  • Air flow velocity (turbine) 74 l/sMax.
  • negative pressure (turbine) 254 mbar
> More
In other station
1,37-4,00 €/hr
Metabo Band file BFE 9-20

Metabo Band file BFE 9-20

Tape file Metabo BFE 9-20Powerful, compact belt file for grinding, satin finishing and deburring in hard-to-reach areas...

Tape file Metabo BFE 9-20

Powerful, compact belt file for grinding, satin finishing and deburring in hard-to-reach areas.

Grinding attachment can be swivelled 270° without tools for perfect adjustment to any working position.

Tool-free abrasive belt change and adjustable belt guide.

Technical data :

  • Nominal power input 950 W
  • Output power 510 W
  • Belt speed idle 9 - 20 m/s
  • Sanding belt width 6 - 19 mm
  • Sanding belt length 457 mm
  • Working length of sanding belt arm 90 mm
  • Cable length 4 m

Supplied accessories :

  • Abrasive belts Zirkon 6x457mm K.60
  • Abrasive belts Zirkon 6x457mm K.120
  • Abrasive belts zircon 19x457mm K.60
  • Abrasive belts Zirkon 19x457mm K.120
  • Fleece tapes 6x457mm medium
  • Fleece tapes 19x457 medium
> More
In other station
0,72-2,10 €/hr
Bosch Orbital sander GSS 230 AVE

Bosch Orbital sander GSS 230 AVE

Orbital sander Bosch GSS 230 AVE. First-class surface quality with lowest vibrations of its class (less than 2.5 m/s²)...

Orbital sander Bosch GSS 230 AVE. First-class surface quality with lowest vibrations of its class (less than 2.5 m/s²) due to decoupled motor housing.

Uniform distribution of contact pressure for high surface quality

Perfect sandpaper fit even with paper without Velcro fastener due to the new paper tensioning system.

  • Rated input power 300 W
  • Idling speed 8,000 - 11,000 rpm
  • Number of oscillations at no load 16.000 - 22.000 min-1
  • Resonant circuit diameter 2.4 mm
  • Weight 2,4 kg

Supplied accessories :

  • Sanding sheets
  • K40, K60, K80, K120, K180
> More
In other station
0,33-0,95 €/hr
Proxxon Disc sanding machine TSG250/E

Proxxon Disc sanding machine TSG250/E

Disc sanderFor finest grinding work and smallest material corrections.Adjustable grinding speed from 250 - 800 m/min.Fo...

Disc sander


For finest grinding work and smallest material corrections.

Adjustable grinding speed from 250 - 800 m/min.

For all types of wood, steel, non-ferrous metal, precious metal, plastic (also Plexiglas and GFK)


Technical data:

220 - 240 volts,

 Drive via Optibelt toothed belt (reduction ratio 7.3:1). Electronically adjustable grinding speed from approx. 250 - 750 m/min. 

Grinding disc Ø 250 mm, 

max. grinding height 135 mm. 

Table 275 x 105 mm (adjustable by 45° downwards, 15° upwards). 


Supplied accessories :

disc grinding wheels K80, K150, K240

> More
In other station
0,33-0,95 €/hr
Proxxon Fine Cut - Table Circular Saw FET

Proxxon Fine Cut - Table Circular Saw FET

Carbide tipped saw blade height adjustable by 1/10 mm with adjusting screw for fine adjustment of the rip fence, tiltab...

Carbide tipped saw blade height adjustable by 1/10 mm with adjusting screw for fine adjustment of the rip fence, tiltable up to 45°.

For precise, straight cuts without reworking.

For cutting wood, non-ferrous metal, plastic, Plexiglas, GFK sheets, foam and many other materials.


Technical data:

230 V

7,000/min.

mitre steplessly adjustable up to 45

Table size 300 x 300 mm

Cutting depth 1 - 22 mm (depending on saw blade diameter)

Saw blades from 50 - 85 mm (with 10 mm bore) can be used.

Weight approx. 6 kg


Supplied accessories :


HM Saw blade (80mm diameter)

Diamond disc (85mm diameter)

> More
In other station
0,31-0,90 €/hr
Proxxon Motorised carver MSG

Proxxon Motorised carver MSG

For carving all types of wood.For renovating and processing furniture .For linocut and fine paint removal.Supplied acce...

For carving all types of wood.


For renovating and processing furniture .

For linocut and fine paint removal.

Supplied accessories :

Spare - Carving knife inserts

Multiform - whetstone

> More
In other station
0,72-2,10 €/hr
Makita vibrating grinder BO 4900 VJ

Makita vibrating grinder BO 4900 VJ

Fine-grinding orbital sander with high stock removal rate.Anti-vibration system for fatigue-free work.Electronically ad...

Fine-grinding orbital sander with high stock removal rate.

Anti-vibration system for fatigue-free work.

Electronically adjustable vibration/stroke rate.

Abrasive paper fastening via quick-release lever or practical Velcro fastener.

Power consumption 330 Watt

Oscillating circuit 2.6 mm

Paper size 115 x 280 mm

Paper size Velcro 115 x 232 mm


Scope of delivery :


  • Transport case
  • Dust bag
  • sanding sheets
> More
In other station
1,20-3,50 €/hr
Makita Battery Jigsaw DJV 181 RT 1 J

Makita Battery Jigsaw DJV 181 RT 1 J

Light and handy pendulum jigsaw with 3-fold pendulum stroke adjustment plus neutral position.Cooling air blows the inte...

Light and handy pendulum jigsaw with 3-fold pendulum stroke adjustment plus neutral position.

  • Cooling air blows the interface free.
  • Die-cast aluminium base plate swivels 45° on both sides.
  • Electronically adjustable number of strokes.
  • Tool-free saw blade change.
  • With double LED.
  • Cutting capacity in wood 135 mm , in steel 10 mm.


Scope of delivery :

  • Transport case
  • charger
  • 2 batteries
  • Slide shoe plastic
  • suction socket
  • Saw blades for wood and metal
> More
In other station
1,12-3,60 €/hr
Makita Battery saw DJR 187 RT

Makita Battery saw DJR 187 RT

Very light and handy rechargeable Recipro saw.Very fast sawing progress.Adjustable guide shoe for optimal use of the sa...

Very light and handy rechargeable Recipro saw.

Very fast sawing progress.

Adjustable guide shoe for optimal use of the saw blade.

Ideal for sawing wood, gypsum boards, metal (pipes and profiles) and even stones such as aerated concrete and sand-lime bricks.


Scope of delivery :

  • Transport case
  • charger
  • 2 batteries
  • Saw blades for wood or metal
> More
In other station
2,23-6,50 €/hr
Schwamborn Single disc machines driving plate .

Schwamborn Single disc machines driving plate .

Single disc machines driving plate SchwambornFor e.g. oil parquet.Pad holder 406 mmSupplied accessories :Grinding wheel...


Single disc machines driving plate Schwamborn


For e.g. oil parquet.

Pad holder 406 mm

Supplied accessories :

  • Grinding wheel pad 
> More
In other station
0,72-2,10 €/hr
Makita cordless screwdriver DFS 452 RTJ

Makita cordless screwdriver DFS 452 RTJ

Ideal for mounting plasterboards on wood and metal constructions. Idle speed 0-4.000 minScope of delivery :Transport ca...

Ideal for mounting plasterboards on wood and metal constructions.

Idle speed 0-4.000 min

Scope of delivery :

  • Transport case
  • 2 batteries
  • charger
  • Bit PH 2
> More
In other station
0,72-2,10 €/hr
Bosch Swinging Grinder GSS 160 Multi

Bosch Swinging Grinder GSS 160 Multi

Robust, compact, one-handed multi orbital sander for corners, edges and surfaces. The simple sanding plate change offer...

Robust, compact, one-handed multi orbital sander for corners, edges and surfaces. The simple sanding plate change offers the user highest flexibility.

Two different sanding plates are available: Delta sanding plate 100x150mm and sanding plate 80x130mm. 

Scope of delivery: 

  • Screwdriver to change the sanding plate
  • Dust box
  • Delta sanding plate
  • grinding plate 80x130mm

Supplied consumables: 

  • Sanding sheet for wood and paint K40
  • Sanding sheet for wood and paint K60
  • Sanding sheet for wood and paint K80
  • Sanding sheet for wood and paint K120
> More
In other station
0,96-2,80 €/hr
Bosch Portable Planer GHO 40-82 C

Bosch Portable Planer GHO 40-82 C

The 850 Watt wired planer achieves an excellent surface quality. Ultrasonic knives and constant speed ensure excellent ...

The 850 Watt wired planer achieves an excellent surface quality. Ultrasonic knives and constant speed ensure excellent planing results and a high surface quality. In addition, the simple cutting depth adjustment enables fast and convenient working.

  • Planing knife width 82 mm
  • Cutting depth up to 4.0 mm
  • Fold depth adjustable up to 24 mm.


Scope of delivery: 

  • Dust bag
  • rip fence
  • rebate depth stop

Supplied consumables: 

  • planing knife
> More
In other station
0,69-2,00 €/hr
Festool hand circular saw TS 55 EBQ

Festool hand circular saw TS 55 EBQ

The combination of plunge saw and guide bar allows exact and tear-free cuts up to 55 mm without time-consuming reworkin...

The combination of plunge saw and guide bar allows exact and tear-free cuts up to 55 mm without time-consuming reworking.

Perfect cutting to length of interior doors - guide rail with plunge saw.

Creation of expansion joints in parquet floors and shadow joints (wall distance 12 mm). Cutting of board material


  • Power consumption 1 200 W
  • Angle range -1 - 47 °
  • Cutting depth 0 - 55 mm
  • Cutting depth 45° 43 mm


Scope of delivery :

  • Transport case
  • Immersion Saw with HM Saw Blade 48Z
  • Guide rail 1,4m in pocket
> More
In other station
0,96-2,80 €/hr
Festool belt sanders BS 75 E

Festool belt sanders BS 75 E

Extremely handy belt grinder for removing, plane grinding, smoothing and cleaning on wood, plastic and metal.Belt lengt...

Extremely handy belt grinder for removing, plane grinding, smoothing and cleaning on wood, plastic and metal.

  • Belt length x belt width 533 x 75 mm

Scope of delivery :

  • Transport case
  • extraction adapter
  • dust bag
  • stationary device
  • sanding belts
> More
In other station
0,69-2,00 €/hr
Metabo Electric tacker T AE 2019

Metabo Electric tacker T AE 2019

Electric tacker Metabo Ta E 2019For processing staples, nails, profiled wood claws and joint clawsAlso suitable for pro...

Electric tacker Metabo Ta E 2019

For processing staples, nails, profiled wood claws and joint claws

Also suitable for processing flat wire staples

Impact force regulation for adjusting the cutting depth

Look-up facility for incompletely driven-in staples

Nose with groove for targeted tacker placement

Protection against unintentional release of the impact

Technical data :

  • Max. pulse sequence 20 /min
  • Length staples (4 mm wide) 12 - 18 mm
  • Length staples (10 mm wide) 8 - 18 mm
  • Length flat wire clamps, (10 mm wide) 8 - 14 mm
  • Length nails 19 mm
  • Cable length 2.55 m

Supplied accessories :

  • Fine wire staples type 53/8 mm
  • Fine wire clamps type 53/10 mm
  • Fine wire clamps type 53/12 mm
> More
In other station
0,48-1,40 €/hr
E-Flor Plate lift 151 - 342 cm

E-Flor Plate lift 151 - 342 cm

Galvanized panel lift- Lifting height adjustable from 1510 to 3420 mm- Maximum load capacity approx. 50 kg (corresponds...

Galvanized panel lift


- Lifting height adjustable from 1510 to 3420 mm

- Maximum load capacity approx. 50 kg (corresponds to approx. 3.8 m² plasterboard (12.5 mm)

- Wheels lockable

- Frame and beams completely galvanized

- With hand winch

> More
In other station
1,13-3,30 €/hr
Bosch Flat dowel milling machine GFF 22 A

Bosch Flat dowel milling machine GFF 22 A

The precise specialist for wood jointsSmooth immersion function and robust metal angle guides for precise resultsA wide...

The precise specialist for wood joints

Smooth immersion function and robust metal angle guides for precise results

A wide range of angle and depth settings ensure a wide variety of joint cutting applications

Powerful 670 watt motor for optimum milling performance for the production of frame, corner, longitudinal and cross joints

Technical data :

  • cutting depth, max.22 mm
  • Idling speed 9,000 rpm
  • Cutter diameter bore 22 mm
  • Cutter diameter 105 mm
  • Rated input power 670 W
  • Voltage, electrical 230 V

Scope of delivery :

  • HM Disc cutter 4 mm for flat dowel connections
> More
In other station
0,33-0,95 €/hr
Proxxon Engraving machine GG12

Proxxon Engraving machine GG12

The engraving machine is ideal for decorating and processing soft materials such as glass, wood or non-ferrous metals.S...

The engraving machine is ideal for decorating and processing soft materials such as glass, wood or non-ferrous metals.


Supplied accessories :

Diamond grinding pencil 1,0mm

Diamond mounted point 1,8mm

Mounted point silicon carbide

mounted point aluminium oxide ball

mounted point aluminium oxide cylindrical

> More
In other station
1,03-3,00 €/hr
Festool long neck grinder LHS 225 EQ-Plus/SW

Festool long neck grinder LHS 225 EQ-Plus/SW

Ideal for sanding plasterboard and drywall fillers, or for removing wallpaper residues.You can rent the suitable vacuum...

Ideal for sanding plasterboard and drywall fillers, or for removing wallpaper residues.

You can rent the suitable vacuum cleaner for vacuuming separately !

Scope of delivery :

  • Transport case
  • Long neck sander with grinding disc "super soft".
  • 5 each grinding wheels 225mm K.80 and K.100
> More
In other station
1,10-3,20 €/hr
Bosch Paint spraying system PFS 5000 E

Bosch Paint spraying system PFS 5000 E

No need for a brush - fast and even application on structured surfaces and edges.Fast paint application with 3 m²/min ...

No need for a brush - fast and even application on structured surfaces and edges.

Fast paint application with 3 m²/min for large to very large projects indoors and outdoors.

Two large 1,000 ml colour containers save valuable time by reducing the need for refilling during work.

ALLPaint spraying system: for spraying wall paints, glazes or varnishes on wood or metal.

Technical data :

  • Nominal power consumption 1200 Watt
  • Delivery rate 500 ml/min
  • paint application 3 m² in 1 min
  • Container volume 1.000 ml
  • Machine weight 4,8 kg
  • Hose length 4,0 m

Supplied accessories :

  • Nozzle for lacquer paint (black)
  • Nozzle for glazes (grey)
  • Nozzle for wall paint (white)
  • Colour filters
  • Cleaning brush
  • 2 x 1000 ml paint container with lid.
> More
In other station

Wish tool not there?
Then just write us!

If you want tools for the Toolstation near you that we don't have at hand yet: write us! By the way, we adapt the range of tools seasonally.