Very handy battery angle grinder with electronic speed control.

Grinding wheel diameter 125 mm

bore 22,23 mm

Max. Cutting depth 29 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Cutting disc 125x1mm
• Roughing disc 125x6mm

Powerful handy angle grinder with a disc diameter of 125mm.

Power consumption 1100 Watt.

Mains voltage 230 Volt

Scope of delivery :

• Transport case
• Metal saw blade 125x1mm
• Flange,Clamping nut,Wrench

Compact polisher for fatigue-free machining of large surfaces.

The 2.5 kg light polishing unit gives metal and painted surfaces the finishing touch.

Equipped with a powerful 1,400 watt motor, this handy machine polishes even large surfaces and runs smoothly and evenly over the painted surfaces.

• Backing pad M 14 Ø 150 mm

Scope of delivery :

• Transport bag
• Backing pad 150mm
• Foam disk hard 170mm
• Polishing sponge soft 170mm
• Lambskin hood 170mm

Sabre saw with powerful 18 Volt motor for a wide range of applications. Comfortable to handle. Thanks to variable cutting speed preselection, you can saw a wide variety of materials. The foot plate is adjustable to make full use of the saw blade.  

Scope of delivery: 

• Quick charger
• 2 x battery

Supplied consumables: 

• reciprocating saw blade S 922 BF
• Sabre saw blade S 1122 HF
• Sabre saw blade S 2345 X

Sheet punch is perfect for clean and burr-free punching of plastics and steel sheets.

For a good punching result, this sheet metal punch has 3 cutting tips.

Ideal e.g. for mounting a sink tap (water tap).

• Pre-drill approx. 8.5 mm for pull screw.

E-welder Gys Gysmi 160 P Set

The GYSMI 160 P is an innovative, microprocessor-controlled manual electric welding machine with high arc dynamics for successful welding work. Suitable for the requirements of experienced do-it-yourselfers. Practical and lightweight (4.2kg).

Low power consumption 16A-230V

Insensitive to current and arc fluctuations.

Protected against mains overvoltages of up to 400 Volt, generator-compatible 6kW (7.5kVA)

Increased open circuit voltage of 72V for good ignition performance

Regulates the arc, the arc length is kept almost constant. 

Supplied accessories :

electrodes 1,6   

Electrodes 2.0

Electrodes 2,5

Electrodes 3.2

Electrodes 4.0

Carrying bag

For precision engineering, laboratory and workshop.

Practical height adjustment via gear rack with smooth-running crank.

Technical data :

220 - 240 Volt

Spindle speeds: 1,080 - 2,400 and 4,500/min

quill stroke 63 mm

height adjustment via crank 70 mm

Drilling capacity in steel 10 mm 

Throat 140 mm

Usable table area 200 x 200 mm

column 45 x 500 mm

Tool holding up to 10 mm by means of a gear rim drill chuck 

Weight approx. 10 kg

Supplied accessories :

Machine vice Primus 100

Fastening set for vice

Cordless angle grinder Bosch GWS 18V-SC

Small angle grinder with the same power as a wired grinder with 1,000 watts thanks to brushless EC motor.

• Idle speed 4,500 - 9,000 rpm
• Battery voltage 18 V
• Grinding spindle thread M 14
• Drill hole 22,23 mm

Supplied accessories :

• 2 batteries 5,0 Ah
• Battery charger
• Cutting discs 125 x 1 mm metal

Jigsaw STS 12/E

Ideal for curved cuts in wood (up to 10 mm), blanks (up to 3 mm) and non-ferrous metal (up to 2.5 mm)

Powerful DC - special motor.

Stepless stroke rate control with feedback effect.

Additional ball adapter for machining convex and concave surfaces.

Supplied accessories :

Saw blades, coarse and fine

Powerful impact wrench with very high torque of 440 Nm.

Short design of only 266 mm.

Practical, large-surface right/left rotation switch.

Separately switchable bright LED.

Tool holder 1/2"

Scope of delivery :

• Transport case
• 2 batteries
• charger
• Socket wrench (nut) 8,10,13,16,17,18,19,21,24 mm

Powerful 18 Volt battery angle grinder with 125mm disc diameter and speed preselection adjustable in three steps. Optimum handling due to low weight.

Scope of delivery: 

• Transport case
• receiving flange
• clamping nut
• two-hole wrench
• Additional handle
• 2 batteries
• charger

Supplied consumables: 

• Cutting discs Ø 125 mm for metal 

The XP ORX 22 WSA impresses with its simple operation, good search performance and its low weight of only 770 grams. Dar Detector is a completely wireless detector with radio connection to the search coil and headphones.

Performance data:

• 4 factory programs: 2x gold search, coins and relics and 2 storable user programs
• Fast and secure radio connection, latest technology: coil - remote control - headphones - pinpointer MI-6.
• Conductance display with iron probability indicator
• 99 sensitivity levels
• 99 levels of discrimination + 5 levels of discrimination in the IAR gold search programs
• 20 levels for the background tone (Threshold)
• 4 selectable reaction times
• Iron sound with audio pitch (can be switched on/off)
• Soil levelling Automatic (Fast levelling - Fast Grab) and manual from 60 - 90
• Saltwater fashion for beach with ground suppression 00-25
• Pinpoint function with target zoom
• Display illumination
• WSA radio headphone system with volume control (depending on variant)
• S-telescopic linkage LITE
• Weight only 770 grams (remote control worn on belt)
• Lithium polymer batteries without memory effect (recharge via USB)
• Battery capacities per charge coil, 20 - 28 hours, remote control 19 hours, WSA radio headphones 15 hours
• Software update possible (on remote control via USB cable)
• Go Terrain App compatible

Scope of delivery:

•  Remote control
• 22,5cm double-D HF search coil, 6m waterproof
• Coil protection
• Screw set for HF coils
• S-telescopic linkage LITE
• Lithium polymer batteries
• USB charging cable

The compact 18V battery cartridge press - for cartridges up to 310 ml capacity.

• Speed preselection with 9 speed settings and trigger for variable speed easy regulation of the material flow
• Thanks to 3.5 kN pressure force and a maximum feed rate of 8 mm/s, fast working progress even with viscous adhesives
• Thanks to the automatic reverse function, the pressure on the plunger rod is stopped when the trigger is released, preventing dripping or leaking of the material

Included accessories :

• 2 rechargeable batteries
• Charger

Paint milling machine Metabo LF 724 S

Up to 70% time saving compared to conventional working techniques.

For environmentally friendly removal of paint and varnish from flat wooden surfaces such as stairs, doors and windows

Suitable for processing untreated wood

Suitable for rebate processing due to lateral knives

Stepless adjustment of the milling depth

Carbide reversible blades can be used on four sides for a long service life

Suction possibility through connection of an all-purpose vacuum cleaner

• Torque 2 Nm
• Flying edge circle 80 mm
• Largest fold depth unlimited
• Lateral milling height 28 mm
• Axial milling depth 0 - 0.3 mm
• Radial milling depth 0.15 mm
• Nominal power input 710 W
• Output power 430 W
• Idling speed 10000 /min
• Speed at nominal load 6700 /min
• Cable length 4 m

Supplied accessories :

• HM-Reversing blade for LF

Bosch Battery Sheet Nibbler GNA 18V

The 18V nailer for flexible cuts.

• Cutting capacity steel (800 N/mm²), max.0.7 mm
• Cutting capacity steel (600 N/mm²), max.1 mm
• Cutting capacity steel (400 N/mm²), max.1,6 mm
• Cutting capacity aluminium (250 N/mm²), max.2 mm
• Minimum curve radius 40 mm

Scope of delivery :

• 2 batteries
• Charger
• Carrying case

Roll grinder

For grinding and finishing of surfaces made of steel, non-ferrous metal and stainless steel.

Motor with infinitely variable speed control for material-specific work and constant speed even at high contact pressure.

Technical data :

- Output: 100 W

- Speed range: 800 - 2,800/min

- length: 270 mm

- Weight: 900 g

Long neck angle grinder

Unsurpassed versatility due to long, slim gear head.

For machining steel, non-ferrous metal, glass, ceramics, wood and plastic.

Voltage 230 V 

100 watts 

Speed: 13.000/min 

Length 250 mm 

Insulated according to class 2

Supplied accessories:

Rasp disc

Lamella disc corundum

Powerful angle grinder with 230 mm disc diameter.

Optimum handling due to soft start and low weight.

Power consumption 2200 Watt

Max. Cutting depth 68mm

Ideal for steel and concrete work.

Scope of delivery :

• Diamond cutting disc for concrete work 
• steel saw blade

Battery operated jigsaw with powerful 18 Volt battery system. The maximum cutting depth in wood is 120 mm, in aluminium 20 mm and in metal 8 mm (depending on the saw blade). Bevel cuts from 0-45° possible, SDS saw blade change with only one hand.

Scope of delivery:

• Quick charger
• 2 battery

Supplied consumables:

• Jigsaw blades T101B wood
• Jigsaw blades T118B metal

Pipe belt grinder Metabo RBE 9-60 SET

Compact pipe belt grinder with high belt speeds for the productive processing of stainless steel pipes.

Large wrap angle of 190° for a surface without any build-up.

Vario-Constamatic (VC) full-shaft electronics with adjusting wheel: for working at material-specific speeds that remain almost constant under load.

Tool-free sanding belt change and adjustable belt guide.

Electronic soft start for jerk-free starting.

Technical data :

• Nominal power input 900 W
• Output power 470 W
• Belt speed idle 8 - 14 m/s
• grinding belt dimensions 30 x 533 mm
• Max. Pipe diameter 60 mm
• Wrap angle 190 °
• Cable length 4 m

Supplied accessories :

• Abrasive belts Zirkon K.80
• Abrasive belts Pyramid K.280
• Sanding belts Pyramid K.400
• Sanding belts Pyramid K.600
• Sanding belts Pyramid K.1200
• Fleece tapes medium

Micro - Band saw MBS 240/E

For a perfect cut in steel, non-ferrous metal, wood and plastic.

With 3-fold ball bearing mounted band guide.

Slot for mitre stop

With adjustment facility for band saw blades of different widths.

Technical data: 

220 - 240 V. 

Band speed adjustable from 180 - 330 m/min 

Projection 150 mm. 

Maximum height passage 80 mm. 

Work table 200 x 200 mm (can be swivelled from 0° - 45°).

Supplied accessories :

Band saw blade fine, steel and brass

Band saw blade wood

Band saw blade narrow, wood and NE metal

Cordless tin snips Bosch GSC 18 V-16

Plate shears for flexible cuts.

Compact design: 185 mm handle circumference and perfect weight distribution for easy handling

• Cutting capacity steel (800 N/mm²), max.0,7
• Cutting capacity steel (600 N/mm²), max.1 mm
• Cutting capacity steel (400 N/mm²), max.1.6 mm
• Cutting capacity aluminium (250 N/mm²), max.2 mm
• Idling stroke rate3,400 min-1
• Battery voltage18 V
• Minimum curve radius 15 mm

Supplied accessories :

• 2 rechargeable batteries
• Battery charger

Cross-cut and mitre saw

For clean and safe cutting to length of workpieces made of non-ferrous metal, plastic and wood.

Advantageous for mitre cuts: Not the saw head, but the rotary table (with clamped workpiece) is adjusted !

Technical data :

220 - 240 V. 

200 W. 50/60 Hz. 

6.000/min. 

Table 230 x 230 mm. 

Weight 6 kg. 

Cutting capacity at 90 degrees:

thickness x width

10 x 65 mm

18 x 50 mm

21 x 40 mm

25 x 25 mm

Supplied accessories :

HM Saw blade 80mm

Battery impact wrench Bosch GDS 18 V-LI HT

• High torque (650 Nm) for hard screw applications in metal (M 12 - M 20) and concrete
• Idling speed 0-1,900 rpm
• Torque, max.650 Nm
• Beat rate 0-2,100 bpm
• Battery voltage 18 V
• Tool holder 1/2" external square

Supplied accessories :

• Socket wrench inserts 77mm long SW 10 - 27 mm
• 10,11,13,17,19,21,22,24,27 mm

For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing.

High true running accuracy

Technical data:

5.000 - 20.000 per minute

Power consumption maximum 100 W.

Voltage 220 - 240 V.

Sturdy gear head made of die-cast aluminium.

Main housing: glass fibre reinforced POLYAMIDE.

Length 230 mm

Weight 500 g

Protective insulation according to class 2

With 20 mm MICROMOT system fitting at the front for use in drilling and horizontal stands.

Supplied accessories :

6 steel collets from 1,0 - 3,2 mm

different tools

Flexible shaft

Belt grinder BS/E

Compact, high-torque, robust and versatile.

For grinding out small openings, regrinding of shapes, surfaces, radii, grinding of grooves, deburring and gripping of precision parts.

Stepless speed control

Grinding arm can be swivelled by up to 60°.

220 - 240 V.

100 W. 

Sanding belt 10 x 330 mm (available sanding surface 10 x 110mm). 

Length 350 mm. 

Weight 650 g. 

Insulated according to class 2.

Supplied accessories :

Sanding belts K 80

Sanding belts K 180

For surface treatment of lacquer, wood, metal and natural stone.

Well-balanced machine with a 90° arrangement of handle and additional handle for optimum guidance.

Also suitable for polishing sensitive paintwork due to low speed.

With soft start and constant electronics.

With velcro disc 165 mm.

Scope of delivery :

• Sanding disc 165mm Velcro
• Polishing hood 180mm velcro

Plate shears for simple, clean cuts.

Slim housing for excellent handling.

Double cutting edge reduces deformation of the workpiece to a minimum.

Cutting gap adjustable to different material thicknesses to reduce burr formation.

• Cutting capacity 200 N/mm² 2.5 mm
• Cutting capacity 400 N/mm² 1.6 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries

Powerful angle grinder with 230 mm disc diameter.

Optimum handling due to low weight. Vibration control main and additional handle reduces vibrations by up to 50 % for fatigue-free work.

Scope of delivery:

• Mounting flange
• clamping nut
• protective hood
• two-hole wrench
• Additional handle Vibration Control

Supplied consumables:

• Cutting disc Ø 230 mm for metal
• Diamond saw blade Ø 230 mm for concrete 

Tape file Metabo BFE 9-20

Powerful, compact belt file for grinding, satin finishing and deburring in hard-to-reach areas.

Grinding attachment can be swivelled 270° without tools for perfect adjustment to any working position.

Tool-free abrasive belt change and adjustable belt guide.

Technical data :

• Nominal power input 950 W
• Output power 510 W
• Belt speed idle 9 - 20 m/s
• Sanding belt width 6 - 19 mm
• Sanding belt length 457 mm
• Working length of sanding belt arm 90 mm
• Cable length 4 m

Supplied accessories :

• Abrasive belts Zirkon 6x457mm K.60
• Abrasive belts Zirkon 6x457mm K.120
• Abrasive belts zircon 19x457mm K.60
• Abrasive belts Zirkon 19x457mm K.120
• Fleece tapes 6x457mm medium
• Fleece tapes 19x457 medium

Disc sander

For finest grinding work and smallest material corrections.

Adjustable grinding speed from 250 - 800 m/min.

For all types of wood, steel, non-ferrous metal, precious metal, plastic (also Plexiglas and GFK)

Technical data:

220 - 240 volts,

 Drive via Optibelt toothed belt (reduction ratio 7.3:1). Electronically adjustable grinding speed from approx. 250 - 750 m/min. 

Grinding disc Ø 250 mm, 

max. grinding height 135 mm. 

Table 275 x 105 mm (adjustable by 45° downwards, 15° upwards). 

Supplied accessories :

disc grinding wheels K80, K150, K240

Light and handy pendulum jigsaw with 3-fold pendulum stroke adjustment plus neutral position.

• Cooling air blows the interface free.
• Die-cast aluminium base plate swivels 45° on both sides.
• Electronically adjustable number of strokes.
• Tool-free saw blade change.
• With double LED.
• Cutting capacity in wood 135 mm , in steel 10 mm.

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Slide shoe plastic
• suction socket
• Saw blades for wood and metal

Very light and handy rechargeable Recipro saw.

Very fast sawing progress.

Adjustable guide shoe for optimal use of the saw blade.

Ideal for sawing wood, gypsum boards, metal (pipes and profiles) and even stones such as aerated concrete and sand-lime bricks.

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Saw blades for wood or metal

Handy battery nibbler for cutting sheet metal, corrugated sheet metal and trapezoidal sheet metal.

Infinitely adjustable die can be rotated 360° with 90° locking.

Slim design

Cutting capacity 200 N/mm² 2.5 mm

Cutting capacity 400 N/mm² 1.6 mm

Cutting capacity 600 N/mm² 1.2 mm

Cutting capacity 800 N/mm² 0.8 mm

Smallest cutting radius 50 mm

Cutting track width 5 mm

Immersion diameter 22 mm

The engraving machine is ideal for decorating and processing soft materials such as glass, wood or non-ferrous metals.

Supplied accessories :

Diamond grinding pencil 1,0mm

Diamond mounted point 1,8mm

Mounted point silicon carbide

mounted point aluminium oxide ball

mounted point aluminium oxide cylindrical