Handy battery angle drill .

Only 93 mm from the top of the gear head to the tip of the drill chuck.

With bright LED.

Electronically adjustable speed

right/left run

Drilling capacity in wood 25 mm

Drilling capacity in steel 10 mm

Drill chuck clamping width 1.5 - 10 mm

Scope of delivery :

Transport case

charger

2 batteries

drill chuck key

Diamond dry core drill Ø 81mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

High-performance SDS-max hammer drill for heavy-duty chiselling work.

This hammer drill is suitable for drilling up to a diameter of 52 mm as well as for heavy chiselling work in concrete and stone.

It features constant speed, restart protection, overload clutch, speed preselection and vibration control for effortless operation in continuous and time-consuming applications.

• Drill-Ø in concrete with hollow core bits
• up to max.150 mm
• Drill-Ø concrete 12 - 52 mm
• Impact energy 19 J

Scope of delivery: 

• Additional handle

Supplied consumables: 

• 1 x pointed chisel
• 1 x flat chisel
• 1 x spade chisel
• 1x Fettube

Diamond can countersink 82mm for e.g. junction boxes, can be used in: Masonry sand-lime brick Poroton and similar abrasive materials Use without impact, absolutely pre-drill (6mm). Centring drill is only used for guiding when setting up, then removing. and finish drilling without centring drill.

Scope of delivery :

• 82mm socket drill bit
• Center drill 6,5mm
• drift wedge
• Recording 6-kt.
• Recording SDS-Plus

Diamond dry core drill Ø 61mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Tool case Proxxon

Handy universal tool case, also ideal for cars

- 14-piece combination wrench set from 6 - 19 mm

- 14 Sockets 1/2" size 8 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 and 24 mm

- Switch ratchet

- Cardan joint

- Extension 125 and 250 mm (the latter with sliding piece and 1/2" square for use as a T-handle for wheel nuts)

- Spark plug special inserts 16, 18 and 21 mm

- FLEX-DOT screwdriver set: slotted screwdriver sizes 3.0, 5.5 and 8.0 mm. Cross-recess screwdriver (PH) size 1 and 2

- Pocket wrench set, 8 pieces, for hexagon socket screws (HX 1.5 - 8.0 mm) and for TX screws (TX 9 - 40)

- Car light tester with cable and crocodile clip (for car electrical system)

- Knipex-combination pliers 180 mm

- Knipex water pump pliers 240 mm

- Engineer's hammer (300 g), ground and partially polished on all sides. With non-detachable graphite handle (glass fibre reinforced, non-slip soft component in the grip area) for unsurpassed vibration damping 

With the diamond drilling machine you can drill perfect holes in masonry and sand-lime brick using the dry drilling method.

• Connection thread R 1/2" + 1 1/4" UNC
• Voltage (V/Hz) 230/50~60
• Speed (min-1) Load: 600/ 960/ 2780
• Engine power 2 KW
• Must be used in combination with a vacuum cleaner.
• We recommend the use of the drill stand for the drilling process!

Dry core drills usable length 300mm in 61,81,111,131,151,161 mm

drill rig

and suitable vacuum cleaner can be rented separately.

Scope of delivery :

• Drilling motor in transport case
• centering aid

For precision engineering, laboratory and workshop.

Practical height adjustment via gear rack with smooth-running crank.

Technical data :

220 - 240 Volt

Spindle speeds: 1,080 - 2,400 and 4,500/min

quill stroke 63 mm

height adjustment via crank 70 mm

Drilling capacity in steel 10 mm 

Throat 140 mm

Usable table area 200 x 200 mm

column 45 x 500 mm

Tool holding up to 10 mm by means of a gear rim drill chuck 

Weight approx. 10 kg

Supplied accessories :

Machine vice Primus 100

Fastening set for vice

Powerful 830 Watt hammer drill with SDS-plus and quick-change drill chuck for universal applications. A fast all-rounder for daily use on the construction site or around the house.

• Drill-Ø in concrete with hollow core bits max. 68 mm
• Drill-Ø concrete 4 - 26 mm
• Drill-Ø metal max. 13 mm
• Drill-Ø wood max. 30 mm Impact energy 2.7 J (Ideal for e.g. chiselling tiles, chiselling cable slots etc.)

Scope of delivery:

• Quick-change drill chuck
• Exchangeable chuck SDS-plus
• depth stop
• additional handle

Supplied consumables:

• SDS-plus drill bit set Ø 6/8/10 mm 
• SDS-plus pointed chisel
• SDS-plus flat chisel
• SDS-plus tile chisel
• Chisel grease

Diamond dry core drill Ø 111mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Powerful impact hammer with very high stock removal rate.

The specialist for breakthroughs and demolition work.

With anti-vibration technology AVT

Electronic impact number and impact strength adjustment

• Power consumption 1,510 watts
• Single impact strength 18.6 joules
• Weight 10.8 kg
• Tool taper SDS-Max

Scope of delivery :

• Transport case
• U-shaped handle
• Flat + pointed chisel
• chisel grease

Handy, powerful rechargeable battery screwdriver .

The ideal helper for interior work !

Technical data :

• torque, max. (hard/soft)25 / 5 Nm
• Idle speed0 - 4,200 min-1
• Battery voltage18 V
• tool holder1/4" hexagon socket
• Screw-Ø, max.4.2 mm
• Weight approx. 1,6 kg

Supplied accessories:

• 2 rechargeable batteries
• Battery charger
• Bit PH 2

Powerful rechargeable percussion drill !

Technical data :

• Torque (soft/hard/max.) 47/85/- Nm
• Idle speed (1st gear / 2nd gear) 0 - 480 / 0 - 2,100 rpm
• Stroke rate, max. 31,500 min-1
• Drill chuck clamping range, min./max. 1.5 / 13 mm
• Battery voltage 18 V Torque steps 25 + 1

Drill diameter :

• drill-Ø wood, max. 82 mm
• Drill-Ø Steel, max. 13 mm
• Drill-Ø Masonry, max. 16 mm

Supplied accessories :

• 2 batteries
• Battery charger
• Bitset
• Multi-purpose drill set
• Wood drill set

Rechargeable battery-powered angle drill Bosch GWB 12V - 10

The compact solution for hard to reach places.

Extremely versatile thanks to 5 adjustable head positions: 0°/22.5°/45°/67.5°/90

Very compact: shortest (only 11 cm) adjustable head with 10-mm Auto-Lock drill chuck

High speed from 0-1300 min-1 for fast work progress - optimal for drilling

• Torque (soft/hard/max.)3/11/- Nm
• Battery voltage 12 V

Drill diameter :

• Drill-Ø wood, max.10 mm

Screw diameter :

• Screw-Ø, max.6 mm

Supplied accessories :

• 2 rechargeable batteries
• Battery charger

Battery impact wrench Bosch GDS 18 V-LI HT

• High torque (650 Nm) for hard screw applications in metal (M 12 - M 20) and concrete
• Idling speed 0-1,900 rpm
• Torque, max.650 Nm
• Beat rate 0-2,100 bpm
• Battery voltage 18 V
• Tool holder 1/2" external square

Supplied accessories :

• Socket wrench inserts 77mm long SW 10 - 27 mm
• 10,11,13,17,19,21,22,24,27 mm

Powerful SDS-max impact hammer with very high stock removal rate.

The specialist for breakthroughs and demolition work.

Extreme impact force with 16.8 Joule for high stock removal rate

Low vibration during operation and idling. 

Scope of delivery:

• Additional handle

Supplied consumables:

• flat chisel
• pointed chisel
• spade chisel
• fettube

Handy caulking hammer with high stock removal rate.

With AVT anti-vibration technology

Vibration-damped handle.

SoftNoLoad for less vibration and precise chisel positioning.

• Power consumption 1110 Watt
• single impact strength 8.1 Joule
• Weight 5.6 kg
• Tool taper SDS-Max

Scope of delivery :

• Transport case
• handle
• Flat + pointed chisel
• chisel grease

Powerful impact wrench with very high torque of 440 Nm.

Short design of only 266 mm.

Practical, large-surface right/left rotation switch.

Separately switchable bright LED.

Tool holder 1/2"

Scope of delivery :

• Transport case
• 2 batteries
• charger
• Socket wrench (nut) 8,10,13,16,17,18,19,21,24 mm

Heavy-duty caulking hammer for tearing open e.g. road surfaces, foundations and demolition of concrete piers.

• Power consumption 1,240 Watt
• single impact 29,5 Joule
• Tool holder 30mm Makita

Scope of delivery :

• Pointed chisel 400mm
• Flat chisel 400mm
• chisel grease

High-performance demolition hammer with 28 mm hexagon socket for demolition work in concrete and stone.

• 62 Joule impact energy for maximum demolition performance.

Scope of delivery:

• Transport trolley for GSH 27

Supplied consumables:

• Pointed chisel
• flat chisel

Lightweight SDS-plus hammer for comfortable continuous use. This power tool is suitable for chiselling in concrete, masonry, wood and tiles.

• Impact energy 2.6 J

Scope of delivery:

• Additional handle

Supplied consumables:

• Pointed chisel
• tile chisel
• flat chisel
• fettube

Hand drill for drilling 150 mm diameter earth holes.

• For planting flowers and perennials.
• Also suitable for aerating the soil and compost as well as for setting medium-sized fence posts.
• Length approx. 111cm

SDS-max hammer drill for comfortable handling in time-consuming applications.

Fast drilling progress and high removal rate.

Vibration control and low weight allow effortless operation in continuous and time-consuming applications.

• Drill-Ø in concrete with hollow core bits 40 - 90 mm
• Drill-Ø concrete 12 - 40 mm
• Impact energy 8.8 J

Scope of delivery:

• Additional handle

Supplied consumables:

• pointed chisels
• flat chisels 
• fettube 
• drill 18mm
• drill 30mm

Diamond dry core drill Ø 131mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

The Bosch SDS max impact hammer for convenient handling in time-consuming applications

Vibration control and light weight allow effortless operation in continuous and time consuming applications

The powerful motor delivers 8.3 joules of impact energy for high stock removal

Technical data :

• Rated input power1.150
• Impact energy 2 - 8.3 J
• Stroke rate at nominal speed 1,300 - 2,900 bpm
• Tool holder SDS max
• Voltage, electrical230 V

Supplied accessories :

• Spatula Chisel
• Flat chisels
• Grease

 Powerful 18 Volt SDS-plus battery-powered hammer drill with optimum power-to-weight ratio.

• Drill-Ø in concrete 4 - 26 mm
• Impact energy 2.6 J

Scope of delivery:

• Additional handle
• depth stop
• Quick charger
• 2 x Battery

Supplied consumables:

• SDS-plus drill bit set Ø 6,8,10 mm
• Flat chisel
• Pointed chisel
• Tile chisel

The GBH 4-32 DFR Professional is the most powerful SDS plus hammer drill.

This power tool is suitable for drilling and chiselling in concrete, masonry, wood and metal.

Technical data:

• Rated input power 900 W
• Impact energy 4.2 J
• Stroke rate at nominal speed 0 - 3,600 bpm
• Rated speed 0 - 800 min-1
• Weight 4,7 kg
• Tool holder SDS-plus
• Voltage, 230 V

Drilling range :

• drill-Ø concrete, hammer drill 6 - 32 mm
• Max. drill-Ø masonry, drill bits90 mm
• Max. Drill diameter in metal 13 mm
• Max. drill-Ø wood 32 mm

Scope of delivery :

• Drill chuck SDS-Plus
• Drill chuck (3 jaws)
• SDS drill set 6,8,10mm
• SDS Pointed chisel
• SDS flat chisel
• SDS Tile chisel
• Fat tube 

Powerful hammer drill for drilling stone and concrete.

Ideal for drilling up to 32 mm and light chiselling work.

With additional vibration damping in the handle.

• Power consumption 850 Watt
• single impact strength 4.9 Joule
• Drilling capacity drill bit 90 mm
• Tool taper SDS-Plus

Scope of delivery :

• Transport case
• SDS PLus drill 20 + 25mm 400mm working length
• Flat and pointed chisel
• chisel grease

Handy, powerful 18 volt cordless impact drill with switchable percussion mechanism.

Ideal for most applications.

• Torque adjustable in 16 steps.
• Maximum torque 45Nm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• bit set
• Multi-purpose drill set 4,5,6,8,10,12mm
• Wood twist drill set 3,4,5,6,7,8,9,10mm

For optimal guidance of the Cedima core drilling unit C-BMH-160

• Guide rail made of aluminium profile
• Carrying handle for easy transport
• Feed slide: roller guide with eccentric adjustment
• Double support of the column to the rear
• Column infinitely adjustable up to 45
• stable dowel base with integrated adjustment screws
• Slide lockable
• Quick coupling enables quick and easy assembly/disassembly of the drill motor on the drill stand
• 
  
• Dowel and screw-in tool for fixing the drill rig are included with .

Versatile drill screwdriver

FlexiClick System: easy to change accessories for up to 8 combinations.

Technical data :

• Torque (soft/hard/max.)20/35/- Nm
• Idle speed (1st gear / 2nd gear)0 - 460 / 0 - 1,750 rpm
• Battery type : Lithium-ion
• Drill chuck clamping range, min./max.0.8 / 10 mm
• Battery voltage12 V
• Weight excl. battery 0,59 kg
• Torque steps 20+1

Drill diameter:

• drill-Ø wood, max.32 mm
• Drill-Ø Steel, max.10 mm
• Screw diameter:
• Screw-Ø, max.8 mm

Supplied accessories :

• 2 rechargeable batteries
• Battery charger
• Drill Chuck Attachment
• Bit holder attachment
• Angle attachment
• Eccentric attachment

For drilling, hammer drilling and chiselling.

• With quick-change drill chuck for cylindrical drills.
• Single impact strength 2.0 Joule
• Drilling capacity in concrete 24 mm
• Drilling capacity in wood 27 mm
• Drilling capacity in steel 13 mm
• Tool holder SDS Plus

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Quick-change chuck SDS
• quick-change chuck
• handle
• depth stop
• Flat chisel , Pointed chisel , Spade chisel
• concrete drill
• 6 100/165 mm
• 8 100/165 mm
• 10 100/165 mm

Powerful hammer drill for drilling stone and concrete.

• Ideal for drilling up to 28 mm and light chiselling work.
• With additional vibration damping by spring-mounted handle.
• Power consumption 800 Watt
• single impact strength 2.8 Joule
• Drill power Drill bit 80 mm
• Tool taper SDS-Plus
• Electronically adjustable number of revolutions and impacts With bright LED

Scope of delivery :

• Transport case
• quick-change chuck
• SDS quick-change chuck
• Flat, pointed and tile chisel
• chisel grease

The percussion drill drills effortlessly through wood, metal and stone.

• Power consumption 1.010 Watt
• Clamping neck 43mm
• Drilling capacity in wood 40 mm
• Drilling capacity in steel 16 mm
• Drilling capacity in masonry 20 mm
• Drill chuck clamping width 1.5 - 13 mm
• With constant electronics and bright LED

Scope of delivery :

• Transport case
• Handle with depth stop
• Universal drill 4,5,6,8,10,12mm

Ideal for mounting plasterboards on wood and metal constructions.

Idle speed 0-4.000 min

Scope of delivery :

• Transport case
• 2 batteries
• charger
• Bit PH 2

1300 watt high torque impact drill for the heaviest applications with high diameters (drilling, working with hollow core bits and hole saws) as well as screwing and stirring. Constant-Electronic for more comfortable working, keeps speed constant even under load. Torque control for high precision: Torque preselection for even screw insertion. 

Scope of delivery:

• Quick-action drill chuck
• depth stop
• additional handle

Supplied consumables:

• Multi-purpose drill set 8 pieces, Ø 3.0 - 8.0 mm

Demolition hammer with 30 mm hexagon socket for demolition work in concrete and stone.

The powerful motor delivers 41 joules of impact energy for outstanding removal performance.

Scope of delivery:

• Additional handle

Supplied consumables:

• Pointed chisel
• flat chisel
• fettube

Diamond socket countersink 68mm for e.g. sockets, can be used in: Masonry sand-lime brick Poroton and similar abrasive materials.

• Use without impact, absolutely pre-drill (6mm).
• Centring drill is only used for guiding when setting up, then removing. and finish drilling without centring drill.

Scope of delivery :

• 68mm socket drill bit
• Center drill 6,5mm
• drift wedge
• Recording 6-kt.
• Recording SDS-Plus

Diamond dry core drill Ø 161mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 151mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks