Tool case Proxxon

Handy universal tool case, also ideal for cars

- 14-piece combination wrench set from 6 - 19 mm

- 14 Sockets 1/2" size 8 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 and 24 mm

- Switch ratchet

- Cardan joint

- Extension 125 and 250 mm (the latter with sliding piece and 1/2" square for use as a T-handle for wheel nuts)

- Spark plug special inserts 16, 18 and 21 mm

- FLEX-DOT screwdriver set: slotted screwdriver sizes 3.0, 5.5 and 8.0 mm. Cross-recess screwdriver (PH) size 1 and 2

- Pocket wrench set, 8 pieces, for hexagon socket screws (HX 1.5 - 8.0 mm) and for TX screws (TX 9 - 40)

- Car light tester with cable and crocodile clip (for car electrical system)

- Knipex-combination pliers 180 mm

- Knipex water pump pliers 240 mm

- Engineer's hammer (300 g), ground and partially polished on all sides. With non-detachable graphite handle (glass fibre reinforced, non-slip soft component in the grip area) for unsurpassed vibration damping 

Sheet punch is perfect for clean and burr-free punching of plastics and steel sheets.

For a good punching result, this sheet metal punch has 3 cutting tips.

Ideal e.g. for mounting a sink tap (water tap).

• Pre-drill approx. 8.5 mm for pull screw.

With the stand tap wrench you can move nuts in places that are difficult to access, e.g. on a sink fitting.

The swivelling cross handle allows an optimal power transmission.

Moisture meter Gann Hydromette Compact S

• The Compact S is an electronic wood moisture meter for wood fuels with mean value calibration for soft and hard wood and a large 3-digit LCD display.
• The measuring tips attached to the top of the instrument allow moisture measurements in wood up to 30 mm thick.

for environmental protection due to lower emissions

to protect the stove and fireplace by improving combustion

for saving through a higher energy yield, because the wood is burned in the optimal moisture condition

Handy quick moisture meter in pocket size for single or series measurements

separate electrodes or cables required

Power supply:

• 9 V block battery

Moisture meter Gann Hydromette Compact B

The Compact B is an electronic building moisture indicator with non-destructive measuring method according to the dielectric constant/high frequency measuring principle.

With LCD display and flexibly applicable ball probe for detecting moisture in building materials of all kinds and for detecting the distribution of moisture in walls, ceilings and screeds and other set building materials.

Especially suitable for parquet and tile layers .

Handy quick moisture indicator in pocket size for lightning fast single or series measurements

Power supply:

• 9 V block battery

Building moisture:

• 0 - 100 digits Scan range

The ROSCOPE® pipe camera from ROTHENBERGER combines inspection and location in one device, is versatile and covers almost all inspection techniques within living and working spaces.

• The 25/16 module is ideal for inspecting pipes with a diameter of 50 to 100 mm.
• The Ø 25 mm camera head with self-aligning image is extremely flexible for 90° bends from Ø 50 mm pipes.

Operating environment:

• Temperature 0°C to 40°C
• Humidity Maximum of 95% non-condensing (display unit)
• Storage temperature -20°C to 60°C
• Water resistance Camera head and cable up to 16 m (52.5')
• Water depth Cable length 16 m

Assembly pliers for the professional for the processing of HM cavity wall plugs.

• Also suitable as a setting tool for hollow wall plugs with hexagon head screw.

Simple, fast freezing of undrained pipes Ø ¼ - 1¼" or 15 - 42 mm.

Closed refrigerant circuit. 

For steel, copper, plastic, composite pipes.

One-piece freezing heads for core working range Ø ¼ - 1" or Ø 15 - 35 mm, no reducing inserts required.

Very narrow freezing heads , only 50mm wide.

Support of cold transfer only by spraying with water.

• Cooling unit 230 V, 50 Hz, 430 W

Scope of delivery :

• 2 refrigerant hoses 2.5 m long
• 2 tension straps
• 2 LCD digital thermometers
• Spray bottle
• Equipment for Ø ¼ - 1¼", 15 - 42 mm

Practical electronics tool assortment for the handyman or do-it-yourselfer.

Consisting of :

• Bricklayer's chisel 250x16 mm
• Electrician's chisel 4kt. 250x10x7 mm
• Locksmith's hammer 500 g
• Open-ended spanner adjustable 0 - 25 mm
• Water pump pliers 250 mm
• Automatic wire stripper 
• Multiple pliers 180 mm
• VDE Side cutters 160 mm
• VDE Flat round nose pliers 200 mm
• VDE Flat round nose pliers angled 200 mm
• VDE Wire strippers 160 mm
• VDE Cable shears 200 mm
• Universal cable knife blade length 50 mm
• Electrical insulating tape black
• Spatula 60 mm
• Offset screwdriver set hex SW 1,3 , 1,5 ,2 , 2,5 , 3 , 4 ,5 ,6 ,8 ,10 mm
• VDE Screwdriver slotted 0.4x2.5 0.8x4.0 1.0x5.5 1.2x6.5 mm
• VDE Screwdriver cross slot PH 0 , 1 , 2
• Voltage tester slot 220-250V 3 mm
• Voltage tester Duspol expert 12 - 1000 Volt
• Electrical cabinet spanner
• Wooden ruler 2 m

Bicycle repair kit 

Helper for various jobs around your bike, e.g. brake discs or saddle assembly and much more.

Set consists of :

• Torque spanner 1/4" 2,5 - 25 Nm
• Cardan extension 1/4" | 97 mm
• Enlargement piece 1/4" to 3/8
• Socket 10 + 15 mm
• Bit adapter 1/4" hex x 1/4" square
• Hexagon socket bits 2 2,5 3 4 5 6 8 10
• Phillips bit PH1
• Slotted bit 4
• TX bits T15 T20 T25 T30
• 6" adjustable spanner
• Bag

The powerful professional tool for the building trade.

For panel thicknesses up to 230 mm, with electronic power controller, for optimum adjustment of the cutting temperature.

Scope of delivery: 

• Transport case
• hexagonal wrench
• cleaning brush

Handy, oil-free 2 cylinder piston compressor with V unit.

• Suitable for continuous operation due to patented intake air cooling.
• Ideal for use on construction sites due to its small dimensions.
• Low speed with 1400 min-1, therefore very durable.
• Internal pressure gauge and precise discharge pressure regulation from 0 - 10 bar.
• Special, slow-running, oil-free unit ensures a pleasant noise level of 72 dB.
• Ideal for operation in living rooms and workshops.

 Scope of delivery: 

• Spiral hose
• Tyre filler
• Blow-out gun

Thermal imaging camera Bosch GTC 400 C

Immediate visualization of temperature differences with intelligent documentation

Fast data exchange and easy documentation of thermal images via the Bosch Measuring Master App

With picture-in-picture technology, thermal and real images are superimposed to make the localization of the measurement more clearly visible.

Technical data :

• Measuring range 10 °C to +400 °C
• Measuring accuracy IR±3.0 °C
• Resolution0.1 °C
• Thermal sensitivity (NETD)<50 mK
• Size IR sensor160x120 px
• Number of measuring points19,200
• Image memory (number of images)500
• Internal memory type memory
• File format image.jpg
• Data transmissionMicroUSB, WLAN
• Dust and splash water protectionIP 53
• Weight0,54 kg
• supported Android devices
• Smartphone from Android 4.3,
• Tablet as of Android 4.3
• supported iOS devices
• iPad (3rd gen. and above), iPad Air (1st gen. and above), iPad mini (1st gen. and above), iPhone 4S and above
• Display typeTFT LCD
• Size Display3.5".
• Operating temperature-10 - 45°C
• Storage temperature-20 - 70°C
• Target distance, minimum 0.3 m

Vacuum suction lifter up to 120 kg 

Wheel mounting set , ideal for manual tyre change.

Set consists of :

• 1/2" 2K telescopic ratchet 460-600 mm 
• 1/2" socket extension 75 mm + 125 mm 
• 1/2" hexagonal socket wrenches with protective sleeve 17mm + 19mm 
• Tyre tread depth gauge red/black 
• Magnet tray 
• white tyre marking chalk 
• Wheel bolt bag red/black 
• Torque spanner 1/2" 40 - 200 Nm

Gently and precisely fixes and supports door linings when foaming the wall joint.

• Telescopic anodised aluminium 4-sided tube with mm scale and locking screw for accurate work.
• Cross-shaped pressure plate with felt protection for sensitive door chucks with a depth of 6 to 13 cm or 13 to 30 cm.
• Reversible clamping brackets with enlarged clamping surfaces and removable brackets for safe and easy insertion of the door chuck.

Scope of delivery :

• 3 Door chuck clamps TU
• 4 Door chucks Directional clamps TFM-2K
• 1 carrier bag 

The compact 18V battery cartridge press - for cartridges up to 310 ml capacity.

• Speed preselection with 9 speed settings and trigger for variable speed easy regulation of the material flow
• Thanks to 3.5 kN pressure force and a maximum feed rate of 8 mm/s, fast working progress even with viscous adhesives
• Thanks to the automatic reverse function, the pressure on the plunger rod is stopped when the trigger is released, preventing dripping or leaking of the material

Included accessories :

• 2 rechargeable batteries
• Charger

Battery lamp with frame for best lighting conditions at any time of day.

• Max. brightness: 1900 lumen
• On/Off switch: incl. dimmer function in 2 steps
• Dimensions (L x W x H): 72 x 187 x 292 mm
• Low weight of 1.6 KG

Scope of delivery: 

• Transport case
• 2 batteries
• charger
• LBoxx 

Bicycle Universal Repair Kit 

Consisting of :

• Tyre lever set 3 pieces
• Roller fork spanner 0 - 24 mm 
• Flat nose pliers 160 mm
• Side cutter 160 mm
• Bits Allen 2, 2,5 ,3 , 4 ,5 ,6 ,8 ,10 mm
• Bit cross recess PH 1
• Bits Torx TX 15,20,25,30
• Socket 1/4" 10 mm
• Bit ratchet 1/4" 91 mm
• Drive adapter 1/4" hex. x 1/4" 4ct.
• Bit screwdriver 1/4" 118 mm
• Bit holder 1/4" 66.5 mm
• Nylon bag

Practical tool assortment for the handyman or do-it-yourselfer.

Consisting of :

• 1/4" reversible ratchet fine toothed 72 teeth 150 mm
• 1/4" square socket handle 165 mm
• 1/4" socket 4 , 4,5 , 5 , 5,5 , 6 , 7 ,8 ,9 ,10 ,11 ,12 ,13 mm
• 1/4" socket extension 50 + 100 mm
• 1/4" cross handle with slide 115 mm
• 1/4" universal joint 32 mm
• Bit adapter 1/4" 4kt x 1/4" 6kt  
• 1/4" bits Allen 3 ,4 ,5 ,6 , 8 , 10 mm
• 1/4" bits slotted 4 , 5,5 , 7 mm
• 1/4" bits cross recess PH 1 , 2 , 3 , 4
• 1/4" bits cross recess PZ 1 , 2 , 3
• 1/4" bits Torx TX 8 , 10 ,15 , 20 , 25 , 27 , 30 , 40
• 1/2" Reversible ratchet fine toothing 72 teeth 250 mm
• 1/2" socket 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,26,27,28,30,32 mm
• 1/2" socket extension 125 + 250 mm
• 1/2" universal joint 65 mm
• Enlargement/sliding piece 3/8" x 1/2
• Combination spanner SW 8,9,10,11,12,13,14,15,16,17,18,19
• Offset screwdriver set hexagon SW 1,5 ,2 , 2,5 , 3 , 4 ,5 ,6 ,8 ,10 mm
• Open-end spanner adjustable 0 - 30 mm
• Screwdriver slot 4 , 5,5 , 6,5 mm
• Screwdriver cross recess PH 1 ,2 ,3
• Side cutters 180 mm 
• Flat-nose pliers 200 mm
• Water pump pliers 250 mm
• Metalworker's hammer 500 g.

The preferred multi-detector in its class . Most objects are found and application errors avoided by automatic calibration .

Detection of even deep objects - up to 12 cm depth Even more reliable detection of objects due to three-colour LED illuminated ring.

Detectable materials :

• Ferrous metals
• Non-ferrous metals
• Wooden substructures
• live wires

Detection depth :

• Steel, max. 120 mm
• copper, max. 80 mm
• current-carrying cables, max. 50 mm
• Wooden substructures, max. 38 mm

The GLM 120 C - the first laser range finder from Bosch with integrated camera for exact measurements up to 120 meters Easy aiming of distant targets and digital viewfinder with four zoom levels Optimally suited for outdoor applications thanks to its scratch-resistant color display Easy documentation of the measurement results by transferring the data to the Measuring Master App via Bluetooth.

Scope of delivery :

• Laser range finder
• Micro-USB cable
• USB charger
• protective bag