Fast, clean heat from the socket, universally applicable in all rooms. 

Ideal for all rooms that need to be heated quickly and easily.

• Nominal heat load max. : 2,2 KW
• Switchable heating power : 1 x 2,2 KW
• Air capacity: 250 m³/h
• supply::230/1~/50 V/Hz
• Rated current max.: 9.5 A

Simple, fast freezing of undrained pipes Ø ¼ - 1¼" or 15 - 42 mm.

Closed refrigerant circuit. 

For steel, copper, plastic, composite pipes.

One-piece freezing heads for core working range Ø ¼ - 1" or Ø 15 - 35 mm, no reducing inserts required.

Very narrow freezing heads , only 50mm wide.

Support of cold transfer only by spraying with water.

• Cooling unit 230 V, 50 Hz, 430 W

Scope of delivery :

• 2 refrigerant hoses 2.5 m long
• 2 tension straps
• 2 LCD digital thermometers
• Spray bottle
• Equipment for Ø ¼ - 1¼", 15 - 42 mm

Fast, clean heat from the socket, can be used universally in all rooms, as no combustion air supply is required and no exhaust gases are produced. 

Ideal for all rooms that need to be heated quickly and easily.

Technical data: 

• Nominal heat output: 9 kilowatts
• Switchable heat output: 2 x 4.5 kilowatts
• Air volume flow: 600 cubic metres per hour
• Power supply: 400 volts
• Weight: 14.7 kg 

The transportable REMKO electric heaters are robust, safe and reliable.

The heating power of up to10.5 kW is adjustable in three stages.

No power losses, the entire current is converted into heat.

Due to the low weight and compact design, the units can be used universally. 

Technical data: 

• Nominal heat output: 10.5 kW
• Switchable heat output: 3 x 3.5 kW 
• Air flow rate: 750 sqm/h
• Power supply: 400 volts
• Weight: 20 kg 

The transportable REMKO electric heaters are robust, safe and reliable. 

The heating power of up to 18 kW is adjustable in three stages. No power losses, the entire current is converted into heat. 

Due to the low weight and compact design, the units can be used universally.

Technical data: 

• Nominal heat output: 18 kilowatts
• Switchable heat output: 3 x 6 kilowatts
• Air volume flow: 1000 qm3/h
• Power supply: 400 volts
• Weight: 27.4 kg

For drying newly built flats or after water damage.

The Profil 60 dehumidifier dries quickly and economically at the touch of a button, preventing or eliminating damp walls, musty smells and mould.

The use of a dehumidifier is recommended to avoid moisture damage and cost-intensive work interruptions.

Please note : Building dryer is not a heating appliance !

Technical data :

• Daily dehumidification capacity max. 62 l/d
• Air volume flow max. 465 m³/h
• Condensate tank capacity 10 l
• Operating temperature range 3-32 °C
• Power supply 230 V
• Power consumption max. 0.76KW

Robust cable drum with 3-way protective contact sockets

• splash-proof
• 40m 3x2,5mm²
• 230 Volt
• H07RN-F

Extension cable

25 m 3 x 2.5mm²

230 Volt

H07RN-F

Extension cable

50 m 3 x 2.5mm²

230 Volt

H07RN-F

400 V extension cable

25 m 5 x 2,5mm² with CEE plug

H07RN-F

16 A

400 V CEE Extension cable

50 m 5 x 2,5mm²

H07RN-F

16 A

For drying newly built flats or after water damage.

The Profil 60 dehumidifier dries quickly and economically at the touch of a button, preventing or eliminating damp walls, musty smells and mould.

The use of a dehumidifier is recommended to avoid moisture damage and cost-intensive work interruptions.

Please note : Building dryer is not a heating appliance !

Technical data :

• Daily dehumidification capacity max. 62 l/d
• Air volume flow max. 465 m³/h
• Condensate tank capacity 10 l
• Operating temperature range 3-32 °C
• Power supply 230 V
• Power consumption max. 0.76KW

Battery radial press with forced sequence for the production of press connections Ø 10-40mm, Ø 3/8 -1¼'. Rotatable press clamp holder with automatic locking. The automatic locking of the crimping pliers and the automatic return after completion of the crimping process (forced sequence) provide additional safety. With a weight of only 2.5kg and a length of only 31cm including the Mini V15 crimping tool, it can be used almost anywhere.

• Pressing pliers set V contour 15,18,22,28mm for e.g. copper press fittings you can rent separately from us.

Scope of delivery:

• Transport case
• 2 batteries
• charger

Press jaw set for drinking water and heating installation.

Contour V consisting of: 

Press jaw 15,18,22 and 28mm.

The powerful dehumidifier in compact design, can be used immediately and everywhere.

Fields of application e.g:

Living space

Cellar

Garage

Attic

Technical data :

• Daily dehumidification capacity max.30l/d
• Daily dehumidification capacity at 30°C and 80% r.h.28,4l/d
• Daily dehumidification capacity at 20°C and 70% r.h.15.2 l/d
• Daily dehumidification capacity at 15°C and 60% r.h.8.4 l/d
• Air volume flow max.190 m³/h
• Condensate receptacle filling capacity5.5 l
• Operating temperature range6-32 °C
• Operating humidity range40-100 % r.h.
• Power supply230/1~/50 V/Ph/Hz
• Power consumption max.0,65 kW
• Rated current consumption max.3,6A
• RefrigerantR410A
• refrigerant quantity0,18 kg
• Sound pressure level at 1m distance51 dB(A)
• Dimensions H/W/D615/390/275 mm
• Weight 16,0 kg

Thermal imaging camera Bosch GTC 400 C

Immediate visualization of temperature differences with intelligent documentation

Fast data exchange and easy documentation of thermal images via the Bosch Measuring Master App

With picture-in-picture technology, thermal and real images are superimposed to make the localization of the measurement more clearly visible.

Technical data :

• Measuring range 10 °C to +400 °C
• Measuring accuracy IR±3.0 °C
• Resolution0.1 °C
• Thermal sensitivity (NETD)<50 mK
• Size IR sensor160x120 px
• Number of measuring points19,200
• Image memory (number of images)500
• Internal memory type memory
• File format image.jpg
• Data transmissionMicroUSB, WLAN
• Dust and splash water protectionIP 53
• Weight0,54 kg
• supported Android devices
• Smartphone from Android 4.3,
• Tablet as of Android 4.3
• supported iOS devices
• iPad (3rd gen. and above), iPad Air (1st gen. and above), iPad mini (1st gen. and above), iPhone 4S and above
• Display typeTFT LCD
• Size Display3.5".
• Operating temperature-10 - 45°C
• Storage temperature-20 - 70°C
• Target distance, minimum 0.3 m

The hot air blower is suitable, for example, for removing old paint on wood, or for carefully removing stickers, etc.

Technical data :

• Rated input power 2.300 W
• Working temperature 50 - 650°C
• Air flow 150 - 500 l/min
• Stepless temperature control +
• Cold stage 50°C+
• Regulation, air flow infinitely variable