Sabre saw with powerful 18 Volt motor for a wide range of applications. Comfortable to handle. Thanks to variable cutting speed preselection, you can saw a wide variety of materials. The foot plate is adjustable to make full use of the saw blade.  

Scope of delivery: 

• Quick charger
• 2 x battery

Supplied consumables: 

• reciprocating saw blade S 922 BF
• Sabre saw blade S 1122 HF
• Sabre saw blade S 2345 X

Battery operated circular hand saw for all robust sawing work up to max. 57mm cutting depth.

An integrated LED ensures good visibility even in dark places.

Maximum performance due to powerful DC motor with optimized cutting speed. 

Scope of delivery:

• Quick charger
• 2 x Battery
• allen wrench

Supplied consumables:

• circular saw blade Optiline Wood

Battery operated jigsaw with powerful 18 Volt battery system. The maximum cutting depth in wood is 120 mm, in aluminium 20 mm and in metal 8 mm (depending on the saw blade). Bevel cuts from 0-45° possible, SDS saw blade change with only one hand.

Scope of delivery:

• Quick charger
• 2 battery

Supplied consumables:

• Jigsaw blades T101B wood
• Jigsaw blades T118B metal

Special battery-powered saw for the toughest applications. Ideal for sawing wood and poroton up to strength class 12 N/mm².

Durable, low-vibration and recoilless double saw blade system with quick saw blade stop within 3 seconds.

Reinforced sword for higher accuracy, more precise cuts and significantly longer service life.

• Saw blade length:430mm

Scope of delivery:

• 2 batterys 
• charger

Supplied consumables:

• special saw blade for cutting e.g. poroton, hollow bricks

36 volt battery-powered chainsaw with high cutting performance for use in noise-sensitive areas.

Cutting thick branches and light trunks is no problem with this tool.

• Cutting length 35 cm. 
• Battery life max. 42 min (depending on the application, the battery life may vary). 

Scope of delivery:

• 2 batteries
• Charger

Supplied consumables:

• Saw chain 
• Adhesive oil

Handy, light electric chainsaw for property maintenance and simple manual work in noise-sensitive areas.

• Cutting length 35 cm
• Power consumption 1.4 kW

Supplied consumables: 

• saw chain 
• adhesive oil

Powerful 125mm angle grinder for high work throughput thanks to powerful 1,300 watt motor with Constant-Electronic. User protection through KickBack Control, restart protection, torsion-proof protective hood and reduction of vibrations.

Scope of delivery: 

• Additional handle
• mounting flange
• clamping nut
• protective hood
• two-hole wrench

Supplied consumables:

• Cutting disc Ø 125 mm for metal 

1300 watt high torque impact drill for the heaviest applications with high diameters (drilling, working with hollow core bits and hole saws) as well as screwing and stirring. Constant-Electronic for more comfortable working, keeps speed constant even under load. Torque control for high precision: Torque preselection for even screw insertion. 

Scope of delivery:

• Quick-action drill chuck
• depth stop
• additional handle

Supplied consumables:

• Multi-purpose drill set 8 pieces, Ø 3.0 - 8.0 mm

Extremely handy belt grinder for removing, plane grinding, smoothing and cleaning on wood, plastic and metal.

• Sanding surface: 75mm wide

Scope of delivery:

• dust bag

Supplied consumables:

• sanding belt K40
• sanding belt K60
• sanding belt K80
• sanding belt K120

Powerful low-vibration random orbit sander for comfortable working. The eccentric movement plus rotation ensures the finest sanding with high sanding performance. Flexibility for every application thanks to the choice of 150 mm or 125 mm grinding disc diameter.

Scope of delivery:

• Hexagon socket wrench
• additional handle
• Grinding disc Ø 125 mm
• grinding disc Ø 150 mm 

Supplied consumables:

• Sanding belt for wood and paint K40
• Sanding belt for wood and paint K60
• Sanding belt for wood and paint K80
• Sanding belt for wood and paint K120

The wired plane is an all-round plane. Its powerful 710 watt motor delivers fast and accurate planing results. The planer also has an adjustable chip ejector on the left or right. In addition, the compact design offers convenient handling, making it possible to work even in places that are difficult to access. This power tool is suitable for planing wood.

• Planing knife width 82 mm
• Cutting depth up to 2.6 mm
• Fold depth adjustable up to 9 mm.

Scope of delivery:

• Allen key
• cloth dust bag
• rip fence

Supplied consumables:

• planing knife

The 850 Watt wired planer achieves an excellent surface quality. Ultrasonic knives and constant speed ensure excellent planing results and a high surface quality. In addition, the simple cutting depth adjustment enables fast and convenient working.

• Planing knife width 82 mm
• Cutting depth up to 4.0 mm
• Fold depth adjustable up to 24 mm.

Scope of delivery: 

• Dust bag
• rip fence
• rebate depth stop

Supplied consumables: 

• planing knife

Protractor for fast determination of mitre angles. Fast calculation and transfer of angles by memory function for frequently used angle dimensions Automatic calculation of single and double cross-cut and mitre angles without further aids.

• Side length 40 cm

Scope of delivery:

• Thigh extension

Supplied consumables: 

• 4 x 1.5 V-LR6 battery (AA)

Compact multi-line laser for all indoor applications. Up to four times better visibility thanks to green laser lines. High precision thanks to innovative CAL Guard monitoring and Bluetooth® connection to your smartphone for remote operation and contactless tool adjustment . High working efficiency thanks to 3 x 360° lines: horizontal and vertical levelling operations can be carried out simultaneously throughout the room with just one tool. Working area 30m. 

Scope of delivery:

• Universal bracket BM 1
• laser target
• tripod

Robust cable drum with 3-way protective contact sockets

• splash-proof
• 40m 3x2,5mm²
• 230 Volt
• H07RN-F

Extension cable

25 m 3 x 2.5mm²

230 Volt

H07RN-F

Extension cable

50 m 3 x 2.5mm²

230 Volt

H07RN-F

400 V extension cable

25 m 5 x 2,5mm² with CEE plug

H07RN-F

16 A

400 V CEE Extension cable

50 m 5 x 2,5mm²

H07RN-F

16 A

Sturdy, robust and easy to operate orbital sander, even for hours of grinding.

Sanding plate(l/b) : 101x113mm

Scope of delivery: 

• punching tool
• Dust box incl. microfilter
• Base plate with grinding plate

Supplied consumables 

• sanding sheet for wood and paint K80
• sanding sheet for wood and colour K120 

Robust, compact, one-handed multi orbital sander for corners, edges and surfaces. The simple sanding plate change offers the user highest flexibility.

Two different sanding plates are available: Delta sanding plate 100x150mm and sanding plate 80x130mm. 

Scope of delivery: 

• Screwdriver to change the sanding plate
• Dust box
• Delta sanding plate
• grinding plate 80x130mm

Supplied consumables: 

• Sanding sheet for wood and paint K40
• Sanding sheet for wood and paint K60
• Sanding sheet for wood and paint K80
• Sanding sheet for wood and paint K120

The comfortable precision router with digital display of the milling depth setting. Excellent tool guidance due to ergonomic handle design with different handle positions. Patented, high-precision fine adjustment in 1/10 mm increments and digital display of milling depth . Unique patented spindle lock for quick and easy cutter change. Scope of delivery: - Combination wrench 19mm - Rip fence with fine adjustment - Adapter for copy sleeve - Collet chuck with union nut 8 mm Consumables supplied: 14 pieces set of cutters, consisting of 1 piece each. Grooving cutter 8, 16, 20 mm Concave cutter 12, 21, 30 mm Quarter rod cutter 25, 33 mm Flush cutter 13 mm Burr cutter 14.3 mm Keyway cutter 14 mm Carving cutter 35 mm Folding cutter 25 mm Chamfer cutter 27 mm

Scope of delivery:

• open-end wrench 19mm
• Rip fence with fine adjustment
• Adapter for copy tubes
• Collet chuck with union nut 8 mm

Supplied consumables:

14 pieces cutter set, each consisting of 1 pc.

• Grooving end mills 8, 16, 20 mm
• Concave end mills 12, 21, 30 mm
• Quarter round end mills 25, 33 mm
• Flush end mills 13 mm
• Burr end mills 14.3 mm
• Keyway end mills 14 mm
• Carving end mills 35 mm
• Rebate end mills 25 mm
• Bevel end mills 27 mm

High-performance multifunctional tool.

Suitable for the toughest applications thanks to powerful 550 watt high-performance motor.

This power tool is suitable, for example, for removing windows, renovating expansion joints and cutting grooves in wooden frame constructions.

It can be used for wood, plastic and metal.

Practical snap-in function allows accessories to be changed in just 3 seconds without tools.

It is compatible with the Starlock, StarlockPlus and StarlockMax systems.

Supplied accessories :

• Transport case
• grinding plate
• sanding sheets
• extraction adapter
• HM 3 corner rasp
• HM segment saw blade
• Wood/metal segment saw blade
• plunge saw blade wood/metal 32mm
• plunge saw blade wood/metal 52mm

Handy lightweight 36 volt battery-powered chainsaw for property maintenance and simple manual work in noise-sensitive areas.              Cutting length 30 cm Battery life max. 45min (depending on application battery life may vary)

Scope of delivery:

• 2 batteries 
• charger

Supplied spray material

• saw chain

Universal tacker for professional upholstery, insulation and paneling with claws.

With long nose for precise work in hard-to-reach places.

Look-up function, impact force adjustment and clamp sight window.

The following staples and pens can be used:

• staples type 53 8-20mm
• staples type 53F 8-18mm (flat wire staples)
• pins type J 16-19mm

Supplied consumables :

• Fine wire staples type 53 11,3mm wide
• length 8 and 10mm

Single-disc machine for a wide range of applications.

For example, sanding and oiling wooden parquet floors, or cleaning exposed aggregate concrete slabs.

• Working width 420mm 
• Voltage 230 V 
• Input power 1800 Watt 
• Adjustable speed 57-171 rpm 

We also offer a suitable dust extraction system: Schwamborn STS 130

The GLM 120 C - the first laser range finder from Bosch with integrated camera for exact measurements up to 120 meters Easy aiming of distant targets and digital viewfinder with four zoom levels Optimally suited for outdoor applications thanks to its scratch-resistant color display Easy documentation of the measurement results by transferring the data to the Measuring Master App via Bluetooth.

Scope of delivery :

• Laser range finder
• Micro-USB cable
• USB charger
• protective bag

Ideal dust extraction for e.g. our single disc machine and diamond grinding machine.

Can be used anywhere where a normal vacuum cleaner is not sufficient.

Suitable for the construction industry with effective filter cleaning.

• Suction hose 5m
• mains voltage 230 V
• Power consumption 1.2 KW

A panel lift for easy mounting on walls and ceilings up to mounting heights of 3.80 m.

This lift is not only strong when used on site, but also when transported to the construction site.

• The lift is foldable to a handy transport size with a weight of only 24 kg.
• The removable plate cross beam weighs only 15 kg and can therefore be transported separately.
• In just a few minutes, the panel lift with its 4 wheels can be used for panels weighing up to 70 kg.
• The plate holder is variable up to max. 1.3 x 3.8 m.
• The mechanical cable winch is equipped with an automatic brake and a non-return device.
• Ideal for the efficient assembly of plasterboard, Fermacell panels, ceiling panels etc.
• The lift can be manoeuvred conditionally by the wheels.
• This allows a fine adjustment of the panels before fixing. -
• Only one employee can carry out the complete assembly for all panel sizes available on the market -
• Both horizontal and vertical panel assembly can be adjusted -
• Automatically adjusts to roof slopes -
• Manual winch with automatic brake (non-return device) -
• 4 wheels with brake and 2 transport wheels -
• The panel lift can be dismantled into 2 parts for transport purposes. -
• It can be transported in a car or a station wagon. -
• The DWM 380 is ready for operation within half a minute.

Gently and precisely fixes and supports door linings when foaming the wall joint.

• Telescopic anodised aluminium 4-sided tube with mm scale and locking screw for accurate work.
• Cross-shaped pressure plate with felt protection for sensitive door chucks with a depth of 6 to 13 cm or 13 to 30 cm.
• Reversible clamping brackets with enlarged clamping surfaces and removable brackets for safe and easy insertion of the door chuck.

Scope of delivery :

• 3 Door chuck clamps TU
• 4 Door chucks Directional clamps TFM-2K
• 1 carrier bag 

Handy, powerful 18 volt cordless impact drill with switchable percussion mechanism.

Ideal for most applications.

• Torque adjustable in 16 steps.
• Maximum torque 45Nm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• bit set
• Multi-purpose drill set 4,5,6,8,10,12mm
• Wood twist drill set 3,4,5,6,7,8,9,10mm

Powerful battery hand circular saw with a cutting depth of 57mm.

Ideal for roof work and interior finishing.

• Tilt adjustment up to 50°.
• Blowing device keeps the interface clean, with bright LED.
• Idle speed 5,000 min-1
• Cutting capacity 0° 57 mm
• Cutting capacity 45° 41 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• rip fence
• HM saw blade 24 teeth

Light and very handy planing machine, which can be used even with harder types of wood without problems.

Large V-groove for easy chamfering.

High planer shaft speed for a perfect finish.

• Planing width 82 mm
• Length of the plane sole 285 mm
• Chip removal infinitely variable 0-2.0 mm

Scope of delivery :

• Transport case
• charger
• 2 batteries
• rip fence

Very light and handy rechargeable Recipro saw.

Very fast sawing progress.

Adjustable guide shoe for optimal use of the saw blade.

Ideal for sawing wood, gypsum boards, metal (pipes and profiles) and even stones such as aerated concrete and sand-lime bricks.

Scope of delivery :

• Transport case
• charger
• 2 batteries
• Saw blades for wood or metal

The perfect machine for finishing and renovation work with a wide range of accessories for an outstanding variety of applications.

• Mains voltage 230 V
• Nominal power consumption350 W
• Tool holder StarlockPlus
• Tool change QuickIN

 Scope of delivery :

• Transport case
• grinding plates
• sanding sheets
• suction device
• firm spatula
• E-Cut Long-Life Saw Blade (35 mm)
• Universal E-Cut saw blade (44 mm)
• E-Cut Long-Life saw blade (65 mm)
• HSS segment saw blade
• Carbide segment saw blade
• Carbide rasp (triangular shape)

Ideal for mounting plasterboards on wood and metal constructions.

Idle speed 0-4.000 min

Scope of delivery :

• Transport case
• 2 batteries
• charger
• Bit PH 2

Ideal for sanding plasterboard and drywall fillers, or for removing wallpaper residues.

You can rent the suitable vacuum cleaner for vacuuming separately !

Scope of delivery :

• Transport case
• Long neck sander with grinding disc "super soft".
• 5 each grinding wheels 225mm K.80 and K.100

The combination of plunge saw and guide bar allows exact and tear-free cuts up to 55 mm without time-consuming reworking.

Perfect cutting to length of interior doors - guide rail with plunge saw.

Creation of expansion joints in parquet floors and shadow joints (wall distance 12 mm). Cutting of board material

• Power consumption 1 200 W
• Angle range -1 - 47 °
• Cutting depth 0 - 55 mm
• Cutting depth 45° 43 mm

Scope of delivery :

• Transport case
• Immersion Saw with HM Saw Blade 48Z
• Guide rail 1,4m in pocket

Extremely handy belt grinder for removing, plane grinding, smoothing and cleaning on wood, plastic and metal.

• Belt length x belt width 533 x 75 mm

Scope of delivery :

• Transport case
• extraction adapter
• dust bag
• stationary device
• sanding belts

Powerful low-vibration random orbit sander for comfortable working.

The eccentric movement ensures the finest sanding with high sanding performance.

Diameter grinding wheel 150 mm

Oscillating circuit 3 mm

Power consumption 310 Watt

Scope of delivery :

• Transport case
• Dust bag
• Grinding wheels K 80 , 120 , 180

Fine-grinding orbital sander with high stock removal rate.

Anti-vibration system for fatigue-free work.

Electronically adjustable vibration/stroke rate.

Abrasive paper fastening via quick-release lever or practical Velcro fastener.

Power consumption 330 Watt

Oscillating circuit 2.6 mm

Paper size 115 x 280 mm

Paper size Velcro 115 x 232 mm

Scope of delivery :

• Transport case
• Dust bag
• Sanding sheets grit 40,60,80,120

Whether freely guided or on the guide rail, the OF 1010 router is the ideal one-hand tool. Thanks to its size and low weight, it can be precisely guided along edges, lines or curves with just one hand. Easy cutter change thanks to spindle stop. Simple and 1/10 mm accurate adjustment of the milling depth. More safety thanks to quick brake. MMC Electronic for material-specific work and temperature monitoring. Chip extraction integrated in the milling table.

Scope of delivery :

• Systainer
• Guide rail FS 800
• guide rail adapter
• side stop
• chip catcher
• Collet 8mm
• 14 pieces cutter set

Tool case Proxxon

Handy universal tool case, also ideal for cars

- 14-piece combination wrench set from 6 - 19 mm

- 14 Sockets 1/2" size 8 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 and 24 mm

- Switch ratchet

- Cardan joint

- Extension 125 and 250 mm (the latter with sliding piece and 1/2" square for use as a T-handle for wheel nuts)

- Spark plug special inserts 16, 18 and 21 mm

- FLEX-DOT screwdriver set: slotted screwdriver sizes 3.0, 5.5 and 8.0 mm. Cross-recess screwdriver (PH) size 1 and 2

- Pocket wrench set, 8 pieces, for hexagon socket screws (HX 1.5 - 8.0 mm) and for TX screws (TX 9 - 40)

- Car light tester with cable and crocodile clip (for car electrical system)

- Knipex-combination pliers 180 mm

- Knipex water pump pliers 240 mm

- Engineer's hammer (300 g), ground and partially polished on all sides. With non-detachable graphite handle (glass fibre reinforced, non-slip soft component in the grip area) for unsurpassed vibration damping 

Powerful rechargeable percussion drill !

Technical data :

• Torque (soft/hard/max.) 47/85/- Nm
• Idle speed (1st gear / 2nd gear) 0 - 480 / 0 - 2,100 rpm
• Stroke rate, max. 31,500 min-1
• Drill chuck clamping range, min./max. 1.5 / 13 mm
• Battery voltage 18 V Torque steps 25 + 1

Drill diameter :

• drill-Ø wood, max. 82 mm
• Drill-Ø Steel, max. 13 mm
• Drill-Ø Masonry, max. 16 mm

Supplied accessories :

• 2 batteries
• Battery charger
• Bitset
• Multi-purpose drill set
• Wood drill set

Rechargeable battery-powered angle drill Bosch GWB 12V - 10

The compact solution for hard to reach places.

Extremely versatile thanks to 5 adjustable head positions: 0°/22.5°/45°/67.5°/90

Very compact: shortest (only 11 cm) adjustable head with 10-mm Auto-Lock drill chuck

High speed from 0-1300 min-1 for fast work progress - optimal for drilling

• Torque (soft/hard/max.)3/11/- Nm
• Battery voltage 12 V

Drill diameter :

• Drill-Ø wood, max.10 mm

Screw diameter :

• Screw-Ø, max.6 mm

Supplied accessories :

• 2 rechargeable batteries
• Battery charger

Battery - Planer Bosch GHO 18 V-LI

Fast work progress with infinitely variable cutting depth adjustment up to 1.6 mm

Ultrasonic sharp and durable HM reversible blades for a high surface quality

Compact and lightweight for comfortable working

• Idling speed 14,000 rpm
• Chip thickness 0 - 1.6 mm
• Folding depth 0 - 8 mm
• Plane width, max.82 mm
• Battery voltage 18 V

Supplied accessories :

• Charger
• 2 Batterys
• Planer knife 82 mm

Orbital sander Bosch GSS 230 AVE. First-class surface quality with lowest vibrations of its class (less than 2.5 m/s²) due to decoupled motor housing.

Uniform distribution of contact pressure for high surface quality

Perfect sandpaper fit even with paper without Velcro fastener due to the new paper tensioning system.

• Rated input power 300 W
• Idling speed 8,000 - 11,000 rpm
• Number of oscillations at no load 16.000 - 22.000 min-1
• Resonant circuit diameter 2.4 mm
• Weight 2,4 kg

Supplied accessories :

• Sanding sheets
• K40, K60, K80, K120

Wet/dry vacuum cleaner Bosch GAS 35M AFC

Versatile wet/dry vacuum cleaner with automatic filter cleaning.

L-BOXX can be clicked on as a practical transport and storage solution for mobile use

Permanent suction power for continuous work progress through automatic filter cleaning (AFC)

As a certified safety vacuum cleaner of dust class M according to EU standard, it covers most of the dust for high user protection

• Max. input power 1,380 W
• Weight 12,4 kg
• Gross tank volume 35 l
• Tank volume net 23 l
• Tank volume net water 19.2 l
• Dust class Wet/dry vacuum cleaner M
• Dust class M
• Tool dimensions (width) 450 mm
• Tool dimensions (length) 515 mm
• Tool dimensions (height) 575 mm
• Filter area 6.150 cm²Max.
• Air flow velocity (turbine) 74 l/sMax.
• negative pressure (turbine) 254 mbar

Highest precision for clean cuts

Thanks to high-quality machine components, precision saw blade and matching guide rail system, extremely precise results are guaranteed

The efficient dust extraction system and the sound-reduced saw blade ensure comfortable working, especially indoors

Adjustable speed setting allows cuts in a wide range of materials

Technical data :

• Rated input power 1.400 W
• Idling speed 3,600 - 6,250 min-1
• Saw blade bore -Ø20 mm

Depths of cut :

• Cutting depth without guide rail (90°)57 mm
• Cutting depth without guide rail (45°)42 mm

Supplied accessories :

• FSN Bag
• Guide rail FSN 1100

The precise specialist for wood joints

Smooth immersion function and robust metal angle guides for precise results

A wide range of angle and depth settings ensure a wide variety of joint cutting applications

Powerful 670 watt motor for optimum milling performance for the production of frame, corner, longitudinal and cross joints

Technical data :

• cutting depth, max.22 mm
• Idling speed 9,000 rpm
• Cutter diameter bore 22 mm
• Cutter diameter 105 mm
• Rated input power 670 W
• Voltage, electrical 230 V

Scope of delivery :

• HM Disc cutter 4 mm for flat dowel connections

Handy, powerful rechargeable battery screwdriver .

The ideal helper for interior work !

Technical data :

• torque, max. (hard/soft)25 / 5 Nm
• Idle speed0 - 4,200 min-1
• Battery voltage18 V
• tool holder1/4" hexagon socket
• Screw-Ø, max.4.2 mm
• Weight approx. 1,6 kg

Supplied accessories:

• 2 rechargeable batteries
• Battery charger
• Bit PH 2

The hot air blower is suitable, for example, for removing old paint on wood, or for carefully removing stickers, etc.

Technical data :

• Rated input power 2.300 W
• Working temperature 50 - 650°C
• Air flow 150 - 500 l/min
• Stepless temperature control +
• Cold stage 50°C+
• Regulation, air flow infinitely variable

Versatile drill screwdriver

FlexiClick System: easy to change accessories for up to 8 combinations.

Technical data :

• Torque (soft/hard/max.)20/35/- Nm
• Idle speed (1st gear / 2nd gear)0 - 460 / 0 - 1,750 rpm
• Battery type : Lithium-ion
• Drill chuck clamping range, min./max.0.8 / 10 mm
• Battery voltage12 V
• Weight excl. battery 0,59 kg
• Torque steps 20+1

Drill diameter:

• drill-Ø wood, max.32 mm
• Drill-Ø Steel, max.10 mm
• Screw diameter:
• Screw-Ø, max.8 mm

Supplied accessories :

• 2 rechargeable batteries
• Battery charger
• Drill Chuck Attachment
• Bit holder attachment
• Angle attachment
• Eccentric attachment

Electric tacker Metabo Ta E 2019

For processing staples, nails, profiled wood claws and joint claws

Also suitable for processing flat wire staples

Impact force regulation for adjusting the cutting depth

Look-up facility for incompletely driven-in staples

Nose with groove for targeted tacker placement

Protection against unintentional release of the impact

Technical data :

• Max. pulse sequence 20 /min
• Length staples (4 mm wide) 12 - 18 mm
• Length staples (10 mm wide) 8 - 18 mm
• Length flat wire clamps, (10 mm wide) 8 - 14 mm
• Length nails 19 mm
• Cable length 2.55 m

Supplied accessories :

• Fine wire staples type 53/8 mm
• Fine wire clamps type 53/10 mm

Paint milling machine Metabo LF 724 S

Up to 70% time saving compared to conventional working techniques.

For environmentally friendly removal of paint and varnish from flat wooden surfaces such as stairs, doors and windows

Suitable for processing untreated wood

Suitable for rebate processing due to lateral knives

Stepless adjustment of the milling depth

Carbide reversible blades can be used on four sides for a long service life

Suction possibility through connection of an all-purpose vacuum cleaner

• Torque 2 Nm
• Flying edge circle 80 mm
• Largest fold depth unlimited
• Lateral milling height 28 mm
• Axial milling depth 0 - 0.3 mm
• Radial milling depth 0.15 mm
• Nominal power input 710 W
• Output power 430 W
• Idling speed 10000 /min
• Speed at nominal load 6700 /min
• Cable length 4 m

Supplied accessories :

• HM-Reversing blade for LF

Chop saw Metabo KGSV 72 Xact SYM

Unique, patented combination of panel saw with pulling function and precise moulding saw with symmetrically adjustable stop system

Time-saving and precise sawing of mitres without calculating and measuring by simple angle transfer from bevel to stop system

• Compact pull function for wide workpieces up to 305 mm: no space required behind the saw
• Maximum flexibility during sawing due to table rotating on both sides and saw head inclinable on both sides
• Double line laser for exact display of the cutting line left and right of the saw blade
• With saw blade "multi cut" (flat/trapezoidal tooth) for high cutting quality and long service life e.g. in laminate and aluminium profiles
• Effective chip extraction via integrated chip collection funnel
• Quick and precise adjustment of common angles via snap-in points
• Bright LED work light for illumination of the interface (mains-operated, no batteries required)

Technical data :

• Max. cutting width 90°/45° 305/ 215 mm
• Max. cutting depth 90°/45° 72/ 42 mm
• Cutting capacity 90°/90° 305 x 72 mm
• cutting capacity 45°/45° 215 x 42 mm
• Rotary disk adjustment left/right 50/50 °
• Saw blade inclination left/right 47/47 °
• Saw blade 216 mm
• Rated input power S1 100% 1500 W
• Rated input power S6 20% 1800 W
• Idling speed 2200 - 6300 /min
• cutting speed 25 - 70 m/s
• Cable length 3 m

Tape file Metabo BFE 9-20

Powerful, compact belt file for grinding, satin finishing and deburring in hard-to-reach areas.

Grinding attachment can be swivelled 270° without tools for perfect adjustment to any working position.

Tool-free abrasive belt change and adjustable belt guide.

Technical data :

• Nominal power input 950 W
• Output power 510 W
• Belt speed idle 9 - 20 m/s
• Sanding belt width 6 - 19 mm
• Sanding belt length 457 mm
• Working length of sanding belt arm 90 mm
• Cable length 4 m

Supplied accessories :

• Abrasive belts Zirkon 6x457mm K.60
• Abrasive belts Zirkon 6x457mm K.120
• Abrasive belts zircon 19x457mm K.60
• Abrasive belts Zirkon 19x457mm K.120
• Fleece tapes 6x457mm medium
• Fleece tapes 19x457 medium

Moisture meter Gann Hydromette Compact S

• The Compact S is an electronic wood moisture meter for wood fuels with mean value calibration for soft and hard wood and a large 3-digit LCD display.
• The measuring tips attached to the top of the instrument allow moisture measurements in wood up to 30 mm thick.

for environmental protection due to lower emissions

to protect the stove and fireplace by improving combustion

for saving through a higher energy yield, because the wood is burned in the optimal moisture condition

Handy quick moisture meter in pocket size for single or series measurements

separate electrodes or cables required

Power supply:

• 9 V block battery

Galvanized panel lift

- Lifting height adjustable from 1510 to 3420 mm

- Maximum load capacity approx. 50 kg (corresponds to approx. 3.8 m² plasterboard (12.5 mm)

- Wheels lockable

- Frame and beams completely galvanized

- With hand winch

Very handy, light machine with optimum operating comfort. Enables fatigue-free and ergonomic working.

Technical data :

Power consumption 500 watts

Power output 270 Watt

Idling speed 1100-1650 /min

grinding wheel Ø 225 mm

Clip tool holder

Angle of inclination at the head 100 °

length 1520 mm

Cable length 5,0 m

Weight 3,9 kg

Scope of delivery :

Sanding sheets K.80

Sanding sheets K.100

Laminate Punch Straticut

Professional laminate cutter for cutting laminate panels with only 2 handles.

• For material thicknesses from 6 to 10mm especially for cutting laminate and MDF.
• Dust-free and without necessary electrical connection.
• max. cutting width: 210mm
• incl. compensation block

Edge grinding machine Nova

• Light and powerful parquet edge sanding machine
• Light and agile
• High grinding and working speed
• Efficient dust extraction
• Easily exchangeable grinding attachment

Technical data :

• Voltage : 230 V / 50 Hz
• Power consumption: 1150 W
• Weight: 7,9 kg
• Speed: 3,200 min1
• grinding disc: Ø 150 mm
• grinding attachment: 130mm 

Grinding attachment

Long grinding attachment for edge grinding machine Nova

Easily exchangeable grinding attachment for use of the Nova edge grinding machine under radiators.

• length 330mm

Single disc machines driving plate Schwamborn

For e.g. oil parquet.

Pad holder 406 mm

Supplied accessories :

• Grinding wheel pad 

Kärcher wet/dry vacuum cleaner NT 30/1 Tact L

For effective and quick cleaning of machines, vehicles, workshops and construction sites.

Thanks to the automatic filter cleaning system Tact and the moisture-resistant PES flat-fold filter, the compact all-purpose vacuum cleaner convinces in the dust-free removal of large quantities of fine dust over long working intervals.

• Filter bags are not included as the vacuum cleaner has an automatic filter cleaning system (Tact).

Technical data :

• Air flow rate (l/s)74
• Vacuum (mbar/kPa)254 / 25.4
• Tank capacity (l)30Max.
• input power(W)1380
• Standard nominal diameter35
• Sound pressure level (dB(A))69
• Container materialPlastic
• Number of current phases (Ph)1
• Frequency (Hz)50 - 60
• Voltage (V)220 - 240
• Weight (kg)13,5
• Dimensions (L × W × H) (mm)560 x 370 x 580

Scope of delivery :

• suction hose with elbow (2,5 m)
• wet/dry floor nozzle, 360 mm
• crevice nozzle
• 2 suction pipe, stainless steel 0.55 m
• flat-fold filter, PES

Christmas tree stand for max. 3.0 m tree height with foot lever function and single-rope technique.

• Trunk diameter 3-13 cm
• Water tank max. 3, 0 litres
• Weight 5, 0 kg
• Diameter 37 cm
• Mechanical water level indicator

The compact 18V battery cartridge press - for cartridges up to 310 ml capacity.

• Speed preselection with 9 speed settings and trigger for variable speed easy regulation of the material flow
• Thanks to 3.5 kN pressure force and a maximum feed rate of 8 mm/s, fast working progress even with viscous adhesives
• Thanks to the automatic reverse function, the pressure on the plunger rod is stopped when the trigger is released, preventing dripping or leaking of the material

Included accessories :

• 2 rechargeable batteries
• Charger

Powerful hand-held circular saw for accurate cutting of wooden boards and squared timber up to a maximum cutting depth of 85mm.

• Rated input power : 2200 Watt
• Mains voltage : 230 Volt
• Max. Cutting capacity in wood (90°) 85 mm
• Max. Max. cutting capacity in wood (45°) 65 mm
• Saw blade Ø 235 mm 
• Weight 7,8 kg

Scope of delivery :

• Circular saw blade Optiline Wood 24 teeth
• Guide rail 1400mm
• Transport case L-Boxx
• Suction adapter

The parquet sanding machine is suitable for renovating old planks ,parquet and wooden floors.

Also unevenness and old paint coats can be removed with this machine.

Collection best in pairs , or with suitable aids !

Technical data :

• Sizes of the abrasives: (belt) 200 mm x 480 mm
• roller width: 200 mm
• Roller diameter: 150,5 mm
• Roller speed: 3,000 rpm 
• Motor: 230 V, ~50 Hz; 1.5 kW
• Sound pressure level: max. 80 dB (A)
• Weight: approx. 50 kg

Supplied consumables :

• 2 sanding belts each K.40 , 60 , 100

Practical tool assortment for the handyman or do-it-yourselfer.

Consisting of :

• 1/2" reversible ratchet
• 1/2" extension 250 mm
• 1/2" universal joint 
• 1/2" sockets SW 10,11,12,13,14,15,16,17,18,19,21,22,24 mm
• Single open end spanner adjustable 0 - 27 mm
• Multiple pliers 180 mm
• Side cutters 160 mm
• Water pump pliers 250 mm
• Metalworker's hammer 500 g
• Bricklayer's chisel flat 250 x 16 mm
• Switch cabinet spanner universal
• Mini LED light incl. articulated base
• Cable knife
• Offset screwdriver set hex SW 1,3 , 1,5 ,2 , 2,5 , 3 , 4 ,5 ,6 ,8 ,10 mm
• Offset screwdriver set Torx T9,T10,T15,T20,T25,T27,T30,T40
• VDE Screwdriver slot 0,4x2,5 0,8x4,0 1,0x5,5 1,2x6,5 mm
• VDE Screwdriver cross slot PH 0 , 1 , 2
• Voltage tester slot 220-250V 3 mm
• Wooden ruler 2 m
• Key file set flat butt , triangular , square , half round , round , flat point

Practical electronics tool assortment for the handyman or do-it-yourselfer.

Consisting of :

• Bricklayer's chisel 250x16 mm
• Electrician's chisel 4kt. 250x10x7 mm
• Locksmith's hammer 500 g
• Open-ended spanner adjustable 0 - 25 mm
• Water pump pliers 250 mm
• Automatic wire stripper 
• Multiple pliers 180 mm
• VDE Side cutters 160 mm
• VDE Flat round nose pliers 200 mm
• VDE Flat round nose pliers angled 200 mm
• VDE Wire strippers 160 mm
• VDE Cable shears 200 mm
• Universal cable knife blade length 50 mm
• Electrical insulating tape black
• Spatula 60 mm
• Offset screwdriver set hex SW 1,3 , 1,5 ,2 , 2,5 , 3 , 4 ,5 ,6 ,8 ,10 mm
• VDE Screwdriver slotted 0.4x2.5 0.8x4.0 1.0x5.5 1.2x6.5 mm
• VDE Screwdriver cross slot PH 0 , 1 , 2
• Voltage tester slot 220-250V 3 mm
• Voltage tester Duspol expert 12 - 1000 Volt
• Electrical cabinet spanner
• Wooden ruler 2 m

Practical tool assortment for the handyman or do-it-yourselfer.

Consisting of :

• 1/4" reversible ratchet fine toothed 72 teeth 150 mm
• 1/4" square socket handle 165 mm
• 1/4" socket 4 , 4,5 , 5 , 5,5 , 6 , 7 ,8 ,9 ,10 ,11 ,12 ,13 mm
• 1/4" socket extension 50 + 100 mm
• 1/4" cross handle with slide 115 mm
• 1/4" universal joint 32 mm
• Bit adapter 1/4" 4kt x 1/4" 6kt  
• 1/4" bits Allen 3 ,4 ,5 ,6 , 8 , 10 mm
• 1/4" bits slotted 4 , 5,5 , 7 mm
• 1/4" bits cross recess PH 1 , 2 , 3 , 4
• 1/4" bits cross recess PZ 1 , 2 , 3
• 1/4" bits Torx TX 8 , 10 ,15 , 20 , 25 , 27 , 30 , 40
• 1/2" Reversible ratchet fine toothing 72 teeth 250 mm
• 1/2" socket 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,26,27,28,30,32 mm
• 1/2" socket extension 125 + 250 mm
• 1/2" universal joint 65 mm
• Enlargement/sliding piece 3/8" x 1/2
• Combination spanner SW 8,9,10,11,12,13,14,15,16,17,18,19
• Offset screwdriver set hexagon SW 1,5 ,2 , 2,5 , 3 , 4 ,5 ,6 ,8 ,10 mm
• Open-end spanner adjustable 0 - 30 mm
• Screwdriver slot 4 , 5,5 , 6,5 mm
• Screwdriver cross recess PH 1 ,2 ,3
• Side cutters 180 mm 
• Flat-nose pliers 200 mm
• Water pump pliers 250 mm
• Metalworker's hammer 500 g.

Powerful cordless impact drill !

Technical data :

• Torque (soft/hard/max.) 31/60/- Nm  
• Idle speed (1st gear / 2nd gear) 0 - 600 / 0 - 1900 min-1
• Impact speed, max. 28,500 min-1
• Chuck clamping range, min./max. 1.5 / 13 mm
• Battery voltage 18 V 
• Torque steps 20 + 2

Drill diameter :

• Drill-Ø wood, max. 38 mm
• Drill-Ø steel, max. 13 mm
• Drill-Ø masonry, max. 13 mm

Included accessories :

• 2 batteries
• Charger
• Bit set
• Multi-purpose drill bit set
• Wood drill bit set

Split wood without much physical effort.

Attachment for our mini-excavator Takeuchi TB 216 , speedy work on large or small timber.

Technical data :

• Carrier: 1 - 6 tons 
• Weight: 119 - 128 kg
• Drive shaft: 100 mm diameter
• Cone: 200 mm diameter

Mobile compact wood chipper up to 19 cm diameter.

• Daily rent includes 8 operating hours, additional hours will be charged manually.
• Machine must be returned cleaned and fully fuelled !

Technical data:

• Fuel: diesel
• Single-axle chassis 80 km/h
• PowerGrip feed roller up to 19 cm
• 2-knife chipping disc with adjustable knives

Compact and versatile stump grinder for large and small stumps .

Technical data :

• Engine power 11 kw / 15 PS
• Petrol engine
• Milling disc 370 mm

Construction prop according to EN 1065

• Adjustment range 1.76-3.00 m
• Material / Surface steel painted
• prop lock steel galvanised
• Load capacity see download link "Assembly instructions
• Weight 14 kg

Construction prop according to EN 1065

• Adjustment range 2.04-3.50 m
• Material / Surface steel painted
• prop lock steel galvanised
• Load capacity see download link "Assembly instructions
• Weight 16,5 kg

Construction prop according to EN 1065

• Adjustment range 2.34 - 4.00 m
• Material / Surface steel painted
• prop lock steel galvanised
• Load capacity see download link "Assembly instructions
• Weight 18 kg

Construction prop according to EN 1065

• Adjustment range 3.03 - 5.50 m
• Material / Surface steel galvanised
• prop lock steel galvanised
• Load capacity see download link "Assembly instructions
• Weight 31,4 kg

Window support size 1

• Weight 7.8 kg
• Material / Surface painted steel
• Load capacity 15kN 
• Adjustment range 0.95-1.50 m
• Column lock Lacquered steel

Window support size 2

• Weight 9,4 kg
• Material / Surface painted steel
• Load capacity 15kN
• Adjustment range 1.25 - 2.00 m
• Column lock lacquered steel

Inclined support size 1 

• Weight 17 kg
• Material / surface steel lacquered
• Adjustment range1,80-3,00 m
• prop lock lacquered steel
• Tensile and compressive force see download link "Assembly instructions
• Joint perforation Ø 17 mm / Ø 27 mm

Inclined support size 2

• Weight 21 kg
• Material / surface steel lacquered
• Adjustment range 2.10 - 3.65 m
• prop lock lacquered steel
• Tensile and compressive force see download link "Assembly instructions
• Joint perforation Ø 17 mm / Ø 27 mm

Tripod stand for slabs / formwork props

Column head for floor props

Universal stacking frame

• Weight 25 kg
• Material / surface steel lacquered
• Load capacity 1000kg
• Test TÜV GS
• Standard/Regulation DIN EN 13626
• inside dimensions LxWxH 120x80x70 cm
• stackable 4-fold

The PF 20 formwork beams impress with their high dimensional stability and low weight.

Rounded beam ends.

• Length 2.45 metres

The PF 20 formwork beams impress with their high dimensional stability and low weight.

Rounded beam ends.

• Length 2.90 metres

The PF 20 formwork beams impress with their high dimensional stability and low weight.

Rounded beam ends.

• Length 3.30 metres

The formwork beams PF 20 convince with high dimensional stability and low weight.

Rounded beam ends.

• Length 3.60 metres

The formwork beams PF 20 convince with high dimensional stability and low weight.

Rounded beam ends.

• Length 3.90 metres

The formwork beams PF 20 convince with high dimensional stability and low weight.

Rounded beam ends.

• Length 4.90 metres

Suitable for our single disc machine Schwamborn STR 581.

For sanding e.g. prefabricated parquet etc.

Included accessories :

• 8 sanding discs each 150mm K. 40 , 60 , 80 , 120
• Suction ring