Powerful SDS-max impact hammer with very high stock removal rate.

The specialist for breakthroughs and demolition work.

Extreme impact force with 16.8 Joule for high stock removal rate

Low vibration during operation and idling. 

Scope of delivery:

- Additional handle

Supplied consumables:

- flat chisel

- pointed chisel

- spade chisel

- fettube

Fast tile laying with additional line at 45° Projects in addition to the two laser lines at an angle of 90° a third line at 45° for precise and fast alignment and laying of wall and floor tiles.

High accuracy of 0.2 mm/m

Working range up to 20 m

 Scope of delivery:

- aligning washer

- laser target

Supplied consumables: 

- 4 x 1.5 V-LR6 battery (AA)

Tile cutting machine for easy and clean work.

Removable water tray - Easy cleaning and filling of water Pivoting cutting table - cuts from 0 - 45° are possible.

Low weight (11kg) -

Good handling and easy transport

Max. Cutting depth at 90° 34 mm

Max. Cutting depth at 45° 24mm

Scope of delivery :

Transport case

Slide disc Classic Ceramic

Rental Delivered Consumables :

Slide disc 180mm Classic Ceramic

Diamond dry core drill Ø 111mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Battery impact wrench Bosch GDS 18 V-LI HT

High torque (650 Nm) for hard screw applications in metal (M 12 - M 20) and concrete

Idling speed 0-1,900 rpm

Torque, max.650 Nm

Beat rate 0-2,100 bpm

Battery voltage 18 V

Tool holder 1/2" external square

Supplied accessories :

Socket wrench inserts 77mm long SW 10 - 27 mm

10,11,13,17,19,21,22,24,27 mm

Powerful rechargeable percussion drill !

Technical data :

Torque (soft/hard/max.) 47/85/- Nm

Idle speed (1st gear / 2nd gear) 0 - 480 / 0 - 2,100 rpm

Stroke rate, max. 31,500 min-1

Drill chuck clamping range, min./max. 1.5 / 13 mm

Battery voltage 18 V Torque steps 25 + 1

Drill diameter :

drill-Ø wood, max. 82 mm

Drill-Ø Steel, max. 13 mm

Drill-Ø Masonry, max. 16 mm

Supplied accessories :

2 batteries 5,0 Ah

Battery charger

Bitset

Multi-purpose drill set

Wood drill set

SDS-max hammer drill for comfortable handling in time-consuming applications.

Fast drilling progress and high removal rate.

Vibration control and low weight allow effortless operation in continuous and time-consuming applications.

Drill-Ø in concrete with hollow core bits 40 - 90 mm

Drill-Ø concrete 12 - 40 mm

Impact energy 8.8 J

Scope of delivery:

- Additional handle

Supplied consumables:

- 2 x pointed chisels

- 2 x flat chisels 

- fettube 

- 1 x drill 18mm

- 1 x drill 30mm

 Powerful 18 Volt SDS-plus battery-powered hammer drill with optimum power-to-weight ratio.

Drill-Ø in concrete 4 - 26 mm

Impact energy 2.6 J

Scope of delivery:

- Additional handle

- depth stop

- Quick charger GAL 1880 CV

- 2 x Battery GBA 18V 5,0 Ah

Supplied consumables:

- SDS-plus 5 drill set Ø 5 - 10 mm

- Flat + pointed chisel

Lightweight SDS-plus hammer for comfortable continuous use. This power tool is suitable for chiselling in concrete, masonry, wood and tiles. Impact energy 2.6 J

Scope of delivery:

- Additional handle

Supplied consumables:

- Pointed chisel

- tile chisel

- flat chisel

- fettube

High-performance demolition hammer with 28 mm hexagon socket for demolition work in concrete and stone. 62 Joule impact energy for maximum demolition performance.

Scope of delivery:

- Transport trolley for GSH 27

Supplied consumables:

- Pointed chisel

- flat chisel

Professional concrete mixer with handwheel and foot brake for easy operation. With 240 mm plastic elastic wheels, restart protection and GS test protection Motor power: 700 watts Drum volume: max. 145 litres Protection class: II Protection class: IP45 Net weight: 54 kg Dimensions LxWxH: 126 x 68 x 132 cm

Robust 2-speed agitator for universal requirements. Powerful and powerful at all material viscosities; top ergonomics due to upright working position and handle shape; electronic speed control; ideal quantity per mixture 65 litres.

Supplied consumables:

- Mixing tool MK 140 HF

- Mixing tool WK 140 HF

Stone and concrete do not represent a major obstacle for the powerful wall grooving machine. The two 150 mm diamond discs are driven by a powerful 1400 Watt motor. The "Constant Electronic" system ensures a constant speed so that the wall grooving machine can work its way through the masonry quickly and efficiently. The distance between the two discs can be set between 3 and 39 millimetres, depending on requirements, at depths of up to 35 millimetres. The remaining web can then simply be broken out. The scope of delivery includes three 4 millimetre and four 6 millimetre spacers, a mounting flange, a tool for breaking out the remaining wall bar, a craftsman's case, a round nut and an offset two-hole wrench.

Supplied consumables: 

- 4x diamond disc 

Diamond dry core drill Ø 131mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

The Bosch SDS max impact hammer for convenient handling in time-consuming applications

Vibration control and light weight allow effortless operation in continuous and time consuming applications

The powerful motor delivers 8.3 joules of impact energy for high stock removal

Technical data :

Rated input power1.150

Impact energy 2 - 8.3 J

Stroke rate at nominal speed 1,300 - 2,900 bpm

Tool holder SDS max

Voltage, electrical230 V

Supplied accessories :

Spatula Chisel

Flat chisels

Grease

1300 watt high torque impact drill for the heaviest applications with high diameters (drilling, working with hollow core bits and hole saws) as well as screwing and stirring. Constant-Electronic for more comfortable working, keeps speed constant even under load. Torque control for high precision: Torque preselection for even screw insertion. 

Scope of delivery:

- Quick-action drill chuck

- depth stop

- additional handle

Supplied consumables:

- Multi-purpose drill set 8 pieces, Ø 3.0 - 8.0 mm

Demolition hammer with 30 mm hexagon socket for demolition work in concrete and stone. The powerful motor delivers 41 joules of impact energy for outstanding removal performance.

Scope of delivery:

- Additional handle

Supplied consumables:

- Pointed chisel

- flat chisel

- fettube

Light, professional, leading vibratory plate with electric motor and a plate size of 488 x 380 mm.

No exhaust / no emissions, ideal for use in indoor and poorly ventilated areas.

8 mm thick, robust base plate for optimum compression.

Retractable handle, perfect for transport and storage.

Engine power : 1,5 KW

Voltage : 230 V

Centrifugal force :12,0 kN

Weight : 50 kg

Diamond socket countersink 68mm for e.g. sockets, can be used in: Masonry sand-lime brick Poroton and similar abrasive materials Use without impact, absolutely pre-drill (6mm). Centring drill is only used for guiding when setting up, then removing. and finish drilling without centring drill.

Scope of delivery :

68mm socket drill bit

Center drill 6,5mm

drift wedge

Recording 6-kt.

Recording SDS-Plus

Diamond dry core drill Ø 151mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 161mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Special battery-powered saw for the toughest applications. Ideal for sawing wood and poroton up to strength class 20 N/mm². Durable, low-vibration and recoilless double saw blade system with quick saw blade stop within 3 seconds.

Reinforced sword for higher accuracy, more precise cuts and significantly longer service life. Saw blade length:430mm

Scope of delivery:

- 2 x battery 

- charger

Supplied consumables:

- 1 x special saw blade for cutting e.g. poroton, hollow bricks

Powerful concrete grinder with a motor power of 1500 watts for high

Work progress, even under load. Movable protective hood element allows grinding directly to the edges of floors, walls and ceilings. Cup wheel Ø 125 mm

Supplied consumables:

- spare brush ring

- Diamond cup wheel Ø 125 mm

Powerful angle grinder with 230 mm disc diameter. Optimum handling due to low weight. Vibration control main and additional handle reduces vibrations by up to 50 % for fatigue-free work.

Scope of delivery:

- Mounting flange

- clamping nut

- protective hood

- two-hole wrench

- Additional handle Vibration Control

Supplied consumables:

- Cutting disc Ø 230 mm for metal

- Diamond saw blade Ø 230 mm for concrete 

Professional, leading vibratory plate with electric motor and a plate size of 450 x 583 mm.

No exhaust / no emissions, ideal for use in indoor and poorly ventilated areas.

8 mm thick, robust base plate for optimum compression. Integrated, foldable chassis.

Engine power : 2.2 KW Voltage : 230 Volt

Centrifugal force : 16.0 kN

Weight : 97 kg

Wet/dry vacuum cleaner Bosch GAS 35M AFC

Versatile wet/dry vacuum cleaner with automatic filter cleaning.

L-BOXX can be clicked on as a practical transport and storage solution for mobile use

Permanent suction power for continuous work progress through automatic filter cleaning (AFC)

As a certified safety vacuum cleaner of dust class M according to EU standard, it covers most of the dust for high user protection

Max. input power 1,380 W

Weight 12,4 kg

Gross tank volume 35 l

Tank volume net 23 l

Tank volume net water 19.2 l

Dust class Wet/dry vacuum cleaner M

Dust class M

Tool dimensions (width) 450 mm

Tool dimensions (length) 515 mm

Tool dimensions (height) 575 mm

Filter area 6.150 cm²Max.

Air flow velocity (turbine) 74 l/sMax.

negative pressure (turbine) 254 mbar

For optimal guidance of the Cedima core drilling unit C-BMH-160

Guide rail made of aluminium profile

Carrying handle for easy transport

Feed slide: roller guide with eccentric adjustment

Double support of the column to the rear

Column infinitely adjustable up to 45

stable dowel base with integrated adjustment screws

Slide lockable

Quick coupling enables quick and easy assembly/disassembly of the drill motor on the drill stand

Dowel and screw-in tool for fixing the drill rig are included with .

Powerful 830 Watt hammer drill with SDS-plus and quick-change drill chuck for universal applications. A fast all-rounder for daily use on the construction site or around the house. Drill-Ø in concrete with hollow core bits max. 68 mm Drill-Ø concrete 4 - 26 mm Drill-Ø metal max. 13 mm Drill-Ø wood max. 30 mm Impact energy 2.7 J (Ideal for e.g. chiselling tiles, chiselling cable slots etc.)

Scope of delivery:

- Quick-change drill chuck

- Exchangeable chuck SDS-plus

- depth stop

- additional handle

Supplied consumables:

- Robust Line Multi-purpose drill set Ø 4 - 12 mm

- Drill set SDS-plus Ø 6/8/10 mm 

Powerful 125mm angle grinder for high work throughput thanks to powerful 1,300 watt motor with Constant-Electronic. User protection through KickBack Control, restart protection, torsion-proof protective hood and reduction of vibrations.

Scope of delivery: 

- Additional handle

- mounting flange

- clamping nut

- protective hood

- two-hole wrench

Supplied consumables:

Cutting disc Ø 125 mm for metal 

High-performance SDS-max hammer drill for heavy-duty chiselling work.

This hammer drill is suitable for drilling up to a diameter of 52 mm as well as for heavy chiselling work in concrete and stone.

It features constant speed, restart protection, overload clutch, speed preselection and vibration control for effortless operation in continuous and time-consuming applications.

Drill-Ø in concrete with hollow core bits

up to max.150 mm

Drill-Ø concrete 12 - 52 mm

Impact energy 19 J

Scope of delivery: 

- Additional handle

Supplied consumables: 

1 x pointed chisel

1 x flat chisel

1 x spade chisel

1x Fettube

Diamond can countersink 82mm for e.g. junction boxes, can be used in: Masonry sand-lime brick Poroton and similar abrasive materials Use without impact, absolutely pre-drill (6mm). Centring drill is only used for guiding when setting up, then removing. and finish drilling without centring drill.

Scope of delivery :

82mm socket drill bit

Center drill 6,5mm

drift wedge

Recording 6-kt.

Recording SDS-Plus

Diamond dry core drill Ø 61mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Diamond dry core drill Ø 81mm

Useful length 300mm

Connection 1 1/4" UNC socket

Application:masonry,sand-lime brick,poroton,bricks

Cordless angle grinder Bosch GWS 18V-SC

Small angle grinder with the same power as a wired grinder with 1,000 watts thanks to brushless EC motor.

Idle speed 4,500 - 9,000 rpm

Battery voltage 18 V

Grinding spindle thread M 14

Drill hole 22,23 mm

Supplied accessories :

2 batteries 5,0 Ah

Battery charger

Cutting discs 125 x 1 mm metal

With the diamond drilling machine you can drill perfect holes in masonry and sand-lime brick using the dry drilling method.

Connection thread R 1/2" + 1 1/4" UNC

Voltage (V/Hz) 230/50~60

Speed (min-1) Load: 600/ 960/ 2780

Engine power 2 KW

Must be used in combination with a vacuum cleaner.

Dry core drills usable length 300mm in 61,81,111,131,151,161 mm ,drill rig and suitable vacuum cleaner can be rented separately.

Scope of delivery :

Drilling motor in transport case

centering aid