Overview
Search results

Overview
Stone & Concrete Tools


Gedore Tool assortment electrician 36 pieces 1100-02
Practical electronics tool assortment for the handyman or do-it-yourselfer.
Consisting of :
- Bricklayer's chisel 250x16 mm
- Electrician's chisel 4kt. 250x10x7 mm
- Locksmith's hammer 500 g
- Open-ended spanner adjustable 0 - 25 mm
- Water pump pliers 250 mm
- Automatic wire stripper
- Multiple pliers 180 mm
- VDE Side cutters 160 mm
- VDE Flat round nose pliers 200 mm
- VDE Flat round nose pliers angled 200 mm
- VDE Wire strippers 160 mm
- VDE Cable shears 200 mm
- Universal cable knife blade length 50 mm
- Electrical insulating tape black
- Spatula 60 mm
- Offset screwdriver set hex SW 1,3 , 1,5 ,2 , 2,5 , 3 , 4 ,5 ,6 ,8 ,10 mm
- VDE Screwdriver slotted 0.4x2.5 0.8x4.0 1.0x5.5 1.2x6.5 mm
- VDE Screwdriver cross slot PH 0 , 1 , 2
- Voltage tester slot 220-250V 3 mm
- Voltage tester Duspol expert 12 - 1000 Volt
- Electrical cabinet spanner
- Wooden ruler 2 m


Bosch Demolition Hammer (3,5 kg) GSH 3 E
Lightweight SDS-plus hammer for comfortable continuous use. This power tool is suitable for chiselling in concrete, masonry, wood and tiles.
- Impact energy 2.6 J
Scope of delivery:
- Additional handle
Supplied consumables:
- Pointed chisel
- tile chisel
- flat chisel
- fettube


Bosch Concrete Grinder GBR 15 CAG
Powerful concrete grinder with a motor power of 1500 watts for high
Work progress, even under load. Movable protective hood element allows grinding directly to the edges of floors, walls and ceilings.
Supplied consumables:
- Diamond cup wheel Ø 125 mm


Bosch Rotary hammer drill GBH 4-32 DFR
The GBH 4-32 DFR Professional is the most powerful SDS plus hammer drill.
This power tool is suitable for drilling and chiselling in concrete, masonry, wood and metal.
Technical data:
- Rated input power 900 W
- Impact energy 4.2 J
- Stroke rate at nominal speed 0 - 3,600 bpm
- Rated speed 0 - 800 min-1
- Weight 4,7 kg
- Tool holder SDS-plus
- Voltage, 230 V
Drilling range :
- drill-Ø concrete, hammer drill 6 - 32 mm
- Max. drill-Ø masonry, drill bits90 mm
- Max. Drill diameter in metal 13 mm
- Max. drill-Ø wood 32 mm
Scope of delivery :
- Drill chuck SDS-Plus
- Drill chuck (3 jaws)
- SDS drill set 6,8,10mm
- SDS Pointed chisel
- SDS flat chisel
- Fat tube


Bosch Cordless Rotary Hammer (4 kg) GBH 18 V 26
Powerful 18 Volt SDS-plus battery-powered hammer drill with optimum power-to-weight ratio.
- Drill-Ø in concrete 4 - 26 mm
- Impact energy 2.6 J
Scope of delivery:
- Additional handle
- depth stop
- Quick charger
- 2 x Battery
Supplied consumables:
- SDS-plus drill bit set Ø 6,8,10 mm
- Flat chisel
- Pointed chisel


Bosch Battery impact drill GSB 18V-85C
Powerful rechargeable percussion drill !
Technical data :
- Torque (soft/hard/max.) 47/85/- Nm
- Idle speed (1st gear / 2nd gear) 0 - 480 / 0 - 2,100 rpm
- Stroke rate, max. 31,500 min-1
- Drill chuck clamping range, min./max. 1.5 / 13 mm
- Battery voltage 18 V Torque steps 25 + 1
Drill diameter :
- drill-Ø wood, max. 82 mm
- Drill-Ø Steel, max. 13 mm
- Drill-Ø Masonry, max. 16 mm
Supplied accessories :
- 2 batteries
- Battery charger
- Bitset
- Multi-purpose drill set
- Wood drill set


Bosch Battery angle grinder GWS 18V-10SC
Cordless angle grinder Bosch GWS 18V-SC
Small angle grinder with the same power as a wired grinder with 1,000 watts thanks to brushless EC motor.
- Idle speed 4,500 - 9,000 rpm
- Battery voltage 18 V
- Grinding spindle thread M 14
- Drill hole 22,23 mm
Supplied accessories :
- 2 batteries 5,0 Ah
- Battery charger
- Cutting discs 125 x 1 mm metal


Bosch Chisel hammer GSH 5 CE
The Bosch SDS max impact hammer for convenient handling in time-consuming applications
Vibration control and light weight allow effortless operation in continuous and time consuming applications
The powerful motor delivers 8.3 joules of impact energy for high stock removal
Technical data :
- Rated input power1.150
- Impact energy 2 - 8.3 J
- Stroke rate at nominal speed 1,300 - 2,900 bpm
- Tool holder SDS max
- Voltage, electrical230 V
Supplied accessories :
- Point Chisel
- Flat chisels
- Grease


Bosch Wall Chaser GNF 35 CA
Stone and concrete are not much of an obstacle for the powerful wall groover.
The two 150-millimetre diamond discs are driven by a powerful 1400-watt motor.
The "Constant Electronic" system ensures a constant speed so that the wall groover works quickly and swiftly through the masonry.
- The distance between the two discs can be adjusted between 3 and 39 millimetres as required
- in depth up to 35 millimetres
Afterwards, the remaining web can simply be broken out.
- The scope of delivery includes three 4-millimetre and four 6-millimetre spacer discs
- a mounting flange
- a tool for breaking out the remaining masonry bar
- a workman's case
- a round nut
- and a cranked two-hole spanner
Supplied consumables:
- 2 diamond blade


KKB Weber Internal vibrator 40 mm Ivur 40
Fresh concrete in walls and formwork can be effectively compacted with a submersible vibrator.
The vibrator bottle allows the trapped air bubbles to rise and escape through vibration.
This compacts the concrete sustainably.
Careful compaction increases the quality of the erected concrete part.
Technical data :
- Bottle diameter : 40 mm
- Bottle length : 330 mm
- Rated power : 650 W
- Supply voltage : 230 V


Schwamborn Scrubbing brush Schrubbürste Perlon/Draht
scrubbing brush nylon/wire hard
The suitable attachment for Schwamborn single disc machine STR 581, for cleaning e.g. paving slabs, terrace slabs.
diameter 420 mm


Kärcher Wet/dry vacuum cleaner NT 30/1 Tact L
Kärcher wet/dry vacuum cleaner NT 30/1 Tact L
For effective and quick cleaning of machines, vehicles, workshops and construction sites.
Thanks to the automatic filter cleaning system Tact and the moisture-resistant PES flat-fold filter, the compact all-purpose vacuum cleaner convinces in the dust-free removal of large quantities of fine dust over long working intervals.
- Filter bags are not included as the vacuum cleaner has an automatic filter cleaning system (Tact).
Technical data :
- Air flow rate (l/s)74
- Vacuum (mbar/kPa)254 / 25.4
- Tank capacity (l)30Max.
- input power(W)1380
- Standard nominal diameter35
- Sound pressure level (dB(A))69
- Container materialPlastic
- Number of current phases (Ph)1
- Frequency (Hz)50 - 60
- Voltage (V)220 - 240
- Weight (kg)13,5
- Dimensions (L × W × H) (mm)560 x 370 x 580
Scope of delivery :
- suction hose with elbow (2,5 m)
- wet/dry floor nozzle, 360 mm
- crevice nozzle
- 2 suction pipe, stainless steel 0.55 m
- flat-fold filter, PES


Cedima Drill rig P-250
For optimal guidance of the Cedima core drilling unit C-BMH-160
- Guide rail made of aluminium profile
- Carrying handle for easy transport
- Feed slide: roller guide with eccentric adjustment
- Double support of the column to the rear
- Column infinitely adjustable up to 45
- stable dowel base with integrated adjustment screws
- Slide lockable
- Quick coupling enables quick and easy assembly/disassembly of the drill motor on the drill stand
- Dowel and screw-in tool for fixing the drill rig are included with .


Probst Kerbstone setting pliers BVZ
Universally applicable for all design elements found in gardening and landscaping due to large adjustable opening range.
Technical data :
- Gripping range W (mm): 0-550
- Immersion depth E (mm): 210
- Jaw length L (mm): 200
- Load capacity (kg): 200
- Dead weight (kg): 12


Bosch Battery cartridge press GCG 18V-310
The compact 18V battery cartridge press - for cartridges up to 310 ml capacity.
- Speed preselection with 9 speed settings and trigger for variable speed easy regulation of the material flow
- Thanks to 3.5 kN pressure force and a maximum feed rate of 8 mm/s, fast working progress even with viscous adhesives
- Thanks to the automatic reverse function, the pressure on the plunger rod is stopped when the trigger is released, preventing dripping or leaking of the material
Included accessories :
- 2 rechargeable batteries
- Charger


Probst Plate lifter PPH 33/62
For laying concrete and natural stone slabs.
- Gripping range 330- 620 mm
- Load capacity 60 kg


Ideal Earth / concrete tamper WEG 10551
The tamping foot is specially designed for tamping sand, soil or chippings in hard-to-reach places.
Ideal for places where the use of a vibrator is impossible or not recommended.
- Weight 9 kg
- Surface 200x200 mm
- Stick height 76 cm


Gedore Tool assortment electrician 36 pieces 1100-02
Practical electronics tool assortment for the handyman or do-it-yourselfer.
Consisting of :
- Bricklayer's chisel 250x16 mm
- Electrician's chisel 4kt. 250x10x7 mm
- Locksmith's hammer 500 g
- Open-ended spanner adjustable 0 - 25 mm
- Water pump pliers 250 mm
- Automatic wire stripper
- Multiple pliers 180 mm
- VDE Side cutters 160 mm
- VDE Flat round nose pliers 200 mm
- VDE Flat round nose pliers angled 200 mm
- VDE Wire strippers 160 mm
- VDE Cable shears 200 mm
- Universal cable knife blade length 50 mm
- Electrical insulating tape black
- Spatula 60 mm
- Offset screwdriver set hex SW 1,3 , 1,5 ,2 , 2,5 , 3 , 4 ,5 ,6 ,8 ,10 mm
- VDE Screwdriver slotted 0.4x2.5 0.8x4.0 1.0x5.5 1.2x6.5 mm
- VDE Screwdriver cross slot PH 0 , 1 , 2
- Voltage tester slot 220-250V 3 mm
- Voltage tester Duspol expert 12 - 1000 Volt
- Electrical cabinet spanner
- Wooden ruler 2 m


Bosch Battery impact drill GSB 18V-60 C
Powerful cordless impact drill !
Technical data :
- Torque (soft/hard/max.) 31/60/- Nm
- Idle speed (1st gear / 2nd gear) 0 - 600 / 0 - 1900 min-1
- Impact speed, max. 28,500 min-1
- Chuck clamping range, min./max. 1.5 / 13 mm
- Battery voltage 18 V
- Torque steps 20 + 2
Drill diameter :
- Drill-Ø wood, max. 38 mm
- Drill-Ø steel, max. 13 mm
- Drill-Ø masonry, max. 13 mm
Included accessories :
- 2 batteries
- Charger
- Bit set
- Multi-purpose drill bit set
- Wood drill bit set


KKB Bomag Vibratory plate forward running 82 kg/10 kn BVP 10/36
Small forward-moving vibratory plate for the most common applications in repairs and repair work in earthworks, asphalt and paving.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Working width : 360 mm
- Centrifugal force : 10 kn
- Own weight : 82 kg
- Fuel : Petrol


KKB Bomag Vibratory plate forward running 94 kg/20 kn BP 20/50
Small forward-moving vibratory plate for the most common applications in repairs and repair work in earthworks, asphalt and paving.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Working width : 500 mm
- Centrifugal force : 20 kn
- Own weight : 94 kg
- Fuel : Petrol


KKB Weber MT Vibratory plate forward running 83 kg/15 kn CF 2 Hd
High operating comfort, compact dimensions and optimal running characteristics characterise the forward running vibratory plates CF 2 Hd.
Their field of application is compaction tasks in gardening and landscaping as well as repair work.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Working width : 450 mm
- Centrifugal force : 15 kn
- Own weight : 83 kg
- Fuel : Petrol


KKB Bomag Plastic mat .
Plastic mat / Vulkalan mat for Bomag vibratory plate BVP 18/45
For gentle vibration of the pavement.


KKB Bomag Plastic mat .
Plastic mat / Vulkalan mat for Bomag vibratory plate BVP 10/36
For gentle vibration of the pavement.


KKB Bomag Vibrating plate with stonegard 169 kg/25 kn BPR 25/50 D
By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate.
Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed.
Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone.
As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: Hatz diesel
- Power: 3.1 kW
- Working width: 530 mm
- Centrifugal force: 25 kN
- Working speed: 20 m/min.
- Frequency: 85 Hz


KKB Bomag Vibrating plate with stonegard 248 kg/35 kn BPR 35/60 D
By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate.
Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed.
Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone.
As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: Hatz diesel
- Power: 3.1 kW
- Working width: 630 mm
- Centrifugal force: 35 kN
- Working speed: 20 m/min
- Frequency: 80 Hz
- Operating weight: 248 kg


KKB Bomag Plastic mat .
Plastic mat / Vulkalan mat for Bomag vibratory plate BP 20/50
For gentle vibration of the pavement.


KKB Weber MT Plastic mat .
Plastic mat / Vulkalan mat for Weber MT vibrating plate CF 1 Hd
For gentle vibration of pavement etc.


KKB Weber MT Plastic mat .
Plastic mat / Vulkalan mat for Weber MT vibrating plate CF 2 Hd
For gentle vibration of pavement etc.


KKB Weber MT Reversible vibratory plate 92 kg/15 kn CR 1 Hd
The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.
Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Engine Honda petrol
- Power 2.6 kilowatts
- Working width 350 millimetres
- Centrifugal force 15 kilonewtons
- Working speed max. 20 metres per minute
- Frequency 100 Hertz
- Operating weight CECE 92 kilogrammes


KKB Weber MT Plastic mat .
Plastic mat / Vulkalan mat for Weber MT vibrating plate CR 1 Hd
For gentle vibration of pavement etc.


KKB Weber MT Reversible vibratory plate 143 kg/25 kn CR 2 Hd
The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.
Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Honda petrol engine
- Power 3.6 kilowatts
- Working width 450 millimetres
- Centrifugal force 25 kilonewtons
- Working speed max. 21 metres per minute
- Frequency 100 Hertz
- Operating weight CECE 143 kilogrammes


KKB Weber MT Plastic mat .
Plastic mat / Vulkalan mat for Weber MT vibrating plate CR 2 Hd
For gentle vibration of pavement etc.


KKB Bomag Vibrating plate with stonegard 440 kg/50 kn BPR 50/55 D
By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate.
Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed.
Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone.
As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: diesel
- Power: 6,7 kW
- Working width: 680 mm
- Working speed: 25 m/min
- Frequency: 66 Hz
- Weight: 440 kg


KKB Weber MT Reversible vibratory plate 206 kg/35 kn CR 3
The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.
Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Hatz diesel engine
- Power 3.5 kilowatts
- Working width 500 millimetres
- Centrifugal force 35 kilonewtons
- Working speed max. 20 metres per minute
- Frequency 80 Hertz
- Operating weight CECE 206 kilogrammes


KKB Weber MT Plastic mat .
Plastic mat / Vulkalan mat for Weber MT vibrating plate CR 3
For gentle vibration of pavement etc.


KKB Bomag Vibrating plate with stonegard 482 kg/55 kn BPR 55/65 D
By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate.
Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed.
Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone.
As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: diesel
- Power: 6,8 kW
- Working width: 680 mm
- Working speed: 25 m/min
- Frequency: 66 Hz
- Centrifugal force: 55 kN
- Weight: 482 kg


KKB Weber MT Reversible vibratory plate 281 kg/42 kn CR 5
The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.
Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Engine Hatz diesel
- Power 5.4 kilowatts
- Working width 550 millimetres
- Centrifugal force 42 kilonewtons
- Working speed max. 20 metres per minute
- Frequency 75 Hertz
- Operating weight CECE 281 kilogrammes


KKB Weber MT Plastic mat .
Plastic mat / Vulkalan mat for Weber MT vibrating plate CR 5
For gentle vibration of pavement etc.


KKB Bomag Vibrating plate with stonegard 487 kg/60 kn BPR 60/65 D
By using this worldwide unique paving plate, you achieve unimagined results in terms of area performance, handling and quality and enjoy a drastically reduced breakage rate.
Instead of clamping a plastic mat under the vibratory plate, the STONEGUARD has a gently vibrating shoe made of high-strength plastic permanently installed.
Due to the even distribution of the impact dynamics, everything can be vibrated down to the last stone.
As the plastic shoe of the STONEGUARD rises at the flanks, damage to objects due to bumping can now be avoided.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: diesel
- Power: 6,7 kW
- Working width: 680 mm
- Working speed: 25 m/min
- Frequency: 68 Hz
- Centrifugal force: 60 kN
- Weight: 487 kg


KKB Bomag Reversible vibratory plate 150 kg/25 kn BPR 25/40 D
The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.
Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Engine Hatz-Diesel
- Power 3.1 kilowatts
- Working width 400 millimetres
- Centrifugal force 25 kilonewtons
- Working speed max. 25 metres per minute
- Frequency 85 Hertz
- Operating weight CECE 150 kilogrammes


KKB Bomag Plastic mat .
Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 25/40 D
For gentle vibration of plasters, etc.


KKB Bomag Reversible vibratory plate 155 kg/25 kn BPR 25/50 D
The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.
Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Engine Hatz-Diesel
- Power 3.1 kilowatts
- Working width 500 millimetres
- Centrifugal force 25 kilonewtons
- Working speed max. 25 metres per minute
- Frequency 85 Hertz
- Operating weight CECE 155 kilogrammes


KKB Bomag Plastic mat .
Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 25/50 D
For gentle vibration of plasters, etc.


KKB Bomag Reversible vibratory plate 225 kg/35 kn BPR 35/60 D
The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.
Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Engine Hatz-Diesel
- Power 3.1 kilowatts
- Working width 600 millimetres
- Centrifugal force 35 kilonewtons
- Working speed max. 27 metres per minute
- Frequency 80 Hertz
- Operating weight CECE 225 kilograms


KKB Bomag Plastic mat .
Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 35/60 D
For gentle vibration of plasters, etc.


KKB Bomag Reversible vibratory plate 280kg /40 kn BPR 40/60 D
The lightweight reversible vibratory plates are among the powerful all-rounders for paving work, gardening and landscaping as well as for maintenance work on roads, paths and car parks.
Due to their compact design and great manoeuvrability, the lightweight reversible vibratory plates are ideal for compacting trenches, pavements and other confined areas.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Engine Hatz diesel with electric start
- Power 3.1 kilowatts
- Working width 600 millimetres
- Centrifugal force 40 kilonewtons
- Working speed max. 27 metres per minute
- Frequency 80 Hertz
- Operating weight CECE 280 kilogrammes


KKB Bomag Plastic mat .
Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 40/60 D
For gentle vibration of pavement etc.


KKB Weber MT Reversible vibratory plate 412 kg/55 kn CR 6
Due to highest compaction and area performance, the reversible vibratory plate is especially applicable in road construction and civil engineering up to paving.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Engine Hatz-Diesel
- Power 7.5 kilowatts
- Working width 590 millimetres
- Centrifugal force 55 kilonewtons
- Working speed max. 24 metres per minute
- Frequency 72 Hertz
- Operating weight CECE 412 kilogrammes


KKB Weber MT Plastic mat .
Plastic mat / Vulkalan mat for WeberMT vibrating plate CR 6 .
For gentle vibration of pavement etc.


KKB Bomag Reversible vibratory plate 570 kg/70 kn BPR 70/70 D
Equipped with electric starter, the classic areas of application are soil and asphalt compaction, paving, path, road and track construction, backfilling, trench and canal construction, gardening and landscaping, but also foundation construction.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Engine Hatz diesel
- Power 9.3 kilowatts
- Working width 700 millimetres
- Centrifugal force 70 kilonewtons
- Working speed max. 28 metres per minute
- Frequency 66 Hertz
- Operating weight CECE 575 kilogrammes


KKB Bomag Plastic mat .
Plastic mat / Vulkalan mat for Bomag vibratory plate BPR 70/70 D
For gentle vibration of plasters, etc.


KKB Takeuchi Mini excavator 1,1 T TB 210 R
Particularly compact dimensions and a minimal swivel radius.
This makes it ideal for use in confined spaces, for example in landscaping or on inner-city construction sites.
New boom geometry for max. overloading height of 2,705 mm.
High stability due to hydraulically adjustable running gear from 980 mm to 1,300 mm
Extra-long and -high dozer blade adaptable to track width
- Daily rental includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Operating weight 1865 KG
- Power 15,6 PS
- Digging depth 2390 mm
- Width 980 mm - 1300 mm
- Height 2360 mm
Attachments incl.
- 1 x ditching bucket
- 1 x backhoe bucket


KKB Takeuchi Mini excavator/Hybrid excavator 1,3 T TB 210 RH
Emission-free excavating thanks to electric drive.
Equally powerful electric motor.
Narrow width of 750 mm - passage possible in confined spaces.
High stability due to hydraulically adjustable undercarriages from 750 mm to 1,020 mm.
- Daily rental includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Operating weight 1295 kg
- Power 12 PS
- Digging depth 1755 mm
- Width 750 mm - 1020 mm
- Height 2190 mm
Attachments incl. :
- 1 x ditching bucket
- 1 x backhoe bucket


KKB Takeuchi Mini excavator/Hybrid excavator 1,9 T TB 216 SH
Emission-free excavating due to electric drive.
Particularly compact dimensions and a minimal swing radius.
This makes it ideal for use in confined spaces, for example in landscaping or on inner-city construction sites.
New boom geometry for max. overloading height of 2,705 mm.
High stability due to hydraulically adjustable undercarriages from 980 mm to 1,300 mm.
Extra long and high dozer blade adaptable to track width.
- Daily rental includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Operating weight 1905 kg
- Power 15,1 PS
- Digging depth 2390 mm
- Width 980 mm -1300 mm
- Height 2255 mm
Attachments incl. :
- 1 x ditching bucket
- 1 x backhoe bucket


KKB Stihl Grinder TS 420
Universal, handy cut-off machine.
The 350 mm cutting disc of the powerful Motorflex enables cutting depths of up to 125 mm in concrete, stone, asphalt, construction steel or through iron pipes.
Technical data :
- Displacement 66.7 cm³
- Power 3.2/4.4 kW/hp
- Weight 9.7 kg 1)
- Sound pressure level 98 dB(A) 2)


KKB Bomag Trench roller BMP 8500
Remote-controlled multi-purpose compactor.
With an operating weight of just under 1.6 t, the multi-purpose compactor achieves outstanding compaction results when compacting soil in trench, canal and pipeline construction.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Operating weight 1,595 kg
- Power 14,5 Kw
- Working width 710 mm
- Fuel Diesel


KKB Weber Internal vibrator 58 mm Ivur 58
Fresh concrete in walls and formwork can be effectively compacted with a submersible vibrator.
The vibrator bottle allows the trapped air bubbles to rise and escape through vibration.
This compacts the concrete sustainably.
Careful compaction increases the quality of the erected concrete part.
A built-in RCD protects the operators against earth leakage and short circuits.
The internal vibrators are equipped with 5 m protective hose and 10 m connection cable.
Technical data :
- Bottle diameter : 58 mm
- Bottle length : 420 mm
- Rated power : 1050 W
- Supply voltage : 230 V


KKB Weber Internal vibrator 38 mm MVX 300 / 38
Fresh concrete in walls and formwork can be effectively compacted with a submersible vibrator.
The vibrator bottle allows the trapped air bubbles to rise and escape through vibration.
This compacts the concrete sustainably.
Careful compaction increases the quality of the erected concrete part.
Technical data :
- Motor power (input): 1,2 kW
- Bottle diameter : 38 mm
- Bottle length : 390 mm
- Frequency : 200 Hz
- Weight : 2,3 kg


KKB Husqvarna Electric cut-off grinder K 4000
This all-round electric cut-off machine minimises water, dust and mud build-up.
Unlike other electric cut-off machines, the cut-off wheel rotates forward, allowing efficient cut-off work with little strain on the operator.
The integrated regulator controls the amount of water, ensuring a constant supply of water to the cut-off wheel.
- Includes diamond cutting disc 350 mm Ø for concrete.
Technical data :
- Input power 2.7 kW
- Voltage 220-240 V
- Max. Cutting depth 125 mm
- Max. Cutting disc diameter 350 mm
- Mounting diameter 25.4 mm


KKB Husqvarna Electric cut-off grinder K 4000 Cut-n-Break
Our Cut-n-Break method is the natural choice when you need to cut deep.
With the K 4000 Cut-n-Break you can cut up to 400 mm from one side.
Suitable for flush cutting close to walls and floors, and for smaller jobs such as window openings where you want to avoid overlapping corners.
Technical data :
- Input power 2.7 kW
- Voltage 220-240 V
- Max. Cutting depth 400 mm
- Max. Cutting disc diameter 230 mm


KKB Lissmac Band saw MBS 510
The masonry band saws from LISSMAC are specially designed for the processing of aerated concrete, as well as for various bricks and prove themselves on every construction site.
Technical data:
- Cutting height: 510 mm
- cutting length: 700 mm
- saw band length: 3.750 mm
- Power: 1,1 k W / 400 V


KKB Cedima Stone cutting saw CTS 375.2
For cutting large-format building blocks made of concrete, Poroton or sand-lime bricks.
Technical data:
- Cutting depth: 370 mm
- Cutting length: 960 mm
- Blade: 900 -1000 mm.
- Power: 7.5 kv / 400 v


KKB Lissmac Stone cutting saw DTS 420 PE N
The diamond cut-off saw is ideal for use on masonry work platforms (MAB) and where space is limited, thanks to its compact and vertical design.
Specially designed for plane element and large block processing.
Technical data:
- max. cutting depth: 420 millimeters
- max. cutting length: 650 millimeters
- max. blade Ø: 1000 millimeters
- bore: 60 millimeter


KKB Husqvarna Cut-off grinder K 970
Universal, handy cut-off machine.
The 350 mm cutting disc of the powerful Motorflex enables cutting depths of up to 125 mm in concrete, stone, asphalt, construction steel or through iron pipes.
Technical data :
- Output power 4.8 kW
- Displacement 93.6 cm³
- 2-stroke engine
- Max. Cutting depth 125 mm
- Max. Cutting disc diameter 350 mm
- Mounting diameter 20/25.4 mm


KKB Husqvarna Cut-off grinder K 770 K 770
Universal, handy cut-off machine.
The 350 mm cutting disc of the powerful Motorflex enables cutting depths of up to 125 mm in concrete, stone, asphalt, construction steel or through iron pipes.
Technical data :
- Output power 3.7 kW
- Displacement 73.5 cm³
- 2-stroke engine
- Max. Cutting depth 125 mm
- Max. Cutting disc diameter 350 mm
- Mounting diameter 20/25.4 mm


KKB Schwamborn Concrete milling machine 230 V BEF 201
Concrete and screed milling machine for small to medium sized areas.
The low centre of gravity ensures smooth running and fast, even milling results when removing uneven floors, protrusions, removing markings, milling off coatings.
Technical data:
- Voltage 230 V
- Frequency 50 Hz
- Output power 2.2 kW
- Working width 200 mm
- Working weight 77 kg
- Ø suction 50 mm
- Dimension LxWxH 94 x 37,5 x 90 cm
- Type of slats Carbide slats


KKB Schwamborn Single disc machine STR 701
A robust powerful multi-purpose machine .
Equipped with a 2300 W powerful motor, metal gear drive and extra strong guide bar bearing, the machine is suitable for demanding applications on the construction site.
Technical data :
- Gear drive, metal
- Voltage 230 V
- Frequency 50 Hz
- Input power 2300 W
- Working width 510 mm
- Working weight 58.5 kg
- Rotational speed, tools 156 min-1
- Brush pressure 38 g/cm2
- Torque 110 Nm
- Guide bar length 930 mm
- Noise level 62 dB(A)
Incl. trowel, trowel plate or spring steel brush


KKB Cedima Core drill up to 250 mm C-BMH-160 / P 250
Erschütterungsfreies Nassbohren in Mauerwerk und Beton ermöglicht dieses Kernbohrgerät, das durch die platzsparende Fußplatte selbst Arbeiten auf engstem Raum zulässt.
Das Stativ ist dabei aus leichtem und stabilem Aluminium gefertigt.


DeWalt Alligator Saw DCS397T2
Special battery-powered saw for the toughest applications. Ideal for sawing wood and poroton up to strength class 12 N/mm².
Durable, low-vibration and recoilless double saw blade system with quick saw blade stop within 3 seconds.
Reinforced sword for higher accuracy, more precise cuts and significantly longer service life.
- Saw blade length:430mm
Scope of delivery:
- 2 batterys
- charger
Supplied consumables:
- special saw blade for cutting e.g. poroton, hollow bricks


Bosch Breaker (30 kg) GSH 27 VC
High-performance demolition hammer with 28 mm hexagon socket for demolition work in concrete and stone.
- 62 Joule impact energy for maximum demolition performance.
Scope of delivery:
- Transport trolley for GSH 27
Supplied consumables:
- Pointed chisel
- flat chisel


Bosch Angle Grinder GWS 13-125 CIE
Powerful 125mm angle grinder for high work throughput thanks to powerful 1,300 watt motor with Constant-Electronic. User protection through KickBack Control, restart protection, torsion-proof protective hood and reduction of vibrations.
Scope of delivery:
- Additional handle
- mounting flange
- clamping nut
- protective hood
- two-hole wrench
Supplied consumables:
- Cutting disc Ø 125 mm for metal


Bosch Impact Drill (3 kg) GSB 21-2 RCT
1300 watt high torque impact drill for the heaviest applications with high diameters (drilling, working with hollow core bits and hole saws) as well as screwing and stirring. Constant-Electronic for more comfortable working, keeps speed constant even under load. Torque control for high precision: Torque preselection for even screw insertion.
Scope of delivery:
- Quick-action drill chuck
- depth stop
- additional handle
Supplied consumables:
- Multi-purpose drill set 8 pieces, Ø 3.0 - 8.0 mm


Bosch Concrete Grinder GBR 15 CAG
Powerful concrete grinder with a motor power of 1500 watts for high
Work progress, even under load. Movable protective hood element allows grinding directly to the edges of floors, walls and ceilings.
Supplied consumables:
- Diamond cup wheel Ø 125 mm


Bosch Breaker (17 kg) GSH 16-30
Demolition hammer with 30 mm hexagon socket for demolition work in concrete and stone.
The powerful motor delivers 41 joules of impact energy for outstanding removal performance.
Scope of delivery:
- Additional handle
Supplied consumables:
- Pointed chisel
- flat chisel
- fettube


Bosch Angle Grinder GWS 22-230 LVI
Powerful angle grinder with 230 mm disc diameter.
Optimum handling due to low weight. Vibration control main and additional handle reduces vibrations by up to 50 % for fatigue-free work.
Scope of delivery:
- Mounting flange
- clamping nut
- protective hood
- two-hole wrench
- Additional handle Vibration Control
Supplied consumables:
- Cutting disc Ø 230 mm for metal
- Diamond saw blade Ø 230 mm for concrete


Bosch Line Laser GTL 3
Fast tile laying with additional line at 45°
Projects in addition to the two laser lines at an angle of 90° a third line at 45° for precise and fast alignment and laying of wall and floor tiles.
High accuracy of 0.2 mm/m
- Working range up to 20 m
Scope of delivery:
- aligning washer
- laser target
Supplied consumables:
- 4 x 1.5 V-LR6 battery (AA)


Atika Concrete Mixer Profi 145 S
Professional concrete mixer with handwheel and foot brake for easy operation. With 240 mm plastic elastic wheels, restart protection and GS test protection.
- Motor power: 700 watts
- Drum volume: max. 145 litres
- Protection class: II
- Protection class: IP45
- Net weight: 54 kg
- Dimensions LxWxH: 126 x 68 x 132 cm


Collomix Hand-Held Mixer Xo 4
Robust 2-speed agitator for universal requirements.
- Powerful and powerful for all material viscosities.
- Top ergonomics due to upright working position and handle shape.
- Electronic speed control
- Ideal quantity per mixture 65 litres
Consumables supplied:
- Mixing tool MK 140 HF
- Mixing tool WK 140 HF


Profil Cabel Reel 40m 3x2,5mm² H07RN-F
Robust cable drum with 3-way protective contact sockets
- splash-proof
- 40m 3x2,5mm²
- 230 Volt
- H07RN-F


Profil Extension Cable 25m 3x2,5mm² H07RN-F
Extension cable
25 m 3 x 2.5mm²
230 Volt
H07RN-F


Profil Extension Cable 50m 50m 3x2,5mm² H07RN-F
Extension cable
50 m 3 x 2.5mm²
230 Volt
H07RN-F


Profil Extension Cable 25m 25m 5x2,5mm² H07RN-F
400 V extension cable
25 m 5 x 2,5mm² with CEE plug
H07RN-F
16 A


Profil Extension Cable 50m 50m 5x2,5mm² H07RN-F
400 V CEE Extension cable
50 m 5 x 2,5mm²
H07RN-F
16 A


Belle Electric Compaction Plate PCLX16 45E
Professional, leading vibratory plate with electric motor and a plate size of 450 x 583 mm.
No exhaust / no emissions, ideal for use in indoor and poorly ventilated areas.
8 mm thick, robust base plate for optimum compression.
- Integrated, foldable chassis.
- Engine power : 2.2 KW
- Voltage : 230 Volt
- Centrifugal force : 16.0 kN
- Weight : 97 kg
- Collection best in pairs , or with suitable aids .


Bosch Cordless Angle Grinder GWS 18V 125 -LI SC
Powerful 18 Volt battery angle grinder with 125mm disc diameter and speed preselection adjustable in three steps. Optimum handling due to low weight.
Scope of delivery:
- Transport case
- receiving flange
- clamping nut
- two-hole wrench
- Additional handle
- 2 batteries
- charger
Supplied consumables:
- Cutting discs Ø 125 mm for metal


Norton Tile Cutting Machine Clipper TT 180
Tile cutting machine for easy and clean work.
- Removable water tray - Easy cleaning and filling of water Pivoting cutting table - cuts from 0 - 45° are possible.
- Low weight (11kg) -
- Good handling and easy transport
- Max. Cutting depth at 90° 34 mm
- Max. Cutting depth at 45° 24mm
Scope of delivery :
- Transport case
- Slide disc Classic Ceramic
Rental Delivered Consumables :
- Slide disc 180mm Classic Ceramic


Belle Electric Compaction Plate PCLX12 40E
Light, professional, leading vibratory plate with electric motor and a plate size of 488 x 380 mm.
No exhaust / no emissions, ideal for use in indoor and poorly ventilated areas.
8 mm thick, robust base plate for optimum compression.
Retractable handle, perfect for transport and storage.
- Engine power : 1,5 KW
- Voltage : 230 V
- Centrifugal force :12,0 kN
- Weight : 50 kg


Norton Tile Cutting Machine Clipper TT 250 G
Electric tile cutter with water cooling.
Ideal for cutting wall and floor tiles.
- max. cutting depth at 90° 55 mm at 45° 35 mm
- mains voltage 230 V
- Weight 28kg
Supplied consumables :
- Diamond cutting disc 250x25,4mm


Schwamborn dustextraction STS 130
Ideal dust extraction for e.g. our single disc machine and diamond grinding machine.
Can be used anywhere where a normal vacuum cleaner is not sufficient.
Suitable for the construction industry with effective filter cleaning.
- Suction hose 5m
- mains voltage 230 V
- Power consumption 1.2 KW


Makita Impact drill machine HP 2071 FJ
The percussion drill drills effortlessly through wood, metal and stone.
- Power consumption 1.010 Watt
- Clamping neck 43mm
- Drilling capacity in wood 40 mm
- Drilling capacity in steel 16 mm
- Drilling capacity in masonry 20 mm
- Drill chuck clamping width 1.5 - 13 mm
- With constant electronics and bright LED
Scope of delivery :
- Transport case
- Handle with depth stop
- Universal drill 4,5,6,8 mm


Bosch Rotary hammer drill GBH 4-32 DFR
The GBH 4-32 DFR Professional is the most powerful SDS plus hammer drill.
This power tool is suitable for drilling and chiselling in concrete, masonry, wood and metal.
Technical data:
- Rated input power 900 W
- Impact energy 4.2 J
- Stroke rate at nominal speed 0 - 3,600 bpm
- Rated speed 0 - 800 min-1
- Weight 4,7 kg
- Tool holder SDS-plus
- Voltage, 230 V
Drilling range :
- drill-Ø concrete, hammer drill 6 - 32 mm
- Max. drill-Ø masonry, drill bits90 mm
- Max. Drill diameter in metal 13 mm
- Max. drill-Ø wood 32 mm
Scope of delivery :
- Drill chuck SDS-Plus
- Drill chuck (3 jaws)
- SDS drill set 6,8,10mm
- SDS Pointed chisel
- SDS flat chisel
- Fat tube


Bosch Rotary Hammer (2 kg) GBH 2-26 F
Powerful 830 Watt hammer drill with SDS-plus and quick-change drill chuck for universal applications. A fast all-rounder for daily use on the construction site or around the house.
- Drill-Ø in concrete with hollow core bits max. 68 mm
- Drill-Ø concrete 4 - 26 mm
- Drill-Ø metal max. 13 mm
- Drill-Ø wood max. 30 mm Impact energy 2.7 J (Ideal for e.g. chiselling tiles, chiselling cable slots etc.)
Scope of delivery:
- Quick-change drill chuck
- Exchangeable chuck SDS-plus
- depth stop
- additional handle
Supplied consumables:
- SDS-plus drill bit set Ø 6/8/10 mm
- SDS-plus pointed chisel
- SDS-plus flat chisel
- Chisel grease


Bosch Cordless Rotary Hammer (4 kg) GBH 18 V 26
Powerful 18 Volt SDS-plus battery-powered hammer drill with optimum power-to-weight ratio.
- Drill-Ø in concrete 4 - 26 mm
- Impact energy 2.6 J
Scope of delivery:
- Additional handle
- depth stop
- Quick charger
- 2 x Battery
Supplied consumables:
- SDS-plus drill bit set Ø 6,8,10 mm
- Flat chisel
- Pointed chisel


Makita Battery Impact Drill DHP 459 RTJ / DHP 484
Handy, powerful 18 volt cordless impact drill with switchable percussion mechanism.
Ideal for most applications.
- Torque adjustable in 16 steps.
- Maximum torque 45Nm
Scope of delivery :
- Transport case
- charger
- 2 batteries
- bit set
- Multi-purpose drill set 4,5,6,8,10,12mm
- Wood twist drill set 3,4,5,6,7,8,9,10mm


Makita battery angle grinder DGA 513 RTJ
Very handy battery angle grinder with electronic speed control.
Grinding wheel diameter 125 mm
bore 22,23 mm
Max. Cutting depth 29 mm
Scope of delivery :
- Transport case
- charger
- 2 batteries
- Cutting disc 125x1mm
- Roughing disc 125x6mm


Cedima Core drill C-BMH-160
With the diamond drilling machine you can drill perfect holes in masonry and sand-lime brick using the dry drilling method.
- Connection thread R 1/2" + 1 1/4" UNC
- Voltage (V/Hz) 230/50~60
- Speed (min-1) Load: 600/ 960/ 2780
- Engine power 2 KW
- Must be used in combination with a vacuum cleaner.
- We recommend the use of the drill stand for the drilling process!
Dry core drills usable length 300mm in 61,81,111,131,151,161 mm
drill rig
and suitable vacuum cleaner can be rented separately.
Scope of delivery :
- Drilling motor in transport case
- centering aid


Makita angle grinder(230mm) GA 9020 RFK 3
Powerful angle grinder with 230 mm disc diameter.
Optimum handling due to soft start and low weight.
Power consumption 2200 Watt
Max. Cutting depth 68mm
Ideal for steel and concrete work.
Scope of delivery :
- Diamond cutting disc for concrete work
- steel saw blade


Cedima cans countersink(68mm) DS Maxx Dosensenker 68mm
Diamond socket countersink 68mm for e.g. sockets, can be used in: Masonry sand-lime brick Poroton and similar abrasive materials.
- Use without impact, absolutely pre-drill (6mm).
- Centring drill is only used for guiding when setting up, then removing. and finish drilling without centring drill.
Scope of delivery :
- 68mm socket drill bit
- Center drill 6,5mm
- drift wedge
- Recording 6-kt.
- Recording SDS-Plus


Cedima cans countersink 82mm DS Maxx Dosensenker
Diamond can countersink 82mm for e.g. junction boxes, can be used in: Masonry sand-lime brick Poroton and similar abrasive materials Use without impact, absolutely pre-drill (6mm). Centring drill is only used for guiding when setting up, then removing. and finish drilling without centring drill.
Scope of delivery :
- 82mm socket drill bit
- Center drill 6,5mm
- drift wedge
- Recording 6-kt.
- Recording SDS-Plus


Makita angle grinder(125mm) GA 5040 RKDJ
Powerful handy angle grinder with a disc diameter of 125mm.
Power consumption 1100 Watt.
Mains voltage 230 Volt
Scope of delivery :
- Transport case
- Metal saw blade 125x1mm
- Flange,Clamping nut,Wrench


Makita concrete grinder Trongaard SF 14-125 DR
Ideal for the removal of concrete residues, for levelling, cleaning or light roughening of floors and walls and for the removal of old plaster and structures.
Scope of delivery :
- Transport case
- diamond cup wheel


Makita Wall chaser SG 1251 J
For fast and precise creation of slots and channels in masonry.
Easy handling due to pulling cut.
Super-Joint system prevents setbacks and blockages, effectively protecting machine and user.
Technical data :
- Power consumption 1.400 Watt
- Idle speed 10,000 min-1
- Saw blade Ø / bore 125/22.33 mm
Scope of delivery :
- Transport case
- diamond discs
- face spanner
- 6-Kt L-key 6mm


Cedima diamond core bit 61mm BB-1 T Maxx
Diamond dry core drill Ø 61mm
Useful length 300mm
Connection 1 1/4" UNC socket
Application:masonry,sand-lime brick,poroton,bricks


Cedima Diamond core bit 81mm BB-1 T Maxx
Diamond dry core drill Ø 81mm
Useful length 300mm
Connection 1 1/4" UNC socket
Application:masonry,sand-lime brick,poroton,bricks


Cedima Diamond core bit 111mm BB-1 T Maxx
Diamond dry core drill Ø 111mm
Useful length 300mm
Connection 1 1/4" UNC socket
Application:masonry,sand-lime brick,poroton,bricks


Cedima Diamond core bit 131mm BB-1 T Maxx
Diamond dry core drill Ø 131mm
Useful length 300mm
Connection 1 1/4" UNC socket
Application:masonry,sand-lime brick,poroton,bricks


Cedima Diamond core bit 151mm BB-1 T Maxx
Diamond dry core drill Ø 151mm
Useful length 300mm
Connection 1 1/4" UNC socket
Application:masonry,sand-lime brick,poroton,bricks


Cedima Diamond core bit 161mm BB-1 T Maxx
Diamond dry core drill Ø 161mm
Useful length 300mm
Connection 1 1/4" UNC socket
Application:masonry,sand-lime brick,poroton,bricks


Belle Rubber mat BEOPP/89/DIO
Rubber / protection mat suitable for our Belle electric vibratory plate PCLX16 45E .
So that, for example, the plaster does not get scratches and scrapes when shaken off.


Bosch Battery impact wrench GDS 18V-LI HAT
Battery impact wrench Bosch GDS 18 V-LI HT
- High torque (650 Nm) for hard screw applications in metal (M 12 - M 20) and concrete
- Idling speed 0-1,900 rpm
- Torque, max.650 Nm
- Beat rate 0-2,100 bpm
- Battery voltage 18 V
- Tool holder 1/2" external square
Supplied accessories :
- Socket wrench inserts 77mm long SW 10 - 27 mm
- 10,11,13,17,19,21,22,24,27 mm


Bosch Battery impact drill GSB 18V-85C
Powerful rechargeable percussion drill !
Technical data :
- Torque (soft/hard/max.) 47/85/- Nm
- Idle speed (1st gear / 2nd gear) 0 - 480 / 0 - 2,100 rpm
- Stroke rate, max. 31,500 min-1
- Drill chuck clamping range, min./max. 1.5 / 13 mm
- Battery voltage 18 V Torque steps 25 + 1
Drill diameter :
- drill-Ø wood, max. 82 mm
- Drill-Ø Steel, max. 13 mm
- Drill-Ø Masonry, max. 16 mm
Supplied accessories :
- 2 batteries
- Battery charger
- Bitset
- Multi-purpose drill set
- Wood drill set


Bosch Battery angle grinder GWS 18V-10SC
Cordless angle grinder Bosch GWS 18V-SC
Small angle grinder with the same power as a wired grinder with 1,000 watts thanks to brushless EC motor.
- Idle speed 4,500 - 9,000 rpm
- Battery voltage 18 V
- Grinding spindle thread M 14
- Drill hole 22,23 mm
Supplied accessories :
- 2 batteries 5,0 Ah
- Battery charger
- Cutting discs 125 x 1 mm metal


Bosch Wet/dry vacuum cleaner GAS 35M AFC
Wet/dry vacuum cleaner Bosch GAS 35M AFC
Versatile wet/dry vacuum cleaner with automatic filter cleaning.
L-BOXX can be clicked on as a practical transport and storage solution for mobile use
Permanent suction power for continuous work progress through automatic filter cleaning (AFC)
- As a certified safety vacuum cleaner of dust class M according to EU standard, it covers most of the dust for high user protection
- Max. input power 1,380 W
- Weight 12,4 kg
- Gross tank volume 35 l
- Tank volume net 23 l
- Tank volume net water 19.2 l
- Dust class Wet/dry vacuum cleaner M
- Dust class M
- Tool dimensions (width) 450 mm
- Tool dimensions (length) 515 mm
- Tool dimensions (height) 575 mm
- Filter area 6.150 cm²Max.
- Air flow velocity (turbine) 74 l/sMax.
- negative pressure (turbine) 254 mbar


Gann Moisture meter Hydromette Compact B
Moisture meter Gann Hydromette Compact B
The Compact B is an electronic building moisture indicator with non-destructive measuring method according to the dielectric constant/high frequency measuring principle.
With LCD display and flexibly applicable ball probe for detecting moisture in building materials of all kinds and for detecting the distribution of moisture in walls, ceilings and screeds and other set building materials.
Especially suitable for parquet and tile layers .
Handy quick moisture indicator in pocket size for lightning fast single or series measurements
Power supply:
- 9 V block battery
Building moisture:
- 0 - 100 digits Scan range


Bosch Rotary Hammer (12 kg) GBH 12-52 DV
High-performance SDS-max hammer drill for heavy-duty chiselling work.
This hammer drill is suitable for drilling up to a diameter of 52 mm as well as for heavy chiselling work in concrete and stone.
It features constant speed, restart protection, overload clutch, speed preselection and vibration control for effortless operation in continuous and time-consuming applications.
- Drill-Ø in concrete with hollow core bits
- up to max.150 mm
- Drill-Ø concrete 12 - 52 mm
- Impact energy 19 J
Scope of delivery:
- Additional handle
Supplied consumables:
- 1 x pointed chisel
- 1 x flat chisel
- 1x Fettube


Bosch Chisel hammer GSH 5 CE
The Bosch SDS max impact hammer for convenient handling in time-consuming applications
Vibration control and light weight allow effortless operation in continuous and time consuming applications
The powerful motor delivers 8.3 joules of impact energy for high stock removal
Technical data :
- Rated input power1.150
- Impact energy 2 - 8.3 J
- Stroke rate at nominal speed 1,300 - 2,900 bpm
- Tool holder SDS max
- Voltage, electrical230 V
Supplied accessories :
- Point Chisel
- Flat chisels
- Grease


Bosch Rotary Hammer (5 kg) GBH 5-40 DCE
SDS-max hammer drill for comfortable handling in time-consuming applications.
Fast drilling progress and high removal rate.
Vibration control and low weight allow effortless operation in continuous and time-consuming applications.
- Drill-Ø in concrete with hollow core bits 40 - 90 mm
- Drill-Ø concrete 12 - 40 mm
- Impact energy 8.8 J
Scope of delivery:
- Additional handle
Supplied consumables:
- pointed chisels
- flat chisels
- fettube
- drill 18mm
- drill 30mm


Makita Demolition Hammer(11kg) HM 1213 C
Powerful impact hammer with very high stock removal rate.
The specialist for breakthroughs and demolition work.
With anti-vibration technology AVT
Electronic impact number and impact strength adjustment
- Power consumption 1,510 watts
- Single impact strength 18.6 joules
- Weight 10.8 kg
- Tool taper SDS-Max
Scope of delivery :
- Transport case
- U-shaped handle
- Flat + pointed chisel
- chisel grease


Makita Battery drill DHR 243 RTJ
For drilling, hammer drilling and chiselling.
- With quick-change drill chuck for cylindrical drills.
- Single impact strength 2.0 Joule
- Drilling capacity in concrete 24 mm
- Drilling capacity in wood 27 mm
- Drilling capacity in steel 13 mm
- Tool holder SDS Plus
Scope of delivery :
- Transport case
- charger
- 2 batteries
- Quick-change chuck SDS
- quick-change chuck
- handle
- depth stop
- Flat chisel , Pointed chisel
- concrete drill
- 6 100/165 mm
- 8 100/165 mm
- 10 100/165 mm


Makita rotary hammer HR 2631 FTJ
Lightweight effective hammer drill for drilling and light chiselling work in stone and concrete.
- Ideal for drilling up to 26 mm.
- Power consumption 800 Watt
- single impact strength 2.4 Joule
- Drill performance drill bit up to 68 mm
- Tool taper SDS-Plus
Scope of delivery :
- Transport case
- quick-change chuck
- SDS quick-change chuck
- SDS Plus drill bit
- 6 100/165mm
- 8 100/165mm
- 10 100/165mm
- Flat, pointed and tile chisel
- chisel grease


Makita rotary hammer(4kg) HR 2811 FT
Powerful hammer drill for drilling stone and concrete.
- Ideal for drilling up to 28 mm and light chiselling work.
- With additional vibration damping by spring-mounted handle.
- Power consumption 800 Watt
- single impact strength 2.8 Joule
- Drill power Drill bit 80 mm
- Tool taper SDS-Plus
- Electronically adjustable number of revolutions and impacts With bright LED
Scope of delivery :
- Transport case
- quick-change chuck
- SDS quick-change chuck
- Flat + pointedchisel
- chisel grease


Makita Demolition Hammer(5Kg) HM 0871 C
Handy caulking hammer with high stock removal rate.
With AVT anti-vibration technology
Vibration-damped handle.
SoftNoLoad for less vibration and precise chisel positioning.
- Power consumption 1110 Watt
- single impact strength 8.1 Joule
- Weight 5.6 kg
- Tool taper SDS-Max
Scope of delivery :
- Transport case
- handle
- Flat + pointed chisel
- chisel grease


Bosch Demolition Hammer (10 kg) GSH 11 E
Powerful SDS-max impact hammer with very high stock removal rate.
The specialist for breakthroughs and demolition work.
Extreme impact force with 16.8 Joule for high stock removal rate
Low vibration during operation and idling.
Scope of delivery:
- Additional handle
Supplied consumables:
- flat chisel
- pointed chisel
- fettube


KKB Bomag Vibratory tamper 68 kg/17 kn BT 65
Due to their great manoeuvrability, rammers are suitable for use in confined areas such as narrow trenches and in shoring.
In addition, they can be used for repair work and repairs in earthworks, pipe and pipeline construction, trench and canal construction.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: petrol
- Power: 2.8 kW
- Working width (tamping foot): 280 mm
- Impact force: 17 kN
- Operating weight: 68 kg


KKB Epiroc Hydraulic hammer SB 102
For mounting on our mini-excavators Takeuchi TB 216 / 1.6 - 2.0 T
Attachment Lehnhoff MS 01 with Taklock / quick coupling system
Technical data :
- Operating weight 90 kg
- Power 9 kW
- Diameter of insertion tool 45 mm
- Working length of the tool 265 mm
- Working pressure 100 - 150 bar
- Impact frequency 750 - 2300 blows/min
- Sound power level 115 dB(A)


KKB Epiroc Hydraulic hammer SB 52
For mounting on our mini-excavators Takeuchi TB 210 / 1,1 - 1,3 T
Record Lehnhoff MS 01
Technical data :
- Operating weight 55 kg
- Power 7 kW
- Diameter of insertion tool 40 mm
- Working length of the tool 255 mm
- Working pressure 100 - 150 bar
- Impact frequency 750 - 1700 blows/min
- Sound power level 117 dB(A)


KKB Weber MT Vibratory tamper 32 kg/9,1 kn SRV 300
The particularly light SRV 300 vibratory tamper was specially developed for tamping under pipes and conduits - for compaction in so-called pipe spandrels in trenches.
It can also be used for compacting edge areas of footpaths or when installing drainage.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: petrol
- Power: 1 kW
- Working width (tamping foot): 140 mm
- Impact force: 9.1 kN
- Weight: 32 kg


KKB Weber MT Vibratory tamper 62 kg/18,2 kn SRV 590
Due to their great manoeuvrability, rammers are suitable for use in confined areas such as narrow trenches and in shoring.
In addition, they can be used for repair work and repairs in earthworks, pipe and pipeline construction, trench and canal construction.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: petrol
- Power: 2.8 kW
- Working width (tamping foot): 280 mm
- Impact force: 18.2 kN
- Weight: 62 kg


KKB Weber MT Vibratory tamper 66 kg/18,3 kn SRV 620
Due to their great manoeuvrability, rammers are suitable for use in confined areas such as narrow trenches and in shoring.
In addition, they can be used for repair work and repairs in earthworks, pipe and pipeline construction, trench and canal construction.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: petrol
- Power: 2.8 kW
- Working width (tamping foot): 280 mm
- Impact force: 18.3 kN
- Weight: 66 kg


KKB Bomag Vibratory tamper 58 kg/15 kn BT 60
Due to their great manoeuvrability, rammers are suitable for use in confined areas such as narrow trenches and in shoring.
In addition, they can be used for repair work and repairs in earthworks, pipe and pipeline construction, trench and canal construction.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Fuel: petrol
- Power: 2.8 kW
- Working width (tamping foot): 280 mm
- Impact force: 15 kN
- Weight: 58 kg


KKB Schwamborn Single disc machine petrol /59 kg STR 703
Compact multi-purpose machine with petrol engine and speed control.
The powerful STR 703 in petrol version is extremely robust and ideally suited for use in places without power supply.
The extra powerful 3.6 kW engine also enables use in difficult conditions.
Technical data:
- Petrol drive
- Output power 3.6 kW
- Working width 510 mm
- Working weight 59 kg
- Speed, tools 0-136 min-1
- Brush pressure 38 g/cm2
- Torque 0-212 Nm
- Guide bar length 1200 mm
- Noise level 63 dB(A)
Incl. trowel , trowel plate or spring steel brush


KKB Cedima Floor cutter 200 mm CF 1020
Lightweight, compact floor saw, ideal for sawing concrete floors and repairing car park surfaces and asphalt pavements.
Technical data:
- Engine power: 8.7 kW
- Engine type: petrol
- Engine start: Reverse start
- Cutting depth adjustment: hand wheel
- Feed: manual
- Cutting depth max. 200 mm
Optionally with diamond blade for asphalt or concrete


KKB Cedima Floor cutter 170 mm CF 13.2 B
Lightweight, compact floor saw, ideal for sawing concrete floors and repairing car park surfaces and asphalt pavements.
Technical data:
- Cutting depth up to 170 mm
- Power: 8.7 kW / 11.8 hp
- Engine type: petrol
- Cutting depth adjustment: hand wheel
- Feed: manual
Optionally with diamond disc for asphalt or concrete


KKB Husqvarna Floor cutter 160 mm FS 400 LV
Lightweight, compact floor saw, ideal for sawing concrete floors and repairing car park surfaces and asphalt pavements.
Technical data:
- Cutting depth max 162 mm
- Power: 8,7 kW
- Engine type: petrol
- Cutting depth adjustment: hand wheel
- Feed: manual
Optionally with diamond blade for asphalt or concrete


KKB Husqvarna Floor cutter 190 mm FS 413
Lightweight, compact floor saw, ideal for sawing concrete floors and repairing car park surfaces and asphalt pavements.
Technical data:
- Cutting depth max 189 mm
- Power: 8,7 kW
- Engine type: petrol
- Cutting depth adjustment: hand wheel
- Feed: manual
Optionally with diamond blade for asphalt or concrete


KKB Weber MT Roller vibrator 108 kg/8 kn VPR 450
This machine was specially developed for the high demands of vibrating paved surfaces and slabs.
The roller vibrator rolls gently over the material. This prevents the slabs or paving stones from shifting or even breaking off corners and edges.
Sensitive concrete slabs with a relatively low thickness can thus be gently pressed into the bedding.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Working width: 420 mm
- Fuel: petrol
- Power: 3.6 kW
- Centrifugal force: 8 kN
- Frequency: 100 Hz
- Weight: 108 kg


KKB Weber MT Roller vibrator 175 kg/14 kn VPR 700
The machine was specially developed for the high demands of jogging large-format panels.
The VPR 700 rolls gently over the material. This prevents the panels from shifting or even breaking out corners and edges.
While the VPR 700 is especially suitable for larger surfaces, the VPR 450 is more suitable for smaller surfaces or slabs up to 30 cm edge length.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data:
- Working width: 670 mm
- Fuel: petrol
- Power: 3.6 kW
- Centrifugal force: 14 kN
- Frequency: 100 Hz
- Weight: 175 kg


KKB Cedima Diamond drill bit 151 mm
Universal diamond wet core bit Ø 151 mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 101 mm
Universal diamond wet core bit Ø 101mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 121 mm
Universal diamond wet core bit Ø 121 mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 131 mm
Universal diamond wet core bit Ø 131mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 111 mm
Universal diamond wet core bit Ø 111mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 81 mm
Universal diamond wet core bit Ø 81 mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 91 mm
Universal Diamant Nassbohrkrone Ø 51mm
Nutzlänge 400mm
Anschluss 1 1/4" UNC Muffe
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 71 mm
Universal diamond wet core bit Ø 71mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 61 mm
Universal diamond wet core bit Ø 61mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 51 mm
Universal diamond wet core bit Ø 61mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 181 mm
Universal diamond wet core bit Ø 181 mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 201 mm
Universal diamond wet core bit Ø 201 mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 161 mm
Universal diamond wet core bit Ø 161mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Cedima Diamond drill bit 171 mm
Universal diamond wet core bit Ø 171mm
Useful length 400mm
Connection 1 1/4" UNC socket
- We only rent out diamond core bits in conjunction with our core drilling rig !


KKB Bosch Chisel hammer 5kg GSH 5 CE
The Bosch SDS max impact hammer for convenient handling in time-consuming applications
Vibration control and light weight allow effortless operation in continuous and time consuming applications
The powerful motor delivers 8.3 joules of impact energy for high stock removal
Technical data :
- Rated input power1.150
- Impact energy 2 - 8.3 J
- Stroke rate at nominal speed 1,300 - 2,900 bpm
- Tool holder SDS max
- Voltage, electrical230 V
Supplied accessories :
- Point Chisel
- Flat chisels
- Grease


KKB Bosch Rotary Hammer 5 kg GBH 5-40 DCE
SDS-max hammer drill for comfortable handling in time-consuming applications.
Fast drilling progress and high removal rate.
Vibration control and low weight allow effortless operation in continuous and time-consuming applications.
- Drill-Ø in concrete with hollow core bits 40 - 90 mm
- Drill-Ø concrete 12 - 40 mm
- Impact energy 8.8 J
Scope of delivery:
- Additional handle
Supplied consumables:
- pointed chisels
- flat chisels
- fettube


KKB Bosch Rotary Hammer 8 kg GBH 8-45 DV
High-performance SDS-max hammer drill for medium-heavy chiselling work.
This hammer drill is suitable for drilling holes up to a diameter of 45 mm and for medium-heavy chiselling work in concrete and stone.
Technical data :
- Power: 1.5 kW / 230 V
- Impact energy: 12,5 J
- Drill bit holder: 12 - 45 mm SDS-max
- Hollow drill bit: up to 125 mm
- Weight: 9,5 kg
Supplied consumables:
- Pointed chisel
- Flat chisel
- Grease tube


KKB Bosch Chisel Hammer 11 kg GSH 11 E
Powerful SDS-max impact hammer with very high removal rate.
The specialist for breakthroughs and demolition work.
Extreme impact force with 16.8 joules for high removal rate
Low vibration during operation and idling.
Scope of delivery:
- Auxiliary handle
Supplied consumables:
- Flat chisel
- Pointed chisel
- Grease tube


KKB Bosch Demolition Hammer 27 kg GSH 27 VC
Heavy-duty demolition hammer with 28 mm hexagon socket for demolition work in concrete and stone.
62 joules of impact energy ensure maximum demolition performance.
Supplied consumables:
- Pointed chisel
- Flat chisel


KKB Probst Manual laying tool Speedy VS 140/200
The powerful vacuum blower sucks up even highly porous slab coverings and exposed aggregate concrete surfaces quickly and safely.
The load capacity with handles is 140 kg.
In conjunction with the corresponding suction plates and the suspension eye with chain safety device, it can safely lift and move VS-EH elements weighing up to 200 kg.
We have various suction plates for different applications (on request).
Technical data :
- Power supply 230 V 50 Hz
- Power consumption 1.5 kW
- Dead weight 20 kg
- Temperature range +3 to +40 °C
- Noise level (DIN 45 635) <78 dB(A)


KKB Probst Stone magnet SM 600 Greenline
The Probst vacuum attachment stone magnet SM-600 is a handy, powerful and mains-independent load attachment. ,
It is used in conjunction with any lifting gear for laying suction-proof stone slabs, concrete elements, steps, vitrified clay pipes, etc.
We have various suction plates for different applications (on request).
Technical data :
- Operating voltage : 12 V
- Dead weight : 34 kg
- Load capacity : 600 kg


KKB Bosch Demolition hammer 16 kg GSH 16-30
Demolition hammer with 30 mm hexagon socket for demolition work in concrete and stone.
The powerful motor delivers 41 joules of impact energy for outstanding removal performance.
Scope of delivery:
- Additional handle
Supplied consumables:
- Pointed chisel
- flat chisel
- fettube


KKB Takeuchi Mini excavator 1,8 T TB 216
Particularly compact dimensions and a minimal swivel radius.
This makes it ideal for use in confined spaces, for example in landscaping or on inner-city construction sites.
New boom geometry for max. overloading height of 2,705 mm.
High stability due to hydraulically adjustable running gear from 980 mm to 1,300 mm
Extra-long and -high dozer blade adaptable to track width
- Daily rental includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Operating weight 1865 KG
- Power 15,6 PS
- Digging depth 2390 mm
- Width 980 mm - 1300 mm
- Height 2360 mm
Attachments incl.
- 1 x ditching bucket
- 1 x backhoe bucket


Schwamborn Diamond Grinding Machine DSM 250
Ideal for edgeless grinding of medium-hard concrete, regulation of uneven floors, removal of e.g. levelling compounds. Grinding close to the edge by means of a grinding head that can be swivelled on both sides.
- Working width 250mm
- Speed 1450 rpm
- Voltage 230 V
- Power output 2.2KW
The suction nozzle has a diameter of 50mm ,
suitable suction cup can be rented separately from us.
Always align the machine with the spirit level before commissioning.
Supplied consumables :
- Diamonds EX-GC 40E


KKB Schwamborn Single disc machine 400 V / 66 kg STR 702
A robust powerful multi-purpose machine with infinitely variable speed control from 78 to 156 min-1.
Equipped with a 2200 W powerful motor, metal gear drive and extra strong guide bar bearing, the machine is for demanding applications on the construction site.
Technical data:
- Gear drive, metal
- Voltage 400 V
- Frequency 50 Hz
- Output power 2.2 kW
- Working width 510 mm
- Working weight 66 kg
- Speed, tools 78-156 min-1
- Brush pressure 43 g/cm2
- Torque 135 Nm
- Guide bar length 1200 mm
- Noise level 62 dB(A)
Incl. trowel , trowel plate or spring steel brush


KKB Weber MT Vibratory plate forward running 60 kg/10 kn CF 1 Hd
The vibratory plate CF 1 Hd is used for compaction in confined areas, for light repair work and paving work in gardening and landscaping.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Working width : 350 mm
- Centrifugal force : 10 kn
- Own weight : 60 kg
- Fuel : Petrol



KKB Bomag Vibratory plate forward running 90 kg/18 kn BVP 18/45
Small forward-moving vibratory plate for the most common applications in repairs and repair work in earthworks, asphalt and paving.
- Daily rent includes 8 operating hours, additional hours will be charged manually.
- Machine must be returned cleaned and fully fuelled !
Technical data :
- Working width : 450 mm
- Centrifugal force : 18 kn
- Own weight : 90 kg
- Fuel : Petrol


KKB Traub Stone dry saw 400 V Multi-Stone 520
All-round band saw. Work completely without water in dry cutting.
Effortless cutting of edges in curved cut.
For stone work from soft to hard.
Technical data:
- Cutting height: 505 mm
- Cutting height without suction: 520 mm
- Cutting length: 660 mm
- Loadable up to 100 kg
- Power: 2.2 kW / 400 V


Schwamborn single disc STR 581
Single-disc machine for a wide range of applications.
For example, sanding and oiling wooden parquet floors, or cleaning exposed aggregate concrete slabs.
- Working width 420mm
- Voltage 230 V
- Input power 1800 Watt
- Adjustable speed 57-171 rpm
We also offer a suitable dust extraction system: Schwamborn STS 130


KKB Schwamborn Diamond grinding machine DSM 250
Edge grinder for ergonomic concrete grinding.
The edge grinder for fast, easy and back-friendly grinding of floor edges without stressing the knees.
The swivelling grinding head allows working in three positions: Left-Right-Straight.
The free-floating dust guard ensures jam-free and low-vibration edge sanding.
- Working width 250mm
- Speed 1450 rpm
- Rated voltage 230 V
- Rated frequency 50 Hz
- Rated current 8 A
- Rated/output power 2.2KW
- Weight 62 kg
Always align the machine using the spirit level before commissioning.
Accessories supplied :
- Dust cover
Excess for damage to machine 500,- €


Bosch Wall Chaser GNF 35 CA
Stone and concrete are not much of an obstacle for the powerful wall groover.
The two 150-millimetre diamond discs are driven by a powerful 1400-watt motor.
The "Constant Electronic" system ensures a constant speed so that the wall groover works quickly and swiftly through the masonry.
- The distance between the two discs can be adjusted between 3 and 39 millimetres as required
- in depth up to 35 millimetres
Afterwards, the remaining web can simply be broken out.
- The scope of delivery includes three 4-millimetre and four 6-millimetre spacer discs
- a mounting flange
- a tool for breaking out the remaining masonry bar
- a workman's case
- a round nut
- and a cranked two-hole spanner
Supplied consumables:
- 2 diamond blade


KKB Husqvarna Floor grinding machine PG 280 S
Single-disc sanding machine for removing e.g. tile adhesive.
It thoroughly removes adhesives, varnishes, epoxy layers and filler.
With a grinding width of 280mm it is suitable for small to medium concrete surfaces.
Technical data :
- Voltage 220-240 V
- Rated current 13 A
- Output power 2,2 kW
- Diameter of grinding cup 280 mm
- Grinding wheel speed 1,410 rpm
- Max. grinding pressure 25 kg
- Weight 76 kg
Excess for damage to machine 500,- €


Cedima Table Saw CTS 56
Powerful stone cutting saw.
- Smooth-running roller table with adjustable side stop.
- Cooling water supply by electric water pump.
- Easy cleaning due to combination of water tray with overflow plug and bucket.
- Easy to load and transport due to foldable feet, transport rollers, carrying handles and crane eyes.
Technical data :
- max. cutting depth approx.100 mm (with 350mm slide disc)
- max. cutting length 600 mm
- Mains voltage 230 V
Supplied consumables :
- Diamond disc 350mm for concrete


KKB Bosch Wall groove cutter GNF 35 CA
Stone and concrete are not much of an obstacle for the powerful wall groover.
The two 150-millimetre diamond discs are driven by a powerful 1400-watt motor.
The "Constant Electronic" system ensures a constant speed so that the wall groover works quickly and swiftly through the masonry.
- The distance between the two discs can be adjusted between 3 and 39 millimetres as required
- in depth up to 35 millimetres


KKB Cedima Table saw long CTS 81 L
The large cutting length makes the table saw particularly suitable for cutting long stone slabs.
With their infinitely adjustable, precise and smooth-running pendulum cutting saw heads, they ensure fatigue-free working.
For mitre cuts, the saw's superstructure can be infinitely tilted from 0° to 45°.
Technical data:
- max. cutting depth: 100 millimetres (with 350 mm slide disc)
- max. cutting length: 1250 millimetres
- Mains voltage 230 V
Supplied consumables:
- Diamond disc 350mm for concrete


KKB Cedima Table Saw CTS 56
Powerful stone cutting saw.
- Smooth-running roller table with adjustable side stop.
- Cooling water supply by electric water pump.
- Easy cleaning due to combination of water tray with overflow plug and bucket.
- Easy to load and transport due to foldable feet, transport rollers, carrying handles and crane eyes.
Technical data :
- max. cutting depth approx.100 mm (with 350mm slide disc)
- max. cutting length 600 mm
- Mains voltage 230 V
Supplied consumables :
- Diamond disc 350mm for concrete